The structural and morphological characterization of electrodeposited cobalt tungsten alloys
Başlık çevirisi mevcut değil.
- Tez No: 760132
- Danışmanlar: Belirtilmemiş.
- Tez Türü: Doktora
- Konular: Mühendislik Bilimleri, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: İngilizce
- Üniversite: Unıversıty Of Leıcester
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Traditional hexavalent hard chrome coatings produced from chromium trioxide are providing reasonable corrosion and wear resistance, which recognised as a carcinogen and its use controlled by reach legislation. Many researchers have investigated as the ability of Mo and W to codeposit with iron group metals (Ni, Fe, Co) to form crystalline and amorphous compounds and more recently, work has shown that nano-crystalline coatings may be produced with high hardness. In this thesis, Co-W electrodeposited coatings are investigated structurally, compositionally, and morphologically. Series of Co-W alloy coatings with variable structures and composition were obtained using a gluconate bath and a soluble Co anode at 80 °C temperature and 2.7 Adm-2 current density with air agitation. Some of these samples at the same compositions illustrate at different preferred growth directions of (100), (101), (002) and (110) and these differences occur due to variations in agitation. SEM/EDX and XRD and microhardness were employed to characterise the coatings and how they differ across the samples due to edge effects. Variation in W content of 2 – 3 at.% changes in W content of the coatings affect the hardness significantly up to around 50%. Coatings were selected for heat treatment process based on composition and preferred orientation. The effect on the structure and hardness of the coatings after heat treatment at 600 °C for the duration up to 160 hours was explored using XRD and SEM. Two of 20 at.% W electrodeposited coatings at (100) and (101) preferred growth direction examined on TEM as electrodeposited and after 2 hours heat treatment by sample preparations of ion beam vertically and horizontally to the coating in the cross section using nanotechnological developments. The wear behaviour some of these samples examined under dry sliding conditions.
Benzer Tezler
- Devrelerin büyük işaret cevaplarının bilgisayar yardımıyla bulunması
Başlık çevirisi yok
NÜKHET GÜNEYİ
Yüksek Lisans
Türkçe
1985
Elektrik ve Elektronik MühendisliğiUludağ ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. ERGÜR TÜTÜNCÜOĞLU
- Ulaş Sağlık Ocağı merkezinde nüfusun bazı niteliklerine ve konutların durumuna ilişkin bir çalışma
An Investigation carried out at the Ulaş Public Health Centre concerning some characteristics of the population and housing conditions in the district of Ulaş
EROL ŞANLI
Doktora
Türkçe
1985
Halk SağlığıCumhuriyet ÜniversitesiHalk Sağlığı Ana Bilim Dalı
DOÇ. DR. SERVET ÖZGÜR
- Çimentonun sertleşmesi üzerinde kimyasal komponentlerin etkisi
Başlık çevirisi yok
NACİYE TÜRKEL
Yüksek Lisans
Türkçe
1986
Kimya MühendisliğiUludağ ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. MUSTAFA CEBE
- 1981 Türkiye tarımsal yapısının önemli bileşenleri ve tarımsal bölgelerin elde edilmesi
Principle components of Turkey's agricultural structure and to determine agricultural rigions in 1981
İHSAN KARABULUT
- Buğdayda farklı melezleme teknikleri kullanarak tohum tutma oranının saptanılması
Başlık çevirisi yok
İSMAİL TÜZÜN
Yüksek Lisans
Türkçe
1986
ZiraatUludağ ÜniversitesiTarla Bitkileri Ana Bilim Dalı
PROF. DR. HALİS RUHİ EKİNGEN