Cfd analysis of the aerodynamic effects of a gurney flap on a smallscale horizontal axis wind turbine with a low reynolds number
Başlık çevirisi mevcut değil.
- Tez No: 852562
- Danışmanlar: DR. ELDAD AVİTAL
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: İngilizce
- Üniversite: Queen Mary Unıversıty Of London
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
CFD analysis was used to investigate and optimize the effect of a Gurney flap on a low Reynolds aerofoil, the Eppler E387, to improve the performance of small-scale wind turbines. 2D Unsteady RANS simulations were employed with ANSYS to investigate the affect of the Gurney flap. Validation process was successfully taken place on the E387 aerofoil without a Gurney Flap before investing the effect of Gurney Flaps with heights, in percentage of the aerofoil chord length, 1c%, 1.5c%, 2c% and 3c%. This lead to the discovery the lift was enhanced with increasing Gurney flap height due to the distinctive counter rotating vortices formed by the Gurney flap. However, at high AoA the drag penalties become more severe which leads to an earlier stall. Once flow fields of each Gurney flap height were analysed, the optimum CL/CD ratios of each Gurney flap setting was used to calculate the optimum tip speed ratio and the coefficient of power with single rotor calculations assuming linear aerodynamics.
Özet (Çeviri)
Özet çevirisi mevcut değil.
Benzer Tezler
- A detailed assessment of the effects of 3D radial stacking on the aerodynamic performance of NASA Stage 37 rotor blade
NASA Kademe 37 rotor kanatlarının aerodinamik performansı üzerine 3 boyutlu radyal istifleme etkilerinin ayrıntılı incelenmesi
FURKAN ÜLGER
Yüksek Lisans
İngilizce
2024
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERTAÇ ÇADIRCI
- Eksenel kompresörlerde oluk genişliği ve en-boy oranının aerodinamik performansa etkisinin HAD ile analizi
CFD-based analysis of casing groove width and aspect ratio effects on axial compressor aerodynamic performance
KEREM ÖZÇELİK
Yüksek Lisans
Türkçe
2025
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. LEVENT ALİ KAVURMACIOĞLU
- Kanal içerisinde rüzgar türbini tasarımı ve had analizi ile kanal profilinin türbin performansına etkilerinin incelenmesi
Ducted wind turbine design and investigation of the effects of duct profile to the design with cfd analysis
YİĞİTCAN GÜLSOY
Yüksek Lisans
Türkçe
2018
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ LEVENT ALİ KAVURMACIOĞLU
- Multi-objective optimization to increase the performance of a toroidal propeller
Toroidal bir pervanenin performansının artırılması için çok amaçlı optimizasyon
ÖMER ÇİFTÇİ
Yüksek Lisans
İngilizce
2025
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERTAÇ ÇADIRCI
- Yarı römorklarda yapısal eklenti tasarımları ve aerodinamik etkilerinin analizi
Additional structural designs and analysis of aerodynamic effects in semi-trailer
FAKI BİNBOĞA
Yüksek Lisans
Türkçe
2025
Otomotiv MühendisliğiKocaeli ÜniversitesiOtomotiv Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ ÇINAR