Geri Dön

Accuracy assessment of digital elevation models derived from shuttle radar topography mission (SRTM)

SRTM uydusundan elde edilen sayısal yükseklik modellerinin doğruluk değerlendirmeleri

  1. Tez No: 183256
  2. Yazar: UMUT GÜNEŞ SEFERCİK
  3. Danışmanlar: DOÇ. DR. GÜRCAN BÜYÜKSALİH
  4. Tez Türü: Yüksek Lisans
  5. Konular: Jeodezi ve Fotogrametri, Geodesy and Photogrammetry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2006
  8. Dil: İngilizce
  9. Üniversite: Zonguldak Karaelmas Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Digital elevation models (DEMs) are a basic component of any geo information system (GIS). The terrain can not only be described by the horizontal components; the height belongs to complete information. In addition height models are required for the generation of orthoimages – one of the most often used photogrammetric product. DEMs can be generated by laser scanning, photogrammetric methods or interferometric synthetic aperture radar (InSAR). In any case it is time consuming and expensive. The worldwide lack of qualified and accessible DEMs has been improved with the Shuttle Radar Topography Mission (SRTM) in February 2000. Based on InSAR height models have been generated covering the world from 56° southern up to 60.25° northern latitude. The DEMs based on the US C-band are available free of charge in the internet (http://edcsgs9.cr.usgs.gov/pub/data/srtm/) with a spacing of 3arcsec, corresponding to approximately 92m at the equator. Only for the USA the data with a spacing of arcsec (~30m at the equator) are also in the WEB. The DEMs based on the German / Italian Xband can be ordered from the DLR, Germany with a spacing of 1 arcsec. In the area of Zonguldak, Turkey, C-band and also X-band height models have been investigated.

Özet (Çeviri)

Digital elevation models are a basic component for any GeoInformation system (GIS), they are required for the generation of orthoimages and correct geometric handling of single images. The generation of height models can be based on stereo photogrammetry, laser scanning and interferometric synthetic aperture radar (InSAR). In any case it is time consuming and expensive. With the Shuttle Radar Topography Mission (SRTM) height models have been generated, covering the earth surface from 56° south to 60.25° north. With the exception of small gaps in steep parts, dry sand deserts and water surfaces the free available US C-band data are covering the area completely while the X-band data, distributed by the DLR, are covering it only partially. In the area of ZonguldakSRTM C-band and X-band height models are available together with reference data. The accuracy and accuracy characteristics of the SRTM height models shall be investigated in the Zonguldak area. This shall include the dependency upon terrain coverage by forest, the dependency upon the terrain inclination and aspects. In addition the loss of accuracy by interpolation shall be analysed.

Benzer Tezler

  1. Sayısal arazi modeli ve batimetrik verilerin kıyı bilgi sistemine entegrasyonu

    Başlık çevirisi yok

    CİHANGİR AYDÖNER

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Jeodezi ve Fotogrametriİstanbul Teknik Üniversitesi

    Uzaktan Algılama Ana Bilim Dalı

    PROF. DR. DERYA MAKTAV

  2. Farklı kaynaklardan üretilen sayısal yükseklik modellerinin doğruluk araştırması

    Accuracy assessment of digital elevation models generated from different sources

    ALTAN YILMAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    Jeodezi ve FotogrametriYıldız Teknik Üniversitesi

    Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. FATMA GÜL BATUK

  3. Farklı kaynaklardan değişik yöntem ve ölçeklerde üretilen sayısal yükseklik modellerinin doğruluk araştırması

    Accuracy assessment of digital elevation models, produced in different scale from different sources by using various techniques

    ERHAN ÖZTÜRK

    Yüksek Lisans

    Türkçe

    Türkçe

    2006

    Jeodezi ve FotogrametriZonguldak Karaelmas Üniversitesi

    Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı

    PROF.DR. ERDAL KOÇAK

  4. Farklı kaynaklardan elde edilen sayısal yükseklik modellerinin ortofonun doğruluğuna etkilerinin araştırılması

    Accuracy assessment of the effect of digital elevation models generated from different sources on orthophoto

    İSMAİL ŞAHİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2007

    Jeodezi ve FotogrametriSelçuk Üniversitesi

    Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. MURAT YAKAR

  5. Investigating the effect of digital elevation model accuracy on the planimetric accuracy of orthorectified spot imagery

    Sayısal arazi modeli doğruluğunun ortorektifiye edilmiş spot görüntülerinin planimetrik doğruluğu üzerindeki etkisinin araştırılması

    MUSTAFA ERDOĞAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2000

    Jeodezi ve FotogrametriOrta Doğu Teknik Üniversitesi

    Jeodezi ve Coğrafi Bilgi Teknolojileri Ana Bilim Dalı

    YRD. DOÇ. DR. MUSTAFA TÜRKER