Geri Dön

ZnO üzerine farklı oranlarda CuO ve/veya CoO katkılandırılmış nanokompozitlerin morfolojik, yapısal, optiksel ve dielektrik özelliklerinin incelenmesi

Investigation of morphological, structural, optical and dielectric properties of CuO and/or CoO doped nanochomposites at different ratio on ZnO

  1. Tez No: 513538
  2. Yazar: SİNEM KAYAR
  3. Danışmanlar: PROF. DR. ABDULKADİR ÖZER
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya Mühendisliği, Chemical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2018
  8. Dil: Türkçe
  9. Üniversite: Atatürk Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Proses ve Reaktör Tasarımı Bilim Dalı
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu tezde, birlikte çöktürme yöntemiyle Zn1-xCuxO (0 ≤ x ≤ 0.10), Zn1-xCoxO (0 ≤ x ≤ 0.10), Zn0.95-xCu0.05CoxO (0 ≤ x ≤ 0.05) ve Zn0.95-xCo0.05CuxO (0 ≤ x ≤ 0.05) metal oksit nanokompozitler sentezlendi. Metal oksit nanokompozitlerin yapısal, morfolojik, kompozisyon ve optik özellikleri XRD, SEM, EDS, XPS, Raman spektroskopisi ve UV-Vis absorpsiyon spektroskopisi gibi ölçüm metodları kullanılarak yapıldı. ZnO içerisine farklı oranlarda CuO ve/veya CoO katkılandırılmış nanokompozitlere ait XRD desenlerindeki tüm kırınımların ZnO'in standart altıgen (hegzagonal) wurtzit yapısı ile uyumlu olduğu görülmektedir. XRD desenlerinden hesaplanan metal oksit nanokompozitlerin ortalama partikül boyutlarının 22,0–34,5 nm aralığında olduğu bulunmuştur. SEM görüntüleri, homojen ve üniform olarak dağılmış parçacıkların genellikle küresel olduğunu göstermektedir. Fakat SEM sonuçlarından %10 Co katkılandırmalı ZnO nanopartiküllerin morfolojisini küreselden yaprak benzeri şekle değiştirdiği gözlenmiştir. EDS spektrumları beklenen stokiyometri ile örneklerde Cu ve/veya Co varlığını teyit etmektedir. Raman spektroskopisi sonuçları, Cu ve Co katkısının ZnO'in wurtzit yapısını değiştirmediğini doğrulamaktadır. UV-Görünür spektrumları iyi eksitonik absorpsiyon piklerini göstermektedir. Bant boşluğu enerjilerinin 3,15-3,57 eV arasında olduğu bulunmuştur. Deneysel sonuçlar CuO ve CoO katkılandırılmış örneklerde frekansın artışı ile kapasitans ve dielektrik sabitlerinin azaldığını göstermektedir.

Özet (Çeviri)

In this thesis, Zn1-xCuxO (0 ≤ x ≤ 0.10), Zn1-xCoxO (0 ≤ x ≤ 0.10), Zn0.95-xCu0.05CoxO (0 ≤ x ≤ 0.05) and Zn0.95-xCo0 05CuxO (0 ≤ x ≤ 0.05) metal oxide nanocomposites are synthesized by co-precipitation method. The structural, morphological, compositional and optical properties of metal oxide nanocomposites were done using the measurement methods such as XRD, SEM, EDAX, XPS, Raman spectroscopy and UV–Vis absorption spectroscopy. It is seen that all diffractions in XRD patterns of CuO and/or CoO-doped nanocomposites at different ratios to ZnO are compatible with the standard hexagonal wurtzite structure of ZnO. The average particle size of the metal oxide nanocomposites calculated from the XRD patterns were found to be in the range of 22.0–34.5 nm. SEM images shows that homogeneous and uniformly dispersed particles are generally spherical. However, from the SEM results, it was observed that 10% Co doping changed the morphology of ZnO nanoparticles from spherical to leaf-like shape. EDAX spectra confirms the presence of Cu and/or Co in the samples with expected stoichiometry. Raman spectroscopy results confirm that Cu and Co dopant has not altered the wurtzite structure of ZnO. UV–Visible spectra show well excitonic absorption peaks. The band gap energies are found to values between 3.15–3.57 eV. The experimental results indicate that capacitance and dielectric constants decreases with increase in frequency at the CuO and CoO doped samples.

Benzer Tezler

  1. Bakır/gümüş/çinko oksit (CuAg/ZnO) partiküllerinin ultrasonik sprey piroliz yöntemiyle üretimi

    Production of CuAg/ZnO nanocomposite particles by ultrasonic sprey pyrolysis

    TOLGA ÇAKMAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. SEBAHATTİN GÜRMEN

  2. Nanocomposite scaffolds containing metal nanoparticles

    Metal nanotanecik içeren nanokompozit yapı iskeleleri

    AYŞEN AKTÜRK

    Doktora

    İngilizce

    İngilizce

    2020

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. GÜLTEKİN GÖLLER

    PROF. DR. MELEK MÜMİNE EROL TAYGUN

  3. Numerical analysis of nano-fluid flow and heat transfer in ducts

    Kanallarda nano akışkan akışının ve ısı transferinin sayısal olarak incelenmesi

    HUSSEIN RAAD ABDULHADI AL-TAMEEMI

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Makine MühendisliğiÇankaya Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. HAŞMET TÜRKOĞLU

  4. Montmorillonitin farklı katyonlarla modifiye edilmesi ve nanoorganokil sentezi ile antibakteriyel özelliklerinin incelenmesi

    Modification of montmorillonite with different cations and investigation of its antibacterial properties by nanoorganochil synthesis

    SÜMEYRA ZAHİDE ÖZTÜRK

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Metalurji MühendisliğiSakarya Uygulamalı Bilimler Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. FATİH ÇALIŞKAN

    DR. ÖĞR. ÜYESİ MURAT TUNA

  5. Farklı oranlarda bi katkılı ZnO ara yüzey tabakalı Al/(Bi:ZnO)/p-Si (MIS) fotodiyotların optik ve elektrik parametrelerinin incelenmesi

    Optical and electrical parameters of Al/(Bi:ZnO)/p-Si (MIS) photodiodeodes with different ratios of bi doped zno interfacial layer

    AHMET DEMİRCİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Bilim ve TeknolojiGazi Üniversitesi

    Fotonik Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. ŞEMSETTİN ALTINDAL

    DOÇ. DR. HAYRİYE GÖKÇEN ÇETİNKAYA