Çok yüksek molekül ağırlıklı polietilen fiberle (UHMWPE) kuvvetlendirilmiş polimetilmelaksilatin bazı mekanik özelliklerinin kıyaslanması
Compering some of the mechanical propertiles of polymethylmethacrylate reinforced with ultra high molecular weight polyethylene fibers
- Tez No: 49124
- Danışmanlar: PROF.DR. ARİFE DOĞAN
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Akrilik reçineler, Metilmetakrilatlar, Takma dişler, Acrylic resins, Methylmethacrylates, Dentures
- Yıl: 1996
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
-63- SUMMARY In this study, the impact strength and the tensile stress of the polymethylmetacrylate strengthened with Ultra High Molecular Weight Polyethylene Fibers (UHMWPE) was compared. For this purpose, polymethylmetacrylate polimerized with heat and Ultra High Molecular Weight Polyethylene Fibers (UHMWPE) were widely used. Impact strength test was done by using Hounsfield tensometer, tensile stress test was done by Instron Tensile Tensile Machine adjusted for 5mm/min.. There after datas for impact srength and tensile stress were statistically evaluated. 1mm. slices of arised broken surfaces were examined under SEM by covering them with gold and magnifications between x100 and x2000 were photographed. In the examinations done with SEM there was no adhesion found between polyethylene fiber-acryl matrix. Statistically significant differences were found when the impact strength datas were compared with control group and the increase in the fiber ratios increased the impact strength. However there was a decrease for the values of tensile strength.-62- Çarpma dayanıklılık verileri kontrol grubu ile kıyaslandığında istatistiksel açıdan anlamlı farklılıklar bulunmuş ve fiber oranındaki artışın çarpmaya karşı olan dayanıklılığı arttırdığı tespit edilmiştir. Bunun yanında ise çekme gerilim dayanıklılığı verilerinde bir azalma olduğu görülmüştür.
Özet (Çeviri)
-63- SUMMARY In this study, the impact strength and the tensile stress of the polymethylmetacrylate strengthened with Ultra High Molecular Weight Polyethylene Fibers (UHMWPE) was compared. For this purpose, polymethylmetacrylate polimerized with heat and Ultra High Molecular Weight Polyethylene Fibers (UHMWPE) were widely used. Impact strength test was done by using Hounsfield tensometer, tensile stress test was done by Instron Tensile Tensile Machine adjusted for 5mm/min.. There after datas for impact srength and tensile stress were statistically evaluated. 1mm. slices of arised broken surfaces were examined under SEM by covering them with gold and magnifications between x100 and x2000 were photographed. In the examinations done with SEM there was no adhesion found between polyethylene fiber-acryl matrix. Statistically significant differences were found when the impact strength datas were compared with control group and the increase in the fiber ratios increased the impact strength. However there was a decrease for the values of tensile strength.
Benzer Tezler
- Preparation and characterization of ultra high molecular weight polyethylene and polyisoprene solvent cast blend films
Çok yüksek molekül ağırlıklı polietilen ve poliizopren çözelti karışımlarından elde edilen filmlerin özellikleri
ALİ ERKAN AKINAY
- Preparation of ultra high molecular weight polyethylene foam and conducting composite with polypyrrole
Çok yüksek molekül ağırlıklı polietilen köpük ve polipirol ile iletken kompozit hazırlanması
BAHATTİN AYDINLI
Yüksek Lisans
İngilizce
1994
KimyaOrta Doğu Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. TEOMAN TİNÇER
- Preparation and characterization of hydrophobic and hydrophilic polymeric fodms from ultra high molecular weight polythylene
Çok yüksek molekül ağırlıklı polietilenden suyu seven ve sevmeyen köpük hazırlanması ve karakterizasyonu
BAHATTİN AYDINLI
- The Mechanical and melt properties of ultra high molecular weight polyethylene and high density polyethylene blends
Başlık çevirisi yok
MUSTAFA COŞKUN
- Çeşitli katkılı ve katkısız polimer yatakların sürtünme ve aşınma karakteristiklerinin deneysel tayini
Başlık çevirisi yok
VEDAT TEMİZ
Doktora
Türkçe
1998
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA GEDİKTAŞ