Sol-jel yöntemi ile sentezlenen bor katkılı CuFeO2 malzemesinin fiziksel ve manyetik özelliklerinin incelenmesi
Investigation of physical and magnetic properties of boron-done CuFeO2 material synthesized by sol-gel method
- Tez No: 902480
- Danışmanlar: PROF. DR. HAKAN ÖZTÜRK
- Tez Türü: Yüksek Lisans
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: Delafosit, CuFe1-xBxO2, XAFS, Sinkrotron, Delafossit, CuFe1-xBxO2, XAFS, Synchrotron
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Osmaniye Korkut Ata Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Fizik Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada teknolojik uygulamaları ile dikkat çeken, antiferromanyetik yarı iletken CuFeO2 ve Bor katkılı (CuFe1-xBxO2) (x = 0.00, 0.01, 0.02, 0.05, 0.10, 0.20) numuneleri sol-jel yöntemi ile sentezlenmiştir. Sentezlenen bu numunelerin yapısal ve manyetik özellikleri incelenmiştir. Numunelerin yapısal karakterizasyonu X-ışını teknikleri (XRD ve XAFS) ve taramalı elektron mikroskobu (SEM) ölçümleri kullanılarak gerçekleştirilmiştir. Manyetik özellikleri M-T, M-H ölçümleri ve AC alınganlık ölçümleri ile belirlenmiştir. Tüm örnekler hem ZFC hem de FC koşullarında benzer M-T eğilimlerine sahiptir. Bu da CuFe1-xBxO2'de Fe ile B ikamesinin CuFeO2'nin ana manyetik karakteristiğini etkilemediğini göstermektedir. Örneklerin manyetik metastabilitesi nedeniyle tüm örneklerde ZFC ve FC eğrileri arasında çatallanmalar gözlenmektedir. Manyetik metastabilite durumu ya ince nanoparçacıkların manyetik momentlerinin bloklama sıcaklığının altında bloke olması ya da spin-cam durumundan daha kararlı ferromanyetik duruma geçişten kaynaklanmaktadır. Tüm örnekler 10-300 K sıcaklık aralığında ferromanyetik bir karakteristik olarak davranmaktadır. Ana CuFeO2 kafesinde Fe iyonları ile bor ikamesi doygunluk ve remnant (kalıntı) mıknatıslanmayı azaltırken, zorlayıcı alan yapıdaki yüksek bor içeriği ile artmıştır.
Özet (Çeviri)
In this study, antiferromagnetic semiconductor CuFeO2 and boron doped (CuFe1-xBxO2) (x = 0.00, 0.01, 0.02, 0.02, 0.05, 0.05, 0.10, 0.20) samples, which attract attention with their technological applications, were synthesized by sol-gel method. Structural and magnetic properties of these synthesized samples were investigated. Structural characterization of the samples was carried out using X-ray techniques (XRD and XAFS) and scanning electron microscopy (SEM) measurements. Magnetic properties were determined by M-T, M-H measurements and AC susceptibility measurements. All samples have similar M-T trends in both ZFC and FC conditions. This indicates that the substitution of Fe with B in CuFe1-xBxO2 does not affect the main magnetic characteristics of CuFeO2. Bifurcations between the ZFC and FC curves are observed in all samples due to the magnetic metastability of the samples. The magnetic metastability is due to either the blocking of the magnetic moments of the fine nanoparticles below the blocking temperature or the transition from the spin-glass state to the more stable ferromagnetic state. All samples behave as a ferromagnetic characteristic in the temperature range 10-300 K. The substitution of boron with Fe ions in the main CuFeO2 lattice reduces the saturation and remnant magnetization, while the coercive field is enhanced by the high boron content in the structure.
Benzer Tezler
- Effects of boron doping and pre-heat treatment on the stabilization of tetragonal zirconia in sol-gel derived ZrO2-SiO2 glass–ceramics
Sol-jel esaslı ZrO2-SiO2 cam–seramiklerde bor katkısı ve ısıl işlem koşullarının tetragonal zirkonya faz stabilizasyonuna etkilerinin incelenmesi
YUSUF ÇELİK
Doktora
İngilizce
2026
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MİRAY ÇELİKBİLEK ERSUNDU
- Lityum iyon piller için bor katkılı-katkısız li2moo3, li2motio3 ve li2moti3o6 katot materyallerinin sentezi, karakterizasyonu ve elektrokimyasal özelliklerinin incelenmesi
Investigation of the synthesis, characterization and electrochemical properties of boron-dopped and undoputed li2moo3, li2motio3 and li2moti3o6 cathode materials for lithium ion batteries
GÖKHAN YILDIRIM
- Süper kapasitör uygulamaları için nano bor karbür (B4C) sentezi
Synthesis of nano boron carbide (B4C) for supercapasitor applications
SELİN TÜMKAYA
Yüksek Lisans
Türkçe
2023
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. CENGİZ KAYA
- Farklı uygulama alanları için nano boyutta bor esaslı malzemelerin sentez ve karakterizasyonu
Synthesis and characterization of boron based nano-sized materials for different application areas
CANSU NOBERİ
Doktora
Türkçe
2017
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. CENGİZ KAYA
- Kemik doku mühendisliği için bor katkılı biyoseramik/PVDF-PCL kompozit iskelelerin geliştirilmesi ve İn-Vitro etkinliğinin belirlenmesi
Development of boron-doped bioceramic/PVDF-PCL composite scaffolds for bone tissue engineering and determination of In-Vitro efficacy
BÜŞRA MUTLU
Doktora
Türkçe
2025
Metalurji MühendisliğiBursa Teknik Üniversitesiİleri Teknolojiler Ana Bilim Dalı
DOÇ. DR. ŞEYMA DUMAN
DR. ÖĞR. ÜYESİ FATMA DEMİRCİ