An integrated model for complex flow simulations: COMSIM
Başlık çevirisi mevcut değil.
- Tez No: 400135
- Danışmanlar: DR. VEDRANA KUTİJA
- Tez Türü: Doktora
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2001
- Dil: İngilizce
- Üniversite: Unıversıty Of Newcastle Upon Tyne
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Developments in computer technology and numerical techniques have enabled thedevelopment of models, by which more complicated flow processes can be simulatedand by which optimal solutions to water resource and environmental problems can bereached. In this study an integrated model (COMSIM), capable of simulatingparticularly complex flows such as flow through flexible vegetation and discontinuousflow, has been developed.COMSIM can deal with a quasi-three dimensional (Q3D) surface flow simulationincluding the influence of additional flow resistance caused by vegetation, which couldbe submerged or non-submerged and flexible or inflexible. Moreover, it can also handleinteractions of two-dimensional (2D) saturated groundwater and surface water flows.Q3D algorithms use the solution of the 2D shallow water equations (SWE). Thesolution is based on the finite volume method (FVM) with shock capturing scheme(s).Five well-known first and second order accurate shock capturing schemes used in theFVM have been implemented in the model. These schemes are HLL, HLLC, Roe,Osher and flux vector splitting schemes. An attempt is also made to develop a solutionfor simulation of flow in a channel with a step on its bottom and encouraging resultshave been obtained. Second order accuracy in space is achieved using a variableextrapolation method whereas second order accuracy in time is provided in twoalternative ways; van Leer to Hancock method and a predictor-corrector method. Simple2D groundwater equations are also solved by the FVM.The performance of the first and second order shock capturing schemes in terms ofaccuracy, applicability, computation time and stability have been assessed by applyingthe model to a number of test cases. The results of this work are considered to bevaluable contributions to the ongoing research in the use of the shock capturing schemesin the FVM for the solution of the SWE. COMSIM has been applied to a micro-scalewetland project involving interactions of surface and subsurface flows. The results havebeen found to be promising. The influences of various vegetative characteristics such asthe height, stiffness and diameter of a reed on the flow behaviour have beeninvestigated. COMSIM has been tested and validated with published experimentalresults and agreement was satisfactory.
Benzer Tezler
- Integrated CFD-based reduced-order modeling for ice accretion and aerodynamic performance predictions
Bütünleşik CFD tabanli indirgenmiş dereceli model ile buz birikimi ve aerodinamik performans tahmini
ÖMER AKBAL
Doktora
İngilizce
2026
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. METİN ORHAN KAYA
- Unsteady wind farm simulations and short-term power forecasting using actuator disk model in OpenFOAM coupled with WRF
WRF ile akuple OpenFOAM'da aktüatör disk modeli kullanılarak daimi olmayan rüzgar çiftliği simülasyonları ve kısa süreli güç tahmini
HÜSEYİN CAN ÖNEL
Doktora
İngilizce
2023
Havacılık ve Uzay MühendisliğiOrta Doğu Teknik ÜniversitesiHavacılık ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. İSMAİL HAKKI TUNCER
- Kentsel çevre ve yeşil altyapı bağlamında açık alanların performanslarının değerlendirilmesi ve optimizasyonuna yönelik parametrik bir model önerisi
A parametric model roposal for optimization analysis of urban open space performance in the context of green infrastructure and urban environment
SAFİYE ELİF SERDAR YAKUT
Yüksek Lisans
Türkçe
2019
Peyzaj Mimarlığıİstanbul Teknik ÜniversitesiPeyzaj Mimarlığı Ana Bilim Dalı
DOÇ. DR. MELTEM ERDEM KAYA
- Optimizasyon tabanlı bir su kaynakları sistemi modelleme aracının geliştirilmesi ve çok amaçlı sektörel tahsise uygulanması
Development of an optimization-based modeling tool for water resources systems and application to multi-objective sectoral allocation
SALİM YAYKIRAN
Doktora
Türkçe
2025
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALPASLAN EKDAL
- Hesaplamalı tasarım yaklaşımları: Bütünleşik bir tasarım önerisi
Computational design approaches: An integrated design proposal
YEKTA İPEK
Yüksek Lisans
Türkçe
2014
İnşaat Mühendisliğiİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. GÜLEN ÇAĞDAŞ