Kağıt yüzeyinin kaplanmasında nişasta kullanımı
Usability of strach in coating
- Tez No: 77990
- Danışmanlar: PROF. DR. EROL GÖKSEL
- Tez Türü: Doktora
- Konular: Ormancılık ve Orman Mühendisliği, Forestry and Forest Engineering
- Anahtar Kelimeler: Kağıt, Nişasta, Yüzey kaplama malzemeleri, Paper, Starch, Surface coating materials
- Yıl: 1998
- Dil: Türkçe
- Üniversite: İstanbul Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Orman Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
SUMMARY Usability of Starch in Coating." The purpose of this study was to select the papers that have the highest degree of physical and optical properties and printability. Because of two different base paper were coated on the Dixon-pilot coater. Properties of base paper A and B and their mixture are listed in table 13 and 14. Three different starch of AVABE were used in the coating mixture Other chemicals were chosen from SEKA - Dalaman coating unit. 13% of total binder (styrene - butadien latex and oxidised potato starch) in the coating mixture, were used The coating mixture was prepared in a Kady Mill for 10 minutes and adjusted to 60% solid (dry content) and pH 7.5-8. The viscosity measured in a Brookfield viscosimeter at 100 r. p.m.. Dixon-Pilot coater was used for coating. The coated papers were calendered by passing through the nips of a super calender. The properties of the coated papers were evaluated by ordinary laboratory methods at the laboratory of SEKA -Dalaman mill. The papers were conditioned to 50% RH and 23 °C prior to the measurements. Table 24-25 shows the results of properties. And also, statistical calculations were applied on the results (F and T Tests) Perfectamyl A 4692, that used at the range of 7-9 % together with latex, were found the best for all properties. 104Araştırmada elde edilen fiziksel ve optik özelliklere ait ortalama değerler, her bir etki faktörüne göre tablo.24 ve 25 de verilmektedir. Denenen nişastalar sonucunda A4692 tipi nişastanın %7-9 oranında, B baz kağıdında kullanılmasının iyi sonuç verdiği saptanmıştır. Sonuçta, araştırmada kuşelemedeki etki faktörleri olarak incelenen baz kağıt türü, nişasta türü ve nişasta oranının kuşe kağıt özelliklerine olan karşılıklı etkilerinin genellikle önemli oldukları tespit edilmiştir. 103
Özet (Çeviri)
SUMMARY Usability of Starch in Coating." The purpose of this study was to select the papers that have the highest degree of physical and optical properties and printability. Because of two different base paper were coated on the Dixon-pilot coater. Properties of base paper A and B and their mixture are listed in table 13 and 14. Three different starch of AVABE were used in the coating mixture Other chemicals were chosen from SEKA - Dalaman coating unit. 13% of total binder (styrene - butadien latex and oxidised potato starch) in the coating mixture, were used The coating mixture was prepared in a Kady Mill for 10 minutes and adjusted to 60% solid (dry content) and pH 7.5-8. The viscosity measured in a Brookfield viscosimeter at 100 r. p.m.. Dixon-Pilot coater was used for coating. The coated papers were calendered by passing through the nips of a super calender. The properties of the coated papers were evaluated by ordinary laboratory methods at the laboratory of SEKA -Dalaman mill. The papers were conditioned to 50% RH and 23 °C prior to the measurements. Table 24-25 shows the results of properties. And also, statistical calculations were applied on the results (F and T Tests) Perfectamyl A 4692, that used at the range of 7-9 % together with latex, were found the best for all properties. 104
Benzer Tezler
- Kağıt yüzeyinin suda çözünen bileşiklerle kaplanmasında bazı pigmentlerin fonksiyonları
The Functions of some pigments used in the composition of the water soluble paper coating
ÖZNUR ÖZDEN
Yüksek Lisans
Türkçe
1992
Ormancılık ve Orman Mühendisliğiİstanbul ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
PROF.DR. TURAN TANIK
- Kağıt-mürekkep arayüzeyinin baskı kalitesine etkisini belirleyen faktörlerin incelenmesi
Başlık çevirisi yok
MEHMET OKTAV
- Çukur baskı ve uygulama teknikleri
Hollow print and performing technics
ESİN KOCATÜRK KAVGA
Yüksek Lisans
Türkçe
1998
Güzel SanatlarAnadolu ÜniversitesiResim-İş Eğitimi Ana Sanat Dalı
YRD. DOÇ. DR. MUSTAFA TOPRAK
- An Experimental study on cooling by an impinging air jet
Çarpan hava jeti yardımıyla düz bir yüzeyin soğutulmasının deneysel olarak incelenmesi
MURAT KIZILIRMAK
- Ahşap pres kapılarda yangın geçirgenliğine ilişkin araştırmalar
Research on-fire resistency of wooden flush doors
OSMAN NURİ ÖZ
Yüksek Lisans
Türkçe
2001
Ağaç İşleriHacettepe ÜniversitesiAğaç İşleri Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. SALİH ASLAN
