Farklı yüzey işlemleri uygulanan monolitik seramik sistemlerde eskitme sonrası translusensi ve renk değişimlerinin değerlendirilmesi
Evaluation of the effects of different surface treatments on the translucency and color stability of monolithic ceramic systems after accelerated aging
- Tez No: 474802
- Danışmanlar: PROF. DR. BİLGE TURHAN BAL
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Dental cilalama, Dental materyaller, Dental porselen, Diş renk değişikliği, Metal seramik alaşımları, Spektrofotometri, Zirkonyum, Dental polishing, Dental materials, Dental porcelain, Tooth discoloration, Metal ceramic alloys, Spectrophotometry, Zirconium
- Yıl: 2017
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmanın amacı; farklı yüzey işlemleri uygulanmış monolitik seramik sistemlerde eskitme sonrası renk ve translusensi değişimlerini değerlendirmektir. Monolitik zirkonya (Zirkonzahn Prettau) ve lityum disilikat seramik (IPS e.max Press LT) materyallerinden disk şeklinde örnekler hazırlanmıştır. Örnekler yüzey işlemine göre üç alt gruba ayrılmıştır (n=9, G grubu: glaze, L grubu: polisaj kiti ve P grubu: polisaj kitini takiben polisaj patı). Renk ölçümleri, UV eskitme işlemi öncesi ve sonrasında spektrofotometre cihazı (Vita Easyshade Advance 4.0, Vita Zahnfabrik, Bad Säckingen, Almanya) ile gerçekleştirilmiştir. L*, a*, b*, parametreleri kaydedilerek ΔE ve TP (Translusensi Parametresi) değerleri hesaplanmıştır. Veriler; Mann Whitney U, Kruskal Wallis ve post-hoc testler ile analiz edilmiştir (p<0,05). Tüm analizlere Bonferroni Düzeltmesi uygulanmıştır. Hızlandırılmış yapay eskitme sonrası Zirkonzahn Prettau örneklerin renk değişim değerleri klinik olarak kabul edilebilir seviyenin üzerine çıkmıştır (∆E=5,03). Ancak eskitme sonrası IPS e.max Press örneklerde klinik olarak algılanabilir seviyenin çok daha altında renk değişimi gözlenmiştir (∆E=0,41). Zirkonzahn Prettau materyalinde polisaj patı uygulanan örneklerde eskitme sonrası renk değişimi; diğer yüzey işlemlerinin uygulandığı örneklerde gerçekleşen renk değişimine kıyasla daha yüksek bulunmuştur (∆E P >L, G). IPS e.max Press materyalinde gerçekleşen renk değişimi ise uygulanan yüzey işlemlerinden etkilenmemiştir. IPS e.max Press materyali; Zirkonzahn Prettau materyalinden çok daha translusent bulunmuştur. İki materyal grubunda da uygulanan yüzey işlemleri arasında TP değerleri açısından istatistik olarak anlamlı farklılık görülmemiştir. Eskitme sonrası translusensi değerleri iki materyal grubunda düşmüştür ancak bu düşüş klinik olarak algılanabilir seviyenin çok altındadır. Yüksek estetik gereksinimin mevcut olduğu ön bölge restorasyonlarında monolitik zirkonya yerine, lityum disilikat seramik materyalinin daha iyi bir tercih olacağı düşünülmektedir.
Özet (Çeviri)
The aim of this study was to evaluate the influence of surface treatments and aging procedures on the translucency and color stability of monolithic ceramic systems. Disc-shaped specimens for each material; monolithic zirconia (Zirkonzahn Prettau) and lithium disilicate monolithic glass-ceramic (IPS e.max Press LT) were prepared according to the manufacturer's instructions. The specimens were divided into three groups according to the surface treatments (n=9, Group G:Glazing, Group L: Rubber polishing system and Group P: Rubber polishing system followed by polishing paste.) Color measurements were performed before and after UV aging process, using a spectrophotometer device (Vita Easyshade Advance 4.0, Vita Zahnfabrik, Bad Säckingen,Germany). L*, a*, b*, parameters were recorded and ΔE and TP (Translucency Parameter) values were calculated. Data were statistically analysed using Mann Whitney U, Kruskal-Wallis and post-hoc tests (p<0,05). The Bonferroni correction was applied for all analyses. After accelarated artificial aging the color changes in the Zirkonzahn Prettau samples (ΔE = 5,03) were exceeded the clinically acceptable level. However IPS e.max Press samples showed a slight color change (∆E=0,41) that was not clinically perceptible. Rubber polishing system followed by polishing paste resulted in a higher ∆E value compared with the others for the Zirkonzahn Prettau material (∆E P >L, G). Color change value was not affected by the surface treatment for the IPS e.max Press after aging. IPS e.max Press showed significantly greater translucency than Zirkonzahn Prettau material. There were no significant differences in TP values between the surface treatments applied to the two groups of materials. TP values of both material groups decreased after aging but these changes were not clinically perceptible. Lithium disilicate glass ceramic considered to be a better choice than monolithic zirconia for the restorations in the anterior region which highly esthetic requirements are demanded.
Benzer Tezler
- Farklı yüzey bitirme işlemlerinin seramik malzemelerinde bakteri adezyonuna etkisinin ın-vitro incelenmesi
The in – vitro investigation of the effect of different surface finishing techniques on bacterial adhesion to ceramic materials
İLKER ÖNDER
Doktora
Türkçe
2015
Diş HekimliğiEge ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. MUSTAFA GÖKHAN AKSOY
- Farklı yüzey işlemi uygulanmış zirkonyum oksit esaslı alt yapıların üst yapı porselenine olan bağlanma dayanımının değerlendirilmesi
Evaluation of bond strength between veneering porcelains and different surface treated zirconium oxide based frameworks
NEVRİYE AKSU
Doktora
Türkçe
2015
Diş HekimliğiKaradeniz Teknik ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. LÜTFÜ İHSAN ALADAĞ
- Monolitik zirkonya seramik sistemlerinin optik özellikleri üzerine yaşlandırmanın etkisinin değerlendirilmesi
Evaluation of aging on optical properties of monolithic zirconia ceramic systems
AZİZ SÖNMEZ
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. ARZU ZEYNEP YILDIRIM
- Zirkonyum hafnium nitrür kaplamaların mekanik ve aşınma özelliklerinin incelenmesi
An investigation on mechanical and tribological properties of zirconium hafnium nitride coatings
ERDEM ATAR
Doktora
Türkçe
2004
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. SABRİ KAYALI
- Farklı CAD/CAM materyallerinin yüzey parlaklığı ve pürüzlülüğü üzerine polisaj, glaze ve aşındırma işlemlerinin etkisi
The effect of polishing, glazing and grinding procedures on the surface gloss and roughness of different CAD/CAM materials
ÇİĞDEM ÇEBİ TÜYSÜZ
Diş Hekimliği Uzmanlık
Türkçe
2023
Diş HekimliğiSelçuk ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. NECLA DEMİR