Farklı yöntemlerle pürüzlendirilen diş minesinin restorasyonla bağlanma dayanımının karşılaştırılması
Comparison of Bond Strength of Restorations to Enamel Prepared with Different Surface Roughening Methods
- Tez No: 945568
- Danışmanlar: PROF. DR. CAFER TÜRKMEN
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Mine, kompozit, yüzey pürüzlendirme, makaslama bağlanma dayanımı, Dental bonding, Dental mine, Mikroskopi-elektron taramalı, Yüzey pürüzlülüğü, Enamel, composite, surface roughening, shear bond strength, Dental bonding, Dental enamel, Microscopy-electron scanning, Surface roughness
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Restoratif Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Restoratif Diş Tedavisi Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Amaç: Bu çalışma, farklı yüzey pürüzlendirme yöntemlerinin monokromatik ve nanohibrit kompozit rezinlerin mine yüzeyine bağlanma dayanımına etkisini in vitro koşullarda değerlendirmeyi amaçlamaktadır. Gereç ve Yöntem: Çalışmaya toplamda 80 adet çekilmiş anterior diş dahil edilmiştir. Dişler mine-sement birleşim yerinden kesilmiş ve pürüzlendirme öncesi düz bir yüzey elde edilmesi amacıyla labial yüzeyleri yukarı bakacak şekilde akrilik bloklara yerleştirilmiştir. Numuneler, rastgele iki ana gruba ayrılmıştır: Grup A, monokromatik kompozit rezin (Omnichroma, Tokuyama Dental, Tokyo, Japonya); Grup B, nanohibrit kompozit rezin (Essentia Starter Kit Syringe, GC, Japonya). Her grup, pürüzlendirme yöntemine göre dört alt gruba ayrılmıştır: asitle muamele edilmiş kontrol grubu, kalın/orta grenli disk ile pürüzlendirilmiş grup, sarı bantlı elmas frez ile pürüzlendirilmiş grup ve Erbiyum, krom katkılı itriyum selenyum galyum garnet (Er,Cr:YSGG) lazer ile pürüzlendirilmiş grup. Tüm dişler üniversal adeziv sistemi kullanılarak restore edilmiş, 5000 termal siklus işlemine tabi tutulmuş ve 37°C'de distile suda 24 saat bekletilmiştir. Makaslama bağlanma dayanımları evrensel test cihazı (Shimadzu Corp., Kyoto, Japonya) ile ölçülmüş, kopma tipleri ise stereomikroskop ve taramalı elektron mikroskobu (SEM) ile değerlendirilmiştir. Veriler, non-parametrik istatistiksel yöntemler kullanılarak analiz edilmiştir. Bulgular: Kruskal-Wallis testi sonucunda, grupların eşit merkezi eğilimlere sahip olmadığı tespit edilmiştir (p<0,05). Non-parametrik Tamhane testi ile yapılan ikili karşılaştırmalar sonucunda, nanohibrit kompozit grubunda, Er,Cr:YSGG lazer ile pürüzlendirilmiş dişlerde en yüksek bağlanma dayanımı elde edilmiştir (p<0,05). Diğer gruplarla kıyaslandığında bu fark istatistiksel olarak anlamlıdır. Ki-kare testi sonuçlarına göre, kopma tiplerinin dağılımında anlamlı bir farklılık bulunmamıştır (p>0,05). Sonuç: Bu in vitro çalışmada, nanohibrit kompozitlerin monokromatik kompozitlere kıyasla diş mine yüzeyine daha yüksek bağlanma dayanımı sağladığı tespit edilmiştir. Er,Cr:YSGG lazer yöntemi, diğer yöntemlere kıyasla en yüksek bağlanma dayanımını sağlamıştır.
Özet (Çeviri)
Objective: This study aimed to evaluate the in vitro effects of different surface roughening methods on the bond strength of monochromatic and nanohybrid composite resins to enamel surfaces. Materials and Methods: A total of 80 extracted anterior teeth were included in the study. Teeth were sectioned and embedded in acrylic blocks with labial surfaces facing upward for roughening. The specimens were randomly divided into two main groups: Group A, restored with monochromatic composite resin (Omnichroma, Tokuyama Dental, Tokyo, Japan) and Group B, restored with nanohybrid composite resin (Essentia Starter Kit Syringe, GC, Japan). Each group was further subdivided into four subgroups based on the surface roughening method applied: acid-etched control group, roughened with thick/medium-grit discs, roughened with yellow-striped diamond burs, and roughened with Er,Cr:YSGG laser. All teeth were restored using a universal adhesive system, subjected to 5000 thermal cycles, and stored in distilled water at 37°C for 24 hours. Shear bond strength values were measured using a universal testing machine (Shimadzu Corp., Kyoto, Japan), and fracture types were evaluated using stereomicroscope and scanning electron microscope (SEM). Data were analyzed using non- parametric statistical methods. Results: The Kruskal-Wallis test revealed that the central tendencies of the groups were not equal (p<0.05). Pairwise comparisons conducted using the non-parametric Tamhane test demonstrated that the highest bond strength was achieved in the nanohybrid composite group, particularly for specimens roughened with the Er,Cr:YSGG laser (p<0.05). This difference was statistically significant compared to other groups. According to the Chi-square test results, no significant differences were observed in the distribution of fracture types among the groups (p>0.05). Conclusion: This in vitro study concluded that nanohybrid composites exhibited higher bond strength to enamel surfaces compared to monochromatic composites. Among the tested roughening methods, the Er,Cr:YSGG laser provided the highest bond strength, compared to other roughening methods.
Benzer Tezler
- Buğdayda farklı melezleme teknikleri kullanarak tohum tutma oranının saptanılması
Başlık çevirisi yok
İSMAİL TÜZÜN
Yüksek Lisans
Türkçe
1986
ZiraatUludağ ÜniversitesiTarla Bitkileri Ana Bilim Dalı
PROF. DR. HALİS RUHİ EKİNGEN
- İzmir'de bazı yolların kapatılarak yaya bölgeleri oluşturma da kent peyzajını geliştirme açısından yeniden planlanması üzerinde araştırmalar
Başlık çevirisi yok
BAHAR TÜRKYILMAZ
Yüksek Lisans
Türkçe
1985
Şehircilik ve Bölge PlanlamaEge ÜniversitesiŞehir ve Bölge Planlama Ana Bilim Dalı
- Diyabetus mellitus'da gözlenen mikrovasküler komplikasyonların prostaglandinler ile olan ilişkisi
The Relation of microvaskular complications observed in diabetes mellitus with prostoglandins
CANAN NEBİGİL
Doktora
Türkçe
1985
Eczacılık ve FarmakolojiCumhuriyet ÜniversitesiFarmakoloji Ana Bilim Dalı
YRD. DOÇ. DR. YUSUF SARIOĞLU
- Bazı esterlerin kinetik incelenmesi ve termodinamik parametrelerin belirlenmesi
Kinetic study and detesmination of thermodnamic parameters of some esters
İBRAHİM TAŞ
Yüksek Lisans
Türkçe
1986
Kimya MühendisliğiUludağ ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. MUSTAFA CEBE
- Çoklu amaçların çözümlemesinde amaç programlaması ile genelleştirilmiş ters yaklaşımı ve yem sanayiinde bir uygulama
Goal programming and generalieed inverse approaches in the multi-objective analysis and application in feed industry
HASAN BAL