MoO3 ve Sb2O3 katkılandırılmış borotellürit camların yapısal ve optik özelliklerinin incelemesi
Investigation of structural and optical properties of borotellurite glasses dopted with MoO3 AND Sb2O3
- Tez No: 973361
- Danışmanlar: DR. ÖĞR. ÜYESİ MELEK FİDAN
- Tez Türü: Yüksek Lisans
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Atatürk Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Ana Bilim Dalı
- Bilim Dalı: Yüksek Enerji ve Plazma Fiziği Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Amaç: Bu çalışmada, B₂O₃-TeO₂-Li₂O-CuO camları üzerine farklı oranlarda MoO₃ katkısının ve B₂O₃–TeO₂–Li₂O–CuO camlarına da farklı oranlarda eklenen Sb₂O₃ katkısının camın yapısal, fiziksel, optik ve elektriksel özelliklerine etkileri incelenmektir. Yöntem: Borotellürit camsısı çeşitli oranlarda MoO3 ile ve Sb2O3 katkılandırılarak hazırlanan camların yapısal ve fiziksel özellikleri XRD, FTIR, UV- Vis ve EPR spektroskopik teknikleri kullanılarak incelenmiştir. Bulgular: XRD spektrometresi kullanılarak camların amorf yapıda olup olmadığı, FTIR spektrometresi kullanılarak cam numunelerin kimyasal yapısının ve bu yapıdaki bağların tanımlanması, UV-NIR spektrometresi kullanılarak sentezlenen örneklere ait soğurma ve geçirgenlik spektrumları, soğurma katsayısı, optik bant boşluğunun enerji ve Urbach enerjisi hesaplanıp, EPR cihazından alınan ölçümlerle g spektroskopik yarılma faktörleri, aşırı ince yapı sabitleri, çizgi genişlikleri, çizgi şiddetleri ve moleküler yörünge parametrelerinin hesaplanması amaçlanmıştır. Sonuç: XRD analizleriyle camların amorfsal yapısı doğrulanmıştır. FTIR spektroskopisiyle, cam yapısının temel birimlerinin BO₃ ve BO₄ olduğu ortaya konmuştur. Sb₂O₃ ve MoO3 katkısının, cam ağ yapısında ağ değiştirici (network modifier) rolü üstlenerek daha fazla bağlanmamış oksijen (NBO) oluşumuna yol açtığı gösterilmiştir. UV-Vis analizleriyle, katkıların miktarlarındaki artışın bant aralığını (Ed) düşürdüğü ve cam yapısındaki düzensizliği artırdığı ortaya konmuştur. EPR spektroskopisi ile Cu²⁺ iyonlarının yerel simetrisinin tetragonal bozulmuş oktahedral yapı olduğu belirlenmiştir.
Özet (Çeviri)
Purpose: In this study, the effects of MoO3 doping at different rates on B2O3-TeO2-Li2O-CuO glasses and Sb2O3 doping at different rates on B2O3–TeO2–Li2O–CuO glasses on the structural, physical, optical and electrical properties of the glass were investigated. Method: The structural and physical properties of glasses prepared by adding various amounts of MoO3 and Sb2O3 to borotellurite glass were investigated using XRD, FTIR, UV-Vis and EPR spectroscopic techniques. Findings: It was aimed to determine whether the glasses were amorphous by using XRD spectrometry, to define the chemical structure of the glass samples and the bonds in this structure by using FTIR spectrometry, to calculate the absorption and transmittance spectra, absorption coefficient, optical band gap energy and Urbach energy of the synthesized samples by using UV-NIR spectrometry, and to calculate the g spectroscopic splitting factors, hyperfine structure constants, line widths, line intensities and molecular orbital parameters by using the measurements taken from the EPR device. Results: XRD analyses confirmed the amorphous structure of the glasses. FTIR spectroscopy revealed that the fundamental units of the glass structure are BO3 and BO4. It was shown that Sb2O3 and MoO3 additives act as network modifiers in the glass network, leading to increased formation of unbound oxygen (NBO). UV-Vis analyses revealed that increasing the additive amounts reduces the band gap (Ed) and increases the disorder in the glass structure. EPR spectroscopy determined that the local symmetry of the Cu⁺ ions is tetragonal with octahedral distortion.
Benzer Tezler
- Geçiş metal oksit içeren tellürit ve antimonat camların elektriksel ve yapısal özelliklerinin incelenmesi
Investigation of electrical and structural properties in transition metal oxide containing tellurite and antimonite glasses
ONAT BAŞAK
Yüksek Lisans
Türkçe
2019
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALİ ERÇİN ERSUNDU
- Synthesis and investigation of transition metal oxide-doped heavy metal oxide glasses for their evaluation as large band gap semiconductors
Geçiş metal oksit katkılı ağır metal oksit camların geniş bant araliğina sahip yari iletkenler olarak değerlendirmesi amacıyla sentezi ve incelenmesi
NUŞİK GEDİKOĞLU
Yüksek Lisans
İngilizce
2017
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MİRAY ÇELİKBİLEK ERSUNDU
- The preparation and characterization of samples of glass electrolyte for lithium/sodium-ion batteries
Lityum/sodyum-iyon bataryalar için cam elektrolit örneklerinin hazırlanması ve karakterizasyonu
MURAT ÖZKAN
Yüksek Lisans
İngilizce
2018
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET TUNCER ERCİYES
- Kendiliğinden ilerleyen yüksek sıcaklık sentezi ile tufalden demir esaslı kompozit (Mo2FeB2-Fe) üretimi
Production of iron based composite (Mo2FeB2-Fe) from scale by self propagating high temperature synthesis
BUSE YILMAZ
Yüksek Lisans
Türkçe
2019
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. CEVAT BORA DERİN
- PVD tekniğiyle büyütülen MoO3 yarıiletken ince filmlerin elektriksel ve optik özelliklerinin incelenmesi
MoO3 thin films growth with physical vapour deposition technique and investigation of electrical and optical properties
CANAN YÖNEY
Yüksek Lisans
Türkçe
2019
Fizik ve Fizik MühendisliğiTekirdağ Namık Kemal ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. BEYHAN TATAR