Robot kolu uygulamaları için bir çevre modelleyici
Başlık çevirisi mevcut değil.
- Tez No: 24234
- Danışmanlar: DOÇ. DR. SERDAR KORUKOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Computer Engineering and Computer Science and Control
- Anahtar Kelimeler: Robot kolu, Çevre modelleyici, Robot arm, Environment modeler
- Yıl: 1992
- Dil: Türkçe
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Bilgisayar Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
SUMMARY Developments in production technology directly affects developments in robot technology. Robot planning and programming systems are growing fast in order to increase the abilities of robot arms. Despite its simplicity, end-effector level programming has many problems. To solve these problems, task level programming is required. Task level programming forces the development of a general purpose planner. Because of the high logical level of a genereal purpose planner according to robot mechanics, inter-level modules must be produced seperately. Motion planner and environment modeler modules are generated because of this reason. This work deals with the environment modeler design. Environment modeler can be expressed by several sub-modules : world modeler, robot modeler, geometric modeler, message manager. World modeler sub-module is responsible of consistent mapping of physical world to computer based environment and saving geometric information of world model. At this point the solid modeling strategy becomes important. Among several modelling techniques, a suitable design method is generated from constructive solid geometry, sampling method and boundary representation. A simulation environment must also be generated for the robot arm that is to be used. This is handled by several geometric algorithms dependent of solid modeling method and robot kinematics information. The user interface that is used in environment modeler must be an efective interface between user, the planner, the robot model, 75and the total world model. The system that is developed, manages this «job by using a graphical kernel system package (GDDM). There is a continuous communication between environment modeler and the other planning modules. This communication is realized by message passing mechanism. To do this, message passing is standardized by modeling these modules as objects. These three modules are integrated as a robot arm planning system and tested on several sample inputs. Results are obtained consiquently and applied on the RHINO XR-3 series robot-arm. 76
Özet (Çeviri)
SUMMARY Developments in production technology directly affects developments in robot technology. Robot planning and programming systems are growing fast in order to increase the abilities of robot arms. Despite its simplicity, end-effector level programming has many problems. To solve these problems, task level programming is required. Task level programming forces the development of a general purpose planner. Because of the high logical level of a genereal purpose planner according to robot mechanics, inter-level modules must be produced seperately. Motion planner and environment modeler modules are generated because of this reason. This work deals with the environment modeler design. Environment modeler can be expressed by several sub-modules : world modeler, robot modeler, geometric modeler, message manager. World modeler sub-module is responsible of consistent mapping of physical world to computer based environment and saving geometric information of world model. At this point the solid modeling strategy becomes important. Among several modelling techniques, a suitable design method is generated from constructive solid geometry, sampling method and boundary representation. A simulation environment must also be generated for the robot arm that is to be used. This is handled by several geometric algorithms dependent of solid modeling method and robot kinematics information. The user interface that is used in environment modeler must be an efective interface between user, the planner, the robot model, 75and the total world model. The system that is developed, manages this «job by using a graphical kernel system package (GDDM). There is a continuous communication between environment modeler and the other planning modules. This communication is realized by message passing mechanism. To do this, message passing is standardized by modeling these modules as objects. These three modules are integrated as a robot arm planning system and tested on several sample inputs. Results are obtained consiquently and applied on the RHINO XR-3 series robot-arm. 76
Benzer Tezler
- Robot kolu uygulamaları için bir hareket planlayıcı
Başlık çevirisi yok
N.CEM HAYALİOĞLU
Yüksek Lisans
Türkçe
1992
Elektrik ve Elektronik MühendisliğiEge ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERDAR KORUKOĞLU
- Robot kolu uygulamaları için bir iş planlayıcı
Başlık çevirisi yok
H.CANDAN ÇANKAYA
Yüksek Lisans
Türkçe
1992
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolEge ÜniversitesiDOÇ.DR. SERDAR KORUKOĞLU
- Yapay sinir ağları ile robotlarda hareket kontrolü
Motion control of robots with artificial neural networks
HAKAN ARSLAN
Doktora
Türkçe
1999
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiPROF.DR. AHMET KUZUCU
- Direct adaptive control of robot manipulators
Robot kolların doğrudan uyarlamalı denetimi
AHMET CEZAYİRLİ
Yüksek Lisans
İngilizce
1999
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolBoğaziçi ÜniversitesiSistem ve Kontrol Mühendisliği Ana Bilim Dalı
PROF. DR. OSMAN TÜRKAY