Geri Dön

Machine learning modelling of stall on airfoils

Başlık çevirisi mevcut değil.

PDF İndir

  1. Tez No: 841465
  2. Yazar: BERAT KAAN FIRAT
  3. Danışmanlar: Belirtilmemiş.
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: İngilizce
  9. Üniversite: Imperıal College London
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Research and developments have been growing for wind power industry in the form of onshore and offshore wind turbines as they provide cost-effective, clean, and sustainable energy. The increase in the need of clean and sustainable energy source and competition in renewable energy has created a need of a more efficient design for wind turbines that is capable of withstanding high loads while avoiding stability problems of the blades like stall. CFD analysis require many simulations and are mostly time consuming when the design space of possible airfoil geometries is considered. On the other hand, the recent growth of data driven methods and applications has led to advances in many scientific fields. Therefore, machine learning applications can be used together with a data set from a highfidelity data from CFD to build a surrogate model. However, more conventional methods require large data set to make the machine learning model learn the pattern and usually struggles to foresee the results for the unseen data. This project aims to combine the methods on CFD simulations with machine learning applications to create a predictive model that determines the stall of an airfoil by using novel machine learning techniques. In this technique, physically lower-fidelity solutions are being injected into the machine learning model to make the most efficient output from the model predictions with a given amount of data. To provide the data set of different airfoil geometries covering corresponding stall angles, a CFD solver has been utilised. Artificial neural networks were trained, and physics guidance is provided by a vortex panel method. It has been shown that when the neural networks are constrained by physics input, data is used more efficiently, and predictions are more accurate to the physical situations in addition to the fact that the models identify the pattern using data, making the concept of finding the stall quicker which would otherwise take quite long times when solely CFD simulations were performed. Therefore, it is more reliable to depend on the predictions from physics guided neural networks which provided stall predictions up to 5% error whereas pure neural networks model provides 15% error when both models have the same structure.

Özet (Çeviri)

Özet çevirisi mevcut değil.

Benzer Tezler

  1. Tez No

    759550

    Solving Navier Stokes equations with physics informed neural network for calculation of aerodynamic forces

    Aerodinamik kuvvetleri hesaplamak için Navier-Stokes denklemlerinin fizik bilgili nöral ağ ile çözümü

    SILA AKPINAR

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Mekatronik MühendisliğiSabancı Üniversitesi

    Mekatronik Mühendisliği Ana Bilim Dalı

    PROF. DR. SERHAT YEŞİLYURT

  2. Tez No

    1001616

    Integrated CFD-based reduced-order modeling for ice accretion and aerodynamic performance predictions

    Bütünleşik CFD tabanli indirgenmiş dereceli model ile buz birikimi ve aerodinamik performans tahmini

    ÖMER AKBAL

    Doktora

    İngilizce

    İngilizce

    2026

    Uçak Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    PROF. DR. METİN ORHAN KAYA

  3. Tez No

    1013993

    Multi-Task U-Net Surrogate for Aerodynamic and Aeroacoustic Source Field Prediction of Airfoils

    Kanat Profillerinin Aerodinamik ve Aeroakustik Kaynak Alanı Tahmini için Çoklu Görev U-Net Vekil Modeli

    YUSUF AKTAŞ

    Yüksek Lisans

    İngilizce

    İngilizce

    2026

    Uçak Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı (disiplinlerarası)

    DOÇ. DR. BAHA ZAFER

  4. Tez No

    353

    Kam yapma aparatı

    Cam milling attachment

    ORHAN UZUN

    Yüksek Lisans

    Türkçe

    Türkçe

    1986

    Makine MühendisliğiGazi Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. FEVZİ ERCAN

  5. Tez No

    159

    Örnekle-tut ve analogtan dijitale çevirme devrelerinin analiz ve sentezi

    Başlık çevirisi yok

    ERTUĞRUL İPEK

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    Elektrik ve Elektronik MühendisliğiUludağ Üniversitesi

    Elektronik Ana Bilim Dalı

    PROF. DR. ERGÜR TÜTÜNCÜOĞLU

Geri Dön