Geri Dön

Steroid türü ilaçların kontrollü salımı için olivetol temelligözenekli poliester yapıların geliştirilmesi

Development of olivetol-based porous polyester structures for controlled release of steroid type drugs

  1. Tez No: 1006609
  2. Yazar: İLKNUR CİRAN
  3. Danışmanlar: PROF. DR. SÜLEYMAN KÖYTEPE
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2026
  8. Dil: Türkçe
  9. Üniversite: İnönü Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Çalışma kapsamında, medikal alanda oldukça önemli olan streoid yapılı ilaçların düzenli, uzun süreli ve kontrollü bir şekilde salımını gerçekleştirmek için film formlarda olivetol temelli poliester yapılar geliştirilmiştir. Özellikle polimerik yapı olarak alifatik yapılı polyester üniteler tercih edilmiş olup, elde edilen polimerik yapının ilaç taşıma kapasitesini geliştirmek amacı ile hem olivetol grupları hemde polisakkarit üniteleri bir arada kullanılıştır. Sentezler sırasında poliester ünitesinin oluşması için süksinik asit ile olivetol ve polisakkarit yapıları farklı oranlarda kullanılmıştır. Polisakkarit yapısı olarak ise β- siklodekstrin, selüloz ve kitosan yapıları kullanılarak üç farklı grupta yapılar sentezlenmiştir. Özellikle çalışmanın 1. aşamasında farklı oranlarda β-siklodekstrin kullanılarak (%1, %5 ve %10) 3 farklı polyester yapısı elde edilmiştir. Bu yapıların üretimi sırasında olivetol, poli(etilen glikol) ve β-siklodekstrin kullanılmıştır. Olivetol miktarı %10 olarak PEG miktarı ise olivetol miktarına bağlı olarak ayarlanmıştır. Bu sayede farklı oranlarda olivetol içeren gözenekli polyester yapılar elde edilmiştir. Elde edilen polyester yapılar Fourier Transform Infrared spektroskopisi (FTIR) ve x-ray spektroskopisi (XRD) teknikleri ile yapısal olarak aydınlatılmıştır. Ayrıca elde edilen her bir polimerik yapının morfolojik özellikleri ve termal özellikleri Taramalı Elektron Mikroskobu (SEM) ve Termal analiz yöntemleri kullanılarak detaylı olarak araştırılmıştır. Çalışmanın 2. aşamasında selüloz ve 3.aşamasında kitosan üniteleri yanında olivetol ve farklı oranlarda β-siklodekstrin kullanılarak polyester yapıları hazırlanmıştır. Elde edilen polyester yapıları kimyasal, termal ve morfolojik özellikleri incelendikten sonra, film formasyonunda ilaç yüklemeleri gerçekleştirilmiştir. Çalışma kapsamında hazırlanan polyester yapıları alifatik yapılı olduğu ve β-siklodekstrin üniteleri içerdiği için stereod türü ilaçların tutunması için önemli bir potansiyele sahiptir. Bu nedenle çalışmada model bir stereod türü ilaç olarak metilpiretnizolon, absorpsiyon ve salım kinetikleri belirlenmiştir. Sonuç olarak hazırlanan poliester yapılarının yaklaşık olarak 24 saat düzenli ilaç salımı yaptığı belirlenmiştir.

Özet (Çeviri)

