Faz değiştiren maddeler ile balistik kompozit koruyucu başlıkların ısıl kontrolü
Thermal control of ballistic composite protective heads using phase change materials
- Tez No: 981590
- Danışmanlar: PROF. DR. YELİZ KONUKLU
- Tez Türü: Yüksek Lisans
- Konular: Enerji, Energy
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Niğde Ömer Halisdemir Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Enerji Bilimi ve Teknolojileri Ana Bilim Dalı (disiplinlerarası)
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada, termal enerji depolama yöntemleri arasında öne çıkan faz değiştiren maddelerin (FDM), balistik kompozit koruyucu başlıklarda termal konforu artırma potansiyeli incelenmiştir. Çalışma kapsamında FDM olarak laurik ve miristik yağ asitlerinin ötektik karışımları kullanılmıştır. Kaskın güvenlik bütünlüğünü bozmadan termal konfor sağlamak amacıyla FDM'lerin mikrokapsüllenerek başlıklara entegre edilmesi yöntemi ele alınmıştır. Elde edilen mikrokapsüllenmiş FDM'lerin termal, kimyasal ve morfolojik özellikleri, diferansiyel taramalı kalorimetre (DSC), fourier dönüşümlü kızılötesi spektroskopisi (FTIR) ve taramalı elektron mikroskobu (SEM) ile belirlenmiştir. Bu analizlerin ardından, mikrokapsüller başlıklara entegre edilerek kızılötesi termal kamera ile termal performansları karakterize edilmiştir. Üretilen mikrokapsüllerin, koruyucu başlıklarda 150 dakika boyunca termal konfor sağladığı belirlenmiştir.
Özet (Çeviri)
This study investigates the potential of Phase Change Materials (PCMs), which are among the most prominent thermal energy storage methods, to enhance thermal comfort in ballistic composite protective helmets. For this investigation, a eutectic mixture of lauric and myristic acid was used as the PCM. The research focuses on integrating the PCMs into the helmets via microencapsulation to ensure thermal comfort without compromising the structural integrity of the helmet. The thermal, chemical, and morphological characteristics of the resulting microencapsulated PCMs were comprehensively characterized using differential scanning calorimetry, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Following these analyses, the microcapsules were successfully integrated into the protective helmets. Their thermal performance was subsequently evaluated using an infrared thermal camera. The fabricated microcapsules were determined to provide thermal comfort within the protective helmets for up 150 minutes.
Benzer Tezler
- Faz değiştiren madde ile prefabrik yapıların soğutulması
Cooling prefabricated place with phase changing material
İBRAHİM CEMALEDDİN KULOĞLU
Yüksek Lisans
Türkçe
2018
EnerjiFırat ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
PROF. DR. HİKMET ESEN
- Mikrokapsüllenmiş faz değiştiren maddelerde termal enerji depolama ile binalarda enerji tasarrufu
Energy conservation in buildings using thermal energy storage in microencapsulated phase change materials
YELİZ KONUKLU
- Isıl enerjinin faz değiştiren maddeler kullanılarak depolanması
Thermal energy storage using phase-change materials
CANSU GÜMÜŞ
Yüksek Lisans
Türkçe
2019
EnerjiYalova ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MEHMET SELÇUK MERT
DR. ÖĞR. ÜYESİ HATİCE HANDE MERT
- Faz değiştiren maddelerle kombine edilen tekstil ürünlerinin geliştirilmesi
A research on developing smart textiles with combining phase change materials
GAMZE SÜPÜREN
Yüksek Lisans
Türkçe
2007
Tekstil ve Tekstil MühendisliğiEge ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NİLGÜN ÖZDİL
- Faz değiştiren maddelerin ısıl konfor amaçlı kullanılabilirliğinin araştırılması
Investigation of phase-changing materi̇al for thermal comfort purpose
ECE YILMAZ YİĞİT
Yüksek Lisans
Türkçe
2019
EnerjiIsparta Uygulamalı Bilimler ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET KABUL