Kolemanit-realgar minerallerinin yüzey özellikleri ve flotasyon yöntemi ile arseniğin kolemanitten ayrılması
Surface properties of colemanite-realgar and separating arsenic from colemenite with flotation
- Tez No: 96950
- Danışmanlar: DOÇ. DR. SABİHA KOCA
- Tez Türü: Doktora
- Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
- Anahtar Kelimeler: Arsenik, Flotasyon, Kolemanit, Zeta potansiyeli, Arsenic, Flotation, Colemanite, Zeta potential
- Yıl: 2000
- Dil: Türkçe
- Üniversite: Eskişehir Osmangazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Maden Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
ÖZET Bu çalışmanın amacı, kolemanitten arsenikti bir mineral olan realgann, flotasyon yöntemi ile aynlması olanaklarım araştırmaktır. Bu nedenle her iki mineralin yüzey özellikleri, çeşitli iyonların ve flotasyon reaktiflerinin flotasyona etkisi incelenmiştir. Emet kolemanit yatağından alınan saf kolemanit ve realgar kristalleri ile elektrokinetik potansiyel ve temas açısı ölçümleri yapılmıştır. Bu iki mineralin flotasyon reaktiflerini adsorplama mekanizmalarım açıklamak için infrared spektroskopi çalışmaları yapılmıştır. Elektrokinetik potansiyel ölçümleri sonucu; kolemanitin pH 8-12 arasında, realgann ise pH 6-12 arasmda yapılan zeta potansiyel ölçümlerinde sıfır yük noktası görülmeyip her iki mineralinde yüzeylerinin negatif olduğu belirlenmiştir. Çeşitli flotasyon toplayıcılarının ve NaaSiCVın varlığında yapılan infrared spektroskopi çalışmalarında realgar minerali için karekteristik adsorpsiyon bantları tespit edilememiş olup, kolemanit minerali için adsorpsiyon bantları tespit edilmiş ve çalışılan reaktiflerin kolemanit minerali yüzeyine adsorpsiyonlanmn kimyasal ve fiziksel olabileceği tespit edilmiştir. Dinamik captive bubble tekniği ile yapılan temas açısı ölçümlerinde; kolemanit mineralinin toplayıcısız 32-34°, toplayıcı ilavesiyle en fazla 45-47° temas açısı değerleri ölçülmüştür. Realgar mineralinin ise, toplayıcısız 26-27°, toplayıcı ilavesiyle en fazla 58-63° temas açısı değerleri ölçülmüştür. Belirlenen özelliklere göre, her iki minerali birbirinden ayırabilmek için mikroflotasyon deneyleri yapılmıştır. Flotasyon çalışmalarında; mikroflotasyon yöntemi ile, kolemanit minerali için en iyi toplayıcının % 97.11 flotasyon verimi ile Sodyum Oleat olduğu ve bu toplayıcının varlığında en iyi flotasyon koşullan tespit edilmiştir.n Realgar minerali için ise, en iyi toplayıcının R840 olduğu tespit edilmiş olup, ancak R840'ın kolemanit minerali içinde iyi bir toplayıcı olması nedeniyle, seçimliliğin sağlanması için toplayıcı olarak % 83.45 flotasyon verimi ile KAX seçilmiş ve bu toplayıcının varlığında en iyi flotasyon koşullan tespit edilmiştir. Saf kolemanit ve realgar mineralleri için tespit edilen en iyi koşullarda, miktarca % 0.5 ve % 5 realgar içerikli olarak hazırlanan yapay numuneler ile mikroflotasyon hücresinde ve ocaktan alman % 32.45 B2O3 ve 1250 ppm As içerikli tüvenan cevher numunesi ile laboratuvar tipi Denver flotasyon makinesinde deneyler yapılmıştır.
Özet (Çeviri)
in SUMMARY The purpose of this study is to investigate the possibilities of separating arsenic minerals, mostly realgar, from colemanite minerals. For this purpose, surface properties of these two minerals and the effects of flotation reagents and various ions on flotation were examined. Electrokinetic potential and contact angle measurements were conducted on pure colemanite and realgar crystalles which were collected from Emet Colemanite deposits. Infrared spectroscopy studies were also carried out in order to determine the adsorption mechanisms of flotation reagents on the two minerals. In the electrokinetic potential measurements, both colemanite and realgar did not show zpc between pH 8-12 and 6-12 respectively. Both minerals were changed negatively at the studied range. In the presense of various flotation collectors and Na2SiC<3, infrared spectroscopy studies were performed on both minerals and characteristics adsorption bands were not obtained for realgar mineral, but obtained for colemanite mineral. It was detemined that the adsorption mechanisms of studied flotation collectors on colemanite could be both pyhsical and chemical. The contact angle measurement, performed with dynamic captive bubble technigue, were determined 32-34° without collectors and as 45-47° with collectors for colemanite while as 26-27° without collectors and as 58-63° with collectors for realgar. In order to separate these two minerals, microflotation experiments were carried according to predetermined surface properties. It was determined during the microflotation experiments that sodium oleate was the best collector for colemanite with flotation recovery of 97.1 1 %.IV R840 was determined as the best collector for realgar, nevertheless it was also determined a good collector for colemanite. KAX was therefore choosen as collector and produced 83.45 % flotation on recovery. The optimum flotation conditions were determined in the presence of KAX collector. Microflotation experiments were also conducted on artifical samples with 0.5 % and 5 % realgar content by weight in a laboratory type of Denver flotation machine using the best conditions obtained for pure colemanite and realgar minerals. Another set of experiments were also performed on the naturel sample collected from open pit with 32.45 % B203 and 1250 ppm As content.
Benzer Tezler
- Etibank Emet Kolermanit İşletmesi gölet artıklarının zenginleştirme olanaklarının araştırılması
Başlık çevirisi yok
MEHMET SAVAŞ
Yüksek Lisans
Türkçe
1994
Maden Mühendisliği ve MadencilikEskişehir Osmangazi ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ENDER SÖNMEZ
- Arsenikli kolemanit cevherinden boraks üretimi
The Production of borax from colemanite ore with arsenic
AHMET SAKARYA