Geri Dön

İmplantüstü sabit bölümlü protezlerde kullanılan seramik implant dayanaklarının sonlu elemanlar yöntemi ile incelenmesi

The investigation of the ceramic implant abutments used in implant supported fixed dentures by finite element method

  1. Tez No: 192503
  2. Yazar: HÜSEYİN EMİR YÜZBAŞIOĞLU
  3. Danışmanlar: Y.DOÇ.DR. DUYGU SARAÇ
  4. Tez Türü: Doktora
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2006
  8. Dil: Türkçe
  9. Üniversite: Ondokuz Mayıs Üniversitesi
  10. Enstitü: Sağlık Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

ÖZETMPLANTÜSTÜ SAB T BÖLÜMLÜ PROTEZLERDE KULLANILAN SERAM KMPLANT DAYANAKLARININ SONLU ELEMANLAR YÖNTEM LENCELENMESHüseyin Emir YÜZBAŞIOĞLU, Doktora TeziOndokuz Mayıs Üniversitesi, Samsun, Temmuz 2006Diş hekimliğinde tam seramik sistemlerin kullanımının ve implant tedavisininyaygınlaşması sonucunda seramik implant dayanaklarına olan ilgi artmıştır. Bu çalışmada, üçfarklı seramik ve bir titanyum implant dayanağı kullanılarak hazırlanan üç ve dört üyeli sabitbölümlü protezlerde, fonksiyonel kuvvetler altında mekanik ve fiziksel özelliklerindeoluşabilecek değişiklikler ve çevre dokulardaki stres dağılımlarının üç boyutlu sonluelemanlar yöntemi ile incelenmesi amaçlandı.Üç farklı seramik ve bir titanyum implant dayanağı ile hazırlanmış üç ve dört üyelisabit bölümlü protez modelleri üzerinde vertikal ve oblik kuvvetlerin oluşturduğu stresler,MSC. Patran 2005 analiz programı kullanılarak değerlendirildi. Vertikal ve oblik kuvvetleruygulandığında, tüm implant dayanaklarında, sabit bölümlü protezlerde, implant parçalarındave destekleyici dokularda oluşan stresler, Von Mises, maksimum principle ve minimumprinciple stres değerleri kullanılarak karşılaştırıldı.Elde edilen sonuçlarda, seramik implant dayanaklarının kullanıldığı modellerde, heriki yükleme koşulunda titanyum dayanağa benzer stres alanları görüldü. Seramik implantdayanaklarında elde edilen stres değerleri yoğun sinterlenmiş alüminyum oksit esaslı implantdayanağı >zirkonyum oksit ile güçlendirilmiş infiltrasyon seramiği esaslı implant dayanağı >zirkonyum oksit esaslı implant dayanağı şeklinde sıralandı. Sabit bölümlü protez alt yapıporseleninde seramik implant dayanağı kullanılan modellerde titanyum implant dayanağınagöre daha yüksek stres değerleri görülürken, üst yapı porseleninde herhangi bir farkbulunmadı. Dört üyeli implantüstü sabit bölümlü protez modellerinde, üç üyeli modellere göredaha yüksek stres değerleri elde edildi.Bütün bu veriler doğrultusunda seramik implant dayanaklarının posterior bölgedetitanyum implant dayanaklarına alternatif olarak önerilebileceği ve bu çalışmada daha düşükstres değerleri gösteren zirkonyum oksit esaslı implant dayanağının, diğer seramikdayanaklara göre klinik olarak kullanımının daha güvenli olabileceği düşünülmektedir.

Özet (Çeviri)

ABSTRACTTHE INVESTIGATION OF THE CERAMIC IMPLANT ABUTMENTS USED INIMPLANT SUPPORTED FIXED DENTURES BY FINITE ELEMENT METHODHüseyin Emir YÜZBAŞIOĞLU, Ph.D. ThesisOndokuz Mayıs University, Samsun, July 2006As a result of the widespread usage of all-ceramic systems and implant therapy, theinterest concerning ceramic implant abutments are increasing. In this study, the evaluation ofthe changes of mechanical and physical properties of three different ceramic and titaniumimplant abutments, which were used in three and four unit fixed partial dentures, underfunctional forces by three dimensional finite element method was aimed.The stresses which were generated under vertical and oblique forces on three and fourunit fixed partial dentures were evaluated by using MSC Patran 2005 analysis program. Thestresses which occurred under vertical and oblique forces at the implant abutments, implantcomponents, fixed partial dentures and supporting tissues were evaluated comparatively byusing Von Mises, maximum principle and minimum principle stress values in mega Pascalunit.In ceramic abutment models similar stress regions were seen for both loadingconditions, such as with titanium abutment models. The stresses of ceramic abutments werearranged in descending order: densely sintered aluminium oxide implant abutment >zirconium oxide toughened infiltration ceramic based implant abutment > zirconium oxidebased implant abutment. The stress values of the ceramic framework of fixed partial dentureswere higher in ceramic abutment models than in titanium abutment models. No differenceswere found in the stress values of veneering porcelain. Higher stress values were observed forthe four-unit fixed partial denture models than for the three-unit models.As a result of this study, it can be stated that ceramic implant abutments can serve asan alternative for titanium abutments in the posterior region. Zirconium oxide based implantabutments which exhibited lower stress values in this study, should be preferred clinically.

Benzer Tezler

  1. Comparative evaluation of casting retention between different fixed prosthesis using the iti solid abutments with seven cements

    Itı solid abutmentler ve yedi siman kullanarak yapılan farklı sabit protezlerde döküm retansiyonunun karşılaştırılmalı değerlendirilmesi

    AİMAN POURAHMARİ

    Yüksek Lisans

    İngilizce

    İngilizce

    2006

    Diş HekimliğiMarmara Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. YASEMİN KULAK ÖZKAN

  2. İmplant üstü sabit protetik restorasyonlarda kullanılan farklı kaplama materyallerinin, stres dağılımına etkisi

    The Effect of stress distribution of the veneering materials on the implant supported fixed prosthetic restorations

    YALÇIN ÇİFTÇİ

    Doktora

    Türkçe

    Türkçe

    1998

    Diş HekimliğiHacettepe Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. ŞENAY CANAY

  3. Üstçene total dişsizlik vakaları için implant destekli sabit protez uygulamalarında farklı alveol ark formları ve implant pozisyonlarının implantlar çevresindeki stres dağılımına olan etkisinin fem analizi yöntemiyle araştırılması

    A fem analysis study on the influence of alveolar arch form and implant pozitions on stress distribution around implants supporting fixed full-arch prostheses in edentulous maxilla

    GİRAY SAĞAT

    Doktora

    Türkçe

    Türkçe

    2002

    Diş Hekimliğiİstanbul Üniversitesi

    Oral İmplantoloji Ana Bilim Dalı

    PROF.DR. SERDAR YALÇIN

  4. İmplant destekli ağız içi protezlerinin başarısında oklüzyonun önemi

    Başlık çevirisi yok

    EMİN KAZIM ÖRGEV

    Doktora

    Türkçe

    Türkçe

    1997

    Diş HekimliğiEge Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. AYDIN BIÇAKÇI