Farklı katkı maddeleri kullanımının tahin helvası emulsiyon stabilitesi ve kalitesine olan etkilerinin belirlenmesi üzerine bir çalışma
A study on determination of the effects of using different food additives on emulsion stability and quality of tahin helva
- Tez No: 259577
- Danışmanlar: YRD. DOÇ. DR. MURAT ZORBA
- Tez Türü: Yüksek Lisans
- Konular: Gıda Mühendisliği, Food Engineering
- Anahtar Kelimeler: Tahin Helvası, Emulsion Stability, Emulgator, Sorbitols Esters
- Yıl: 2009
- Dil: Türkçe
- Üniversite: Çanakkale Onsekiz Mart Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Gıda Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada Türk Gıda Kodeksi tahin helvası tebliğinde emulgatör olarak kullanımına izin verilen katkı maddelerinin tahin helvasına eklenerek, helvada görülen yağ salma probleminin çözülmesi amaçlanmıştır. Bu amaçla; sorbitan tristearat (STS, 3,5 g/kg), sorbitan monopalmitat (SMP, 3,5 g/kg) ve sorbitan tristearat: sorbitan monopalmitat (1:1) karışımı (K2, 2 g/kg) eklenerek üretilmiş helvalar, üç farklı sıcaklıkta (20, 30 ve 40 ? C) depolanmış ve katkı maddesi çeşidi, depolama sıcaklığı ve depolama süresinin helvaların fiziksel, kimyasal ve duyusal kalitesi üzerine olan etkileri incelenmiştir. Söz konusu faktörlerin helvaların fiziksel, kimyasal ve duyusal özelliklere etkisi Tekrarlanan Ölçümlü Deneme Düzeninde Varyans Analizi Tekniği ve Friedman testi kullanılarak araştırılmıştır.Katkı maddelerinin kullanımının, helvaların yağ miktarı hariç diğer fiziksel, kimyasal ve duyusal özelliklerine etkisi görülmezken, depolama süresi ve sıcaklığının ise söz konusu özellikler üzerine etkilerinin olduğu saptanmıştır. Helvaların dokusal delme kuvvetinin, depolama süresi ve sıcaklığın artmasıyla arttığı gözlenmiştir. Tüm depolama sıcaklıklarında depolama boyunca helvaların L* renk değerinde önemli bir değişim gözlenmezken, -a renk değerlerinde 20 ? C ve 30 ? C' sıcaklıkta bir azalma, 40 ? C'de sıcaklıkta ise bir artma olmuştur. Üretilen tüm helva örneklerinin nem miktarındaki değişimin depolama boyunca 20 ? C'de daha fazla olduğu saptanmıştır. Tüm depolama sıcaklıklarında helvaların protein, kül ve toplam şeker miktarlarında depolama süresince istatistiksel açıdan önemli bir değişim gözlenmemiştir. K2 karışımının helvalarda yağ salmanın engellenmesinde, söz konusu katkı maddelerinin tek tek kullanılmalarına göre daha olumlu etki gösterdiği görülmüştür. Helvaların görünüş, doku ve lezzet özelliklerine ait puan ortalamaları depolama süresince düşüş göstermiştir. Doku özelliğine ait puan ortalamalarındaki düşüşler 20°C ve 40oC'de depolanan örneklerde 12. günden sonra, 30oC'de depolanan örneklerde ise 36. günden sonra önemli olmuştur. Helvaların lezzet özelliğine ait puan ortalamaları ait düşüşlerin ise depolamanın 12. günden itibaren önemli olduğu görülmüştür.Anahtar Kelimler: Tahin Helvası, Emülsiyon Stabilitesi, Emülgatör, Sorbitol Esterleri
Özet (Çeviri)
In this study, it was aimed to solve the oil separation problem occured in tahin helva by using food additives permitted as a emulgator for tahin helva in the Turkish Food Codex. For this purpose; the food additives, namely sorbitan tristerate (STS) (3,5 g/kg), sorbitan monopalmitate (SMP)(3,5 g/kg) and their combinations (1:1) (K2) (2 g/kg) were added to tahin helva, then helva samples were stored at the storage temperatures of 20, 30 and 40°C The effects of food additives, storage temperature and storage time on physical, chemical and sensory properties of tahin helva were investigated and evaluated by using Variance Analysis of Repeated Measurement and Friedman Test.It was determined that the food additives did not have any effect on phyical, chemical and sensory properties of tahin halva except on oil contents, whereas storage temperature and storage time had some effects on those helva properties. It was observed that textural penetration forces of halva have increased by increasing the storage time and storage temperature. It was found that there was an decrease in -a color value of helva through the storage time at the storage temperatures of 20 and 30°C, whereas there was an increase in that value at the storage temperature of 40°C. On the other hand, no significant changes in L* color value of all halva samples were observed through the storage at all selected storage temperatures. The highest change in the moisture content of all halva samples through storage was observed at 20°C. During the storage period, no significant changes in protein, ash and total sugar contents of all halva samples were observed for all storage temperatures. It was found that K2 formulation was more effective than SMP and STS formulations in preventing oil seperation in tahin halva. Sensory scores for apparance, texture and flavor characteristics of halva decreased during the storage period. It was found that the decrease for texture scores was significantly different after 36 and 12 days of storage at the temperatures of 30°C and other selected temperatures (20 ? C and 40°C), respectively. The decrease for flavor scores was also found to be significantly different after 12 days of storage for all selected temperatures.
Benzer Tezler
- PA 66 kompound malzemeden imal edilmiş asansör kapı makaralarının tribolojik özelliklerinin incelenmesi
Analyses of the tribological characteristics of elevator door rollers made of compound PA 66 material
YUSUF EREN ERDOĞDU
Yüksek Lisans
Türkçe
2014
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. İBRAHİM MEHMET PALABIYIK
- Kentsel atıksu arıtma tesisi anaerobik çamur çürütücülerinin dinamik proses modelleme yaklaşımı ile analizi
Analysis with dynamic process modeling approach of anaerobic sludge digesters of the urban wastewater treatment plant
KERİM EKİCİ
Yüksek Lisans
Türkçe
2018
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. HAYRETTİN GÜÇLÜ İNSEL
- Yüksek dozajda kimyasal katkı kullanımının mikro beton özeliklerine etkisinin analizi ve modellenmesi
Analyzing and modeling the effect of high dosage admixture usage on micro concrete properties
ÖZGÜN ATEŞİN
Doktora
Türkçe
2017
İnşaat MühendisliğiEskişehir Osmangazi Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. İLKER BEKİR TOPÇU
- Boyalara ve kaplamalara nano metal oksit katkısının fiziksel, antikorozif ve antibakteriyel etkilerinin incelenmesi
Determination of physical, antiorrosive and antibacterial effects of nano metal oxide additives to paints and coatings
EZGİ KIZILKONCA DURAN
- Tavuk etinde antibiyotik kalıntılarının HPLC yöntemiyle belirlenmesi
Determination of antibiotic residues in chicken meat by HPLC method
TUĞBA YILDIZ
Yüksek Lisans
Türkçe
2014
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. BİRSEN DEMİRATA ÖZTÜRK