Elektrikten ısı elde edilmesinde verim ve maliyet
Efficient and cost in getting heat from electricity
- Tez No: 136321
- Danışmanlar: PROF. DR. ŞERAFETTİN ÖZBEY
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Elektrik enerjisi, mikro dalga, ısı enerjisi, çevre, verim ve maliyet
- Yıl: 2003
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Elektronik Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
ÖZET
Özet (Çeviri)
EFFICIENT AND COST IN GETTING HEAT FROM ELECTRICITY SUMMARY Key words - Electrical energy, heat energy, micro wave, environment, productivity, and cost. In this study, electrical energy which is used in order to obtain heat energy, whether it could be used efficiently and how cost would be able to be reduced, has been investigated. Firstly heat energy obtained by micro wave which has a large application area, is mentioned. Microwave heating, cooking and drying involves many-complex physical processes Although it is widely used in industry and in our houses as microwave ovens, the relationship between the applicator and the load could not be understood with all its aspects, yet. So as to give wright decision on this concept electric and magnetic field components which occurs on the load must be calculated, the power density and heat distribution must be visualised. The cost of a microwave ovens, especially that are designed for industrial processes, are very expensive. It is not possible to process different kinds of loads in the same applicator because of the loads' different properties. Specific designs must be made for different loads. Secondly electrical energy which is used to heat buildings has been compared with other energy sources which are used to heat. The negative effect of alternative sources has been determined. The usage of the electrical energy which is used to heat building efficiently and the reduction of the electrical cost has been investigated. In the last part, the usage of the electrical energy which is used to melt metal in industry efficiently, has been explained. A detailed research of induction and arc furnaces have been done. XIII
Benzer Tezler
- Elektro-analjezi'nin konservatif diş tedavisinde ve endodontide uygulaması
Başlık çevirisi yok
HIDIR ÖZTÜRK
Doktora
Türkçe
1983
Diş HekimliğiDicle ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
PROF. DR. BÜLENT BAŞARAN
- 1970 sonrası teknoloji kavramının tekstil malzemelerine ve giysilik kumaşlara getirdiği yenilikler
The innovations in textile materials and clothing fabrics with the technologic concept after 1970
HAVVA HALAÇELİ
Yüksek Lisans
Türkçe
2005
Tekstil ve Tekstil MühendisliğiDokuz Eylül ÜniversitesiTekstil Ana Sanat Dalı
DOÇ. NESRİN ÖNLÜ
- Krom alaşım elementinin bakır esaslı direnç kaynağı elektrod malzemesi özelliklerine etkisi
Başlık çevirisi yok
GÖRKEM ÇARDAK
- Plastik atıkların katalitik ortamda ısı bozunması
Thermal degredation of the waste plastics in catalytic media
RAGIP UFUK FIRAT
Yüksek Lisans
Türkçe
1996
Kimya MühendisliğiAnkara ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. AKİF ŞENER
- Thermal field analysis of electrical insulator
Elektriksel izolatörün sıcaklık alanı incelenmesi
TOLGA ÇOLAK
Yüksek Lisans
İngilizce
1999
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. ARİF ERTAŞ