Poli(orto-fenilendiamin) modifiye grafit kalem ucu elektrodun asetilsalisilik asite duyarlı hale getirilmesi
Sensitization of poly(ortho-phenylenediamine) modified graphite pencil tip electrode to acetylsalicylic acid
- Tez No: 919340
- Danışmanlar: PROF. DR. SAİM TOPÇU
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Asetilsalisilik asit, Diferensiyel puls voltametrisi, Kurşun kalem, Molekül baskılama tekniği (MIP), O-fenilendiamin, Differential pulse voltammetry, Pencil, Molecule imprinting technique (MIP), O-phenylene
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Giresun Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada, asetilsalisilik aside (ASA) duyarlı moleküler baskılı poli(orto- fenilendiamin) elektrot sentezi amaçlanmıştır. Çalışma elektrodu olarak 0,7 mm kurşun kalem (PGE) seçilmiştir. Elektrotlar -0,4 V ila +1,0 V potansiyel aralığı, 50 mV/s tarama hızı ve 25 döngü ile elektropolimerizasyonda sentezlenmiştir. Çalışmalar pH 8.60 ve 7.60'da 0.2 M amonyak tamponunda gerçekleştirilmiştir. o-FD konsantrasyonu 0,5, 1, 2, 3, 4 ve 5 mM'da yükseltilmiş ve asetil salisilik asit konsantrasyonu son çözeltide 1 mM'da sabit tutulmuştur. Monomer/analit oranı 1:2, 1:1, 2:1, 3:1, 4:1, 5:1 olan altı farklı molekül baskılı polimer (MIP) sentezlenmiştir. Asetilsalisilik asit elektroaktif bir madde olmadığı için elüsyon ve inkübasyon süreçlerinin kontrolü Potasyum Ferrisiyanürün (K 3 [Fe(CN) 6 ]) DPV piki ile indirekt analiz yöntemiyle takip edilmiştir. Çalışmaya en iyi sonuçları veren 1:2 oranı sabit tutularak devam edilmiştir. Elüsyon ve inkübasyon işlemleri farklı koşullarda gerçekleştirilmesine rağmen hem moleküler baskılanmamış polimerin (NIP) hem de MIP tipi polimerin DPV pikine etki ettiği gözlemlenmiştir. En uygun koşullar altında MIP polimerinin ASA moleküllerine NIP elektrottan %20 daha iyi yanıt verdiği belirlenmiştir.
Özet (Çeviri)
In this study, the synthesis of acetylsalicylic acid (ASA) sensitive molecularly imprinted poly(ortho-phenylenediamine) electrode was aimed. A 0.7 mm pencil lead (PGE) was chosen as the working electrode. Electrodes were synthesised in electropolymerisation with a potential range of -0.4 V to +1.0 V, a scan rate of 50 mV/s and 25 cycles. The studies were carried out in 0.2 M ammonia buffer at pH 8.60 and 7.60. The concentration of o-FD was increased to 0.5, 1, 2, 3, 4 and 5 mM and the concentration of acetyl salicylic acid was kept constant at 1 mM in the final solution. Six different molecularly imprinted polymer (MIP) were synthesized with a monomer to analyte ratio of 1:2, 1:1, 2:1, 3:1, 4:1, 5:1. Since acetylsalicylic acid is not an electroactive substance, the control of elution and incubation processes was followed by DPV peak of Potassium Ferricyanide (K 3 [Fe(CN) 6 ]) by indirect analysis method. The study was continued by keeping the 1:2 ratio constant which gave the best results. Although the elution and incubation processes were carried out under different conditions, it was observed that both the non-molecularly imprinted polymer (NIP) and the MIP type polymer affected the DPV peak. It was determined that MIP polymer produced 20% better response to ASA molecules than NIP electrode under the most favourable conditions.
Benzer Tezler
- Poli(m-fenilendiamin-ko-m-aminobenzoik asit) kopolimerinin sentezi ve spektroskopik özelliklerinin incelenmesi
Synthesis, doping and spectroscopic properties of poly(m-phenylenediamine-co-m-aminobenzoic acid) copolymer
MURAT DİKMEN
- Graphene and silane reinforced polyurethane nanocomposite coating
Grafen ve silan takviyeli poliüretan nanokompozit kaplama
İREM ELMAS KANT ALEMDAR
Doktora
İngilizce
2025
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NİLGÜN KIZILCAN
- Reaction of acetophenone-formaldehyde resin with s-triazone compounds for fire resistance polyurethane
Poliüretan yanmazlık dayanımı için asetofenon formaldehit reçinesinin s-triazon bileşiği ile reaksiyonu
MİNE MUTLU
Yüksek Lisans
İngilizce
2017
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NİLGÜN KIZILCAN
- Çinko-iyon sulu bataryalar için katot malzemelerin geliştirilmesi
Development of cathode materials for zinc-ion aqueous batteries
SELİN SARIYER
Doktora
Türkçe
2025
Kimya MühendisliğiGebze Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. REZAN DEMİR ÇAKAN
- Poli (epiklorohidrin-ko-etilen oksit-ko-allil glisidil eter) elastomerlerinin ısıl yaşlanma özelliklerine antioksidanların etkisi
Effect of antioxidants on thermal aging properties of poly (epichlorohydrin-co-ethylene oxide-co-allyl glycidyl ether) elastomers
CEREN GÖKTAŞ
Yüksek Lisans
Türkçe
2024
Polimer Bilim ve TeknolojisiHacettepe ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. MURAT ŞEN