Conjugate heat transfer analysis of a small turbojet enginecombustion chamber by using computational fluid dynamics
Başlık çevirisi mevcut değil.
- Tez No: 798143
- Danışmanlar: DR. TOM VERSTRAETE
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Conjugate Heat Transfer (CHT), Combustion Chamber, Multiphase Flow, Lagrangian Approach, Boundary Layer Thickness
- Yıl: 2016
- Dil: İngilizce
- Üniversite: Queen Mary Unıversıty Of London
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Turbojet engines have been in use since 1937. Each material used in this technology is very crucial and expensive. One of the most important component of turbojet engines is combustion chamber. Developments in this technology – high compression ratios- caused high temperature levels inside of combustion chamber and liner wall as well. To determine and to evaluate its temperaturedependent properties of the liner wall temperature is very crucial. In this work, a number of simulations have been done to see the parameters affecting liner wall temperature. The results were compared to experimental values obtained from tests. Firstly, the importance of gas properties as temperature-dependent was seen. Then, the fuel was used in gas and liquid phase, the liquid phase was decided to be used because evaporation energy and liquid flow affected flow and the magnitudes of temperature and velocity. Moreover, different combustion models by applying test case conditions were used and compared to experimental values. As a result, Presumed Probability Density Function combustion model was decided to be used in further works. Furthermore, different boundary layer conditions were used and compared to experimental values. As a result, the best compatible case with the test case was simulated in take-off conditions. The results obtained from this simulation was evaluated.
Benzer Tezler
- Radyasyon ısı transferinin bir gaz türbini yanma odası duvar sıcaklığı üstündeki etkisinin hesaplamalı akışkanlar dinamiği-eşlenik ısı transferi yöntemleriyle incelenmesi
Estimation of the effect of radiation heat transfer in a gas turbine combustor wall temperature with computational fluid dynamics – conjugate heat transfer methodology
YÜCEL SAYĞIN
Yüksek Lisans
Türkçe
2017
Makine MühendisliğiTobb Ekonomi ve Teknoloji ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. SITKI USLU
- High temperature driven optimization of a hybrid rocket graphite nozzle design
Hibrit roket nozul tasarımının yüksek sıcaklık dayalı optimizasyonu
ŞULE ÖZTÜRK
Yüksek Lisans
İngilizce
2024
Havacılık ve Uzay Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. İBRAHİM ÖZKOL
- Basınçlı hava kurutucusu ısı geri kazanım ünitesi ısı değiştiricisi tasarımı ve had kullanarak sayısal analizi
Pressuri̇zed ai̇r dryer heat recovery uni̇t heat exchanger desi̇gn and cfd analysi̇s
AYŞE BURCU YILDIZ
Yüksek Lisans
Türkçe
2013
Mühendislik BilimleriUludağ ÜniversitesiMakine Mühendisliği Bölümü
PROF. DR. MUHSİN KILIÇ
- Doğrusal kesitli olmayan pertürbatörlerle periyodik aralıklarla kaplanmış bir türbin iç soğutma kanalındaki akışın RSM ile sayısal analizi
Numerical RSM analysis of flow in turbine internal cooling channel roughened at periodic intervals with nonlinear cross section perturbator
GÖKMEN KIDIK
Yüksek Lisans
Türkçe
2018
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MURAT ÇAKAN
- Numerical simulation of charring ablation coupled with computational fluid dynamics
Kömürleşerek aşınan yalıtım malzemelerinin hesaplamalı akışkanlar dinamiği ile eşzamanlı nümerik analizi
ÇETİN OZAN ALANYALIOĞLU
Yüksek Lisans
İngilizce
2019
Makine MühendisliğiOrta Doğu Teknik ÜniversitesiHavacılık ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. YUSUF ÖZYÖRÜK