In this study, olivetol-based polyester structures in film form were developed to achieve the regular, long-term, and controlled release of steroid-structured drugs, which are of considerable importance in the medical field. Specifically, aliphatic polyester units were preferred as the polymeric structure, and both olivetol groups and polysaccharide units were used together to improve the drug delivery capacity of the resulting polymeric structure. During the synthesis, succinic acid, olivetol, and polysaccharide structures were used in different ratios to form the polyester unit. Three different groups of structures were synthesized using β-cyclodextrin, cellulose, and chitosan as the polysaccharide structures. In particular, in the first stage of the study, three different polyester structures were obtained using different ratios of β-cyclodextrin (1%, 5%, and 10%). Olivetol, poly(ethylene glycol), and β-cyclodextrin were used in the production of these structures. The amount of olivetol was set at 10%, and the amount of PEG was adjusted according to the amount of olivetol. In this way, porous polyester structures containing different ratios of olivetol were obtained. The obtained polyester structures were structurally elucidated using Fourier Transform Infrared spectroscopy (FTIR) and x-ray spectroscopy (XRD) techniques. In addition, the morphological and thermal properties of each polymeric structure were investigated in detail using Scanning Electron Microscopy (SEM) and thermal analysis methods. In the second stage of the study, polyester structures were prepared using cellulose units, and in the third stage, using chitosan units along with olivetol and different ratios of β-cyclodextrin. After examining the chemical, thermal, and morphological properties of the obtained polyester structures, drug loading was carried out in film formation. Since the polyester structures prepared in this study are aliphatic and contain β-cyclodextrin units, they have significant potential for the attachment of stereotype drugs. Therefore, methylpyrethnisolone was used as a model stereotype drug in this study, and its absorption and release kinetics were determined. In conclusion, it was determined that the prepared polyester structures released the drug regularly for approximately 24 hours.

Benzer Tezler

  1. Meme kanseri ameliyat öncesi tedavisine yönelik olarak manganez dioksit (Mn02) neoadjuvan nanoyapıların hazırlanması ve in vitro etkinliğinin incelenmesi

    Preparation of Manganese Dioxide (MnO2)neoadjuvant nanostructures for breast cancer preoperative treatment and examination of their in vitro activity

    BEYZANUR DOĞRUYOL PINAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    Biyoteknolojiİzmir Katip Çelebi Üniversitesi

    Nanoteknoloji Ana Bilim Dalı (disiplinlerarası)

    DOÇ. DR. DİDEM ŞEN KARAMAN

    PROF. DR. MUSTAFA CAN

  2. Bazı oksikam türü ilaç etken maddelerinin metal bağlama özelliklerinin spektroflorimetrik yöntemle incelenmesi

    Investigation of the metal bonding properties of some oxicam type drug active substances using spectrofluorimetric method

    HATİCE KAÇAR ÇETİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    KimyaSelçuk Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. SELMUŞ BENİZ GÜNDÜZ

  3. Üç boyutlu (3B) ortamda oluşturulan meme kanseri sferoidlerinde abemaciclibin etkisinin araştırılması

    Investigation of the effect of abemaciclib on breast cancer spheroids created in a three-dimensional (3D) environment

    CAN SÜRÜCÜOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    BiyolojiHacettepe Üniversitesi

    Biyoloji Ana Bilim Dalı

    PROF. DR. AYSUN KILIÇ SÜLOĞLU

  4. Effect of medicinal plants Epilobium hirsutum L. and Viscum album L. on rat liver flavin-containing monooxygenase activity and expression

    Tıbbi bitkiler Epilobium hirsutum L. ve Viscum album L.'nin sıçan karaciğer mikrozomal flavin monooksijenaz (FMO) aktivitesi ve ekspresyonu üzerine etkileri

    HASAN UFUK ÇELEBİOĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2012

    BiyokimyaOrta Doğu Teknik Üniversitesi

    Biyoloji Ana Bilim Dalı

    DOÇ. DR. AYŞE MİNE GENÇLER ÖZKAN

    PROF. DR. ORHAN ADALI

  5. Investigation of immune regulation in pediatriceosinophilic esophagitis (EOE) patients

    Pediatrik eozinofilik özofajit (EOE) hastalarında immün regülasyonunun araştırılması

    CEREN BÜYÜK

    Yüksek Lisans

    İngilizce

    İngilizce

    2025

    Allerji ve İmmünolojiİstanbul Teknik Üniversitesi

    Moleküler Biyoloji-Genetik ve Biyoteknoloji Ana Bilim Dalı (disiplinlerarası)

    PROF. DR. AYÇA SAYI YAZGAN