Linear parameter varying control of time-delayed systems and an application to air-fuel ratio control
Başlık çevirisi mevcut değil.
- Tez No: 403118
- Danışmanlar: PROF. KAROLOS GRIGORIADIS
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2014
- Dil: İngilizce
- Üniversite: Unıversıty Of Houston
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
In this thesis one of the recently developed gain scheduling control methods, the linear parameter varying (LPV) technique is demonstrated. Starting from the basic definitions of an LMI, important derivations of time delayed control design conditions are derived. In subsequent steps, a motivating example is shown such that the stability and performance of the system is guaranteed in the full operating envelope. The thesis consists of methods and derivations to address time-delayed LPV plants. The synthesis conditions show that the proposed controllers are not only capable of compensating the delay bound but also its rate variation bound. A main benefit of the obtained controllers is that the scheduling of the parameters lead to a robust behavior even for large delay variation and rate. Numerical examples are used to compare the past methods and the current results on the analysis and control design of the same system. Finally the internal combustion engine air-fuel ratio problem is investigated with the help of the derived output-feedback controller design results. The same problem is addressed with a Smith Predictor based Internal Model Control technique to satisfy desired transient and steady-state response characteristics. The LPV control shows better performance compared to the IMC method for small values of the delay. Simulations are used to evaluate the results for larger values of the delay. For large values of the delay the bounds on the Lyapunov –Krasovskii approach introduce some conservatism in the control design and thus, performance specifications are compromised.
Benzer Tezler
- İki serbestlik dereceli bir gimbal sisteminin modellenmesi, tanılanması ve gerçek zamanlı kontrolü
Modelling, identification and real-time control of a two-degree-of-freedom gimbal system
BATUHAN KALKAN
Yüksek Lisans
Türkçe
2025
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. AYHAN KURAL
- Düzensiz örneklemeli sistemlerin kontrolü
Control of nununiformly sampled systems
UFUK SEVİM
Doktora
Türkçe
2024
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
PROF. DR. AFİFE LEYLA GÖREN
- Bulanık PID kontrolörleri için birleştirme operatörüne dayalı yeni bir öz-ayarlama yöntemi tasarımı
A novel self-tuning method based on aggregation operator for fuzzy PID controllers
ÇAĞRI GÜZAY
Yüksek Lisans
Türkçe
2014
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ENGİN YEŞİL
- Gecikmeli rezonatör yöntemine yeni bir yaklaşım
A new approach to delayed resonator vibration absorbers
OYTUN ERİŞ
Doktora
Türkçe
2017
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
PROF. DR. SALMAN KURTULAN
- Yakın geçmişteki nükleer reaktör dinamik analiz yöntemlerine bir bakış
Başlık çevirisi yok
MURAT ALGÜL
Yüksek Lisans
Türkçe
1996
Nükleer Mühendislikİstanbul Teknik ÜniversitesiNükleer Enerji Mühendisliği Ana Bilim Dalı
DOÇ. DR. ERDİNÇ EDGÜ