Geri Dön

Development of flexible sensors with conjugated polymers

Konjuge polimerlerle esnek sensörlerin geliştirilmesi

  1. Tez No: 826423
  2. Yazar: AYBÜKE BÜŞRA ÖZER
  3. Danışmanlar: DR. ÖĞR. ÜYESİ ERIC MENG MENG TAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Polimer Bilim ve Teknolojisi, Polymer Science and Technology
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2023
  8. Dil: İngilizce
  9. Üniversite: Sabancı Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Üretim Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Esnek elektrot tabanlı sensörler, esnek ve bükülebilir malzemeleri içeren özel bir algılama teknolojisidir. Geleneksel sert elektrotlardan farklı olarak, bu sensörler düzensiz yüzeylere uyum sağlamak veya esnek alt tabakalara entegre edilmek üzere tasarlanmıştır, bu da esneklik ve uyum sağlama gerektiren çeşitli uygulamalarda kullanılmalarını sağlar. Bu tez çalışması, konjuge polimerlerin iletken yüzeylerle entegrasyonuyla esnek sensörlerin geliştirilmesini amaçlamaktadır. Bu hedef doğrultusunda, açık devre potansiyeli ölçümleri yaparak farklı pH değerlerini değerlendirilen Polianilin (PANI) kaplamalı bir elektrokimyasal pH sensörü tasarlandı. İkinci sistem ise Polidiasetilen (PDA) ile kaplanmış aralıklı elektrot (IDE) tabanlı bir gaz sensörünü içermekteydi. Gaz sensörünün duyarlılığı, LCR metre kullanarak empedans değerlerindeki değişikliklerin izlenmesiyle değerlendirildi. Her iki sensör sistemi, E-ışını buharlaştırma yöntemi kullanılarak PET film üzerine gümüş (Ag) elektrotların oluşturulması ve ardından ilgili duyarlı algılama malzemelerinin damlatma yöntemiyle uygulanmasıyla üretildi. Sonuçlar, çeşitli pH değerlerini algılayabilen esnek PANI kaplamalı bir pH sensörünün başarılı bir şekilde gerçekleştirildiğini ve asetik asit karşısında duyarlılık gösteren PDA kaplamalı bir gaz sensörünün olduğunu göstermiştir. Bu bulgular, sağlık ve gıda gibi alanlar potansiyel uygulamalarda esnek sensör teknolojilerinin ilerlemesine katkıda bulunmaktadır.

Özet (Çeviri)

Flexible electrode-based sensors are a specific type of sensing technology that incorporates flexible and bendable materials as the sensing elements. Unlike conventional rigid electrodes, these sensors are designed to adapt to irregular surfaces or be integrated into flexible substrates, enabling their utilization in various applications where flexibility and conformability are essential. This thesis study aims to develop flexible sensors by integrating conjugated polymers with conductive surfaces. To pursue this objective, two distinct sensor systems were developed and investigated for their potential applications. Initially, an electrochemical pH sensor with a Polyaniline (PANI) coating was designed. The pH sensitivity of the sensor was evaluated by performing open-circuit potential measurements using a potentiostat. The second system involved an interdigitated electrode (IDE) based gas sensor coated with Polydiacetylene (PDA). The sensitivity of the gas sensor was assessed by monitoring the changes in impedance values using an LCR meter. Both sensor systems were fabricated by depositing patterned silver (Ag) electrodes onto PET film using the E-beam evaporation method, then applying the respective responsive sensing materials using the drop cast method. The results demonstrated the successful realization of a flexible PANI-coated pH sensor capable of detecting various pH values and a PDA-coated gas sensor exhibiting sensitivity towards acetic acid. These findings contribute to the advancement of flexible sensor technologies for health and food-related potential applications.

Benzer Tezler

  1. Synthesis and applications of new polyaniline-based polymers and its composites

    Yeni polianilin esaslı polimer ve kompozitlerinin sentezlenmesi ve uygulamaları

    FATMA TUBA ÇOĞALMIŞ

    Doktora

    İngilizce

    İngilizce

    2025

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. BAHİRE FİLİZ ŞENKAL

  2. Fabrication and characterization of P3HT-WO3 hybrid thin films and device applications

    P3HT-WO3 hibrit ince filmlerin üretimi, karakterizasyonu ve cihaz uygulamaları

    FATMA BEYZA YEDİKARDEŞ ER

    Doktora

    İngilizce

    İngilizce

    2024

    Kimyaİstanbul Teknik Üniversitesi

    Nanobilim ve Nanomühendislik Ana Bilim Dalı

    PROF. DR. ESRA ZAYİM

    PROF. DR. MUSTAFA ALTUN

  3. Ditiyeno[2,3-b;3',2'-d]Tiyofen ve Tiyeno[2,3-b]Tiyofen temelli organik elektronik ve optoelektronik malzemelerin sentezleri ve özelliklerinin incelenmesi

    Preparation and investigation of the properties of electro and optoelectro active materials based on Dithieno[2,3-b;3',2'-d]Thiophene and Thieno[2,3-b]Thiophene

    ŞULE TAŞKIRAN ÇANKAYA

    Doktora

    Türkçe

    Türkçe

    2014

    Kimyaİstanbul Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. TURAN ÖZTÜRK

  4. Nanostructuredpolythiophene hybrid chargetransfer complexes

    Başlık çevirisi yok

    EMİN ISTİF

    Doktora

    İngilizce

    İngilizce

    2018

    KimyaUnıversıdad de Zaragoza

    DR. WOLFGANG MASER

  5. Synthesis of thienothiophene based materials and investigation of their electronic and optoelectronic properties

    Tiyenotiyofen bazlı malzemelerin sentezi ve elektronik ve optoelektronik özelliklerinin araştırılması

    ESRA ŞAHİN

    Yüksek Lisans

    İngilizce

    İngilizce

    2025

    Kimyaİstanbul Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. TURAN ÖZTÜRK