Yapıda alçı ve alçıdan elemanların kullanımı
The Use of gypsum and gypsum components in the buildings
- Tez No: 8657
- Danışmanlar: DOÇ. DR. TURHAN TÜZEMEN
- Tez Türü: Yüksek Lisans
- Konular: Mimarlık, Architecture
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1990
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Mimarlık Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışma kapsamı içinde ele alınan araştırmanın konusu, alçı malzeme ve alçıdan elemanların yapıda kullanımı ile bu elemanların teknik ve ekonomik yönden değerlendirilmesidir. Başlangıçta; alçının tanımı, çeşi t ler i, -f i z iksel ve kimyasal özel 1 ikler i, yurt iç i ve yurtdışı hammadde kaynakları, üret im yöntemleri gibi hususlar an lat ı İmiş, daha sonra alçının malzeme ve eleman olarak yapıda kullanımı incelenmiştir. Son bölümde alçı yapı ürünlerinin özellikleri ve yapıya getireceği yararlılıklar teknik yönden değerlendirilmiş, alçı duvar elemanının diğer duvar elemanları ile maliyet yönünden bir karşılaştırması yapılmıştır. Çalışma sonunda, ülkemizde hammaddesi bol bulunan alçıdan üretilen yapı elemanlarının, geleneksel yapı elemanlarının birçoğuna göre, yapının kullanım amacına bağlı olarak teknik yönden ve maliyet açısından daha kullanılabilir olacağı ve ülkemiz inşaat sektöründe daha -fazla uygulama alanı bulabileceği görülmüştür. II
Özet (Çeviri)
The scope of this study focuses on the application of gypsum and gypsum components in the buildings and the evaluation of the components from the technical and economical point of view. In the first part of the study, the description, types, physical and chemical properties, domestic and foreign raw material sources and production techniques of the gypsum are stated. Then, the application of gypsum and gypsum components in the buildings are studied. In the last part, the properties of gypsum structures and their advantages are evaluated on technical grounds; the costs of gypsum plasterboards and other types of boards are compared. The main result derived from this study is that, the structure components made of gypsum which has plenty of raw material in Turkey, are more advantageous in terms of cost and technical characteristics depending on the use of the structures and compared to the most of conventional wall components, and could be more widely employed in the field of Turkish construction sector. Ill
Benzer Tezler
- Erken Osmanlı mimarisinde taş süsleme (2 cilt)
The Stone decoration in early Ottoman architecture
YILDIRAY ÖZBEK
Doktora
Türkçe
1999
El SanatlarıHacettepe ÜniversitesiSanat Tarihi Ana Bilim Dalı
PROF.DR. FİLİZ YENİŞEHİRLİOĞLU
- Ahşap ve alçı süslemeciliğinde Çelebi Mehmed dönemi süsleme repertuarı
The Ornamental repertoire on wood and stucco decoration during the age of Çelebi Mehmed
ALP SUAT
Yüksek Lisans
Türkçe
1995
ArkeolojiHacettepe ÜniversitesiArkeoloji ve Sanat Tarihi Ana Bilim Dalı
PROF. DR. FİLİZ YENİŞEHİRLİOĞLU
- Alçı köpürtme teknikleri
Foamed gypsum techniques
BASRİ ASLAN
Yüksek Lisans
Türkçe
1997
Mimarlıkİstanbul Teknik ÜniversitesiYapı Bilgisi Ana Bilim Dalı
PROF. DR. EROL GÜRDAL
- Alçı ve alçının yapıda uygulanması
Gypsum and application of gypsum in the construction
FUNDA BAHAR ÜLKER
Yüksek Lisans
Türkçe
1996
MimarlıkMimar Sinan Güzel Sanatlar Üniversitesiİç Mimarlık Ana Sanat Dalı
DOÇ. DR. NURAN YENER
- Kireç harç ve sıvaların fiziksel ve mekanik özelliklerinin iyileştirilmesi
Improving physical and mechanical properties of lime mortars and plasters
ÖZLEM MAVİ