Yüzey eşlenikli optik yapıların görüntüleme performansının iyileştirme yöntemleri ve analizi
Imaging performance improvement methods and analysis for conformal optical structures
- Tez No: 1017535
- Danışmanlar: PROF. DR. BARIŞ AKAOĞLU
- Tez Türü: Doktora
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2026
- Dil: Türkçe
- Üniversite: Ankara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Küresel kubbenin hava direnci, yüksek Mach hızlarında uçan konformal kubbeye göre daha fazladır. Bu nedenle, sistemin aerodinamik performansını artırmak için konformal kubbe tercih edilmektedir. Ancak konformal kubbe, şekli ve karakteristik özellikleri nedeniyle optik performansı düşürmektedir. Bu sebeple, optik tasarım serbest biçimli (free-form) yüzeylere sahip hareketli mercekler kullanılarak düzeltmiştir. Konformal kubbenin karakteristiklerinden kaynaklanan aberasyonlar, Chebyshev polinom yüzeylerine sahip hareketli merceklerle giderilmiştir. Konformal kubbe ile optik sistemlerin tasarımı ve analizi için Ansys Zemax OpticStudio Programı kullanılmıştır. İlk olarak, konformal kubbe üzerinden bakan optik sistem Paraksiyal yüzeyler ile tasarlanıp, ardından bu sistem kalın merceklere dönüştürülmüştür. Konformal kubbeli optik sistem, 20° (±10) ve 30° (±15) görüş alanı için tasarlanmıştır. Bu tasarımların MTF (Modülasyon Transfer Fonksiyonu) ve Zernike Katsayıları grafiklerle karşılaştırılmıştır. Bu çalışmada konformal kubbe kullanılan optik sistemde, soğutmalı kırıcı tipte (refraktif) bir MWIR (Orta Dalga Kızılötesi) objektif olup, mümkün olan en az sayıda mercekle tasarlanmıştır. Bu sayede daha üretilebilir bir tasarım elde edilmesi amaçlanmıştır. Aerodinamik performans konformal kubbe ile iyileştirilmiş, konformal kubbenin temel sorunu olan optik performans kaybı ise özel serbest biçimli yüzeylerin birbirlerine göre hareket ettirilmesiyle çözülmüştür.
Özet (Çeviri)
The air resistance of the spherical dome is higher than that of the conformal dome flying at high Mach speeds. For improving the aerodynamic performance of the system, the conformal dome is preferred. But the conformal dome reduces the optical performance due to its shape and characteristics. For this reason, the optical design is corrected by using dynamic mercekes with free-form surfaces. The aberration induced due to conformal characteristics of the dome is corrected by using dynamic mercekes with Chebyshev Polynomial Surfaces. The Ansys Zemax OpticStudio Program is used to design and analyze optical systems with the conformal dome. Firstly, the optical system that is looking through a conformal dome is designed by paraxial surfaces, then it is converted to thick mercekes. The optical system with a conformal dome is designed for a field of regard of 20° (±10) and 30° (±15). Their MTF and Zernike Coefficients graphics are compared. In this study, the optical system using a conformal dome is a refractive cooled MWIR objective that is designed such that the smallest number of mercekes possible is used. The purpose of this is to achieve a more manufacturable design. Aerodynamic performance is improved with a conformal dome, and the main problem of the conformal dome, namely, reducing optical performance, is solved by using special freeform surfaces and moving them with respect to each other.
Benzer Tezler
- Plazma arkı eldesi ve yüzey bölgesi modifikasyonunda kullanılabilirliği
Başlık çevirisi yok
ÖZKAN ÖZİPEKLİLER
Yüksek Lisans
Türkçe
1986
Makine MühendisliğiUludağ ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. HALİM DEMİRCİ
- Dislokasyon-dislokasyon etkileşimi
Başlık çevirisi yok
YILDIRIM AYDOĞDU
Yüksek Lisans
Türkçe
1987
Fizik ve Fizik Mühendisliğiİnönü ÜniversitesiFizik Ana Bilim Dalı
Y.DOÇ.DR. MUSTAFA DİKİCİ
- Balıkesir ovasının ve yakın çevresinin jeomorfolojisi ile uygulamalı jeomorfolojisi
Başlık çevirisi yok
AYHAN ÖZOĞUL