Experimental and numerical study on determination of macroscopic thermal properties of 3d lattice metal frame for heat transfer enhancement
Başlık çevirisi mevcut değil.
- Tez No: 799788
- Danışmanlar: PROF. DR. MOGHTADA MOBEDİ
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: İngilizce
- Üniversite: Shızuoka Unıversıty
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Nowadays, many researches pay a huge attention to heat enhancement in an innovative way. Therefore, various methods have been investigated in literature such as the use of metal non-particles or metal foam. In this study, heat transfer analysis of 3D Lattice Metal Frame (LMF) is done both numerically and experimentally. A detailed literature survey has been done on the reported studies in the literature to discover what has been down so far. A sample (cubic 3D LMF) is manufactured by 3D Metal Printer Technology and thermal analysis inside the 3D LMF is done both theoretically and experimentally. The pore scale governing equations are solved and the values of permeability, inertia coefficient, interfacial heat transfer coefficient, longitudinal and transverse thermal dispersion are calculated. Then by using those values, the volume averaged solid and liquid temperatures are obtained by using COMSOL software. An experimental set up is established and the solid and fluid temperatures also obtained experimentally. The results of the volume averaged equations and experimental study are compared and good agreement between them is observed. Thermography technology is used to measure solid temperature of the 3D LMF. The study is done for Re = 72.75 and 3D LMF with 0.946 porosity successfully.
Benzer Tezler
- An experimental and numerical study on effects of pore to throat size ratio on macroscopic transport parameters in porous media
Gözenekli yapılarda gözenek ile boğaz arasındaki büyüklük oranının makroskopik taşınım parametrelerine etkisi üzerine deneysel ve teorik bir çalışma
TÜRKÜLER ÖZGÜMÜŞ
Doktora
İngilizce
2015
Makine Mühendisliğiİzmir Yüksek Teknoloji EnstitüsüMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MOGHTADA MOBEDİ
YRD. DOÇ. DR. ÜNVER ÖZKOL
- Numerical study on determination of thermal dispersion conductivity of metal foams
Metal köpüklerde ısıl dispersiyon ı̇letkenlı̇ğı̇nı̇n sayısal olarak belı̇rlenmesı̇
AYLAR ARANI FARD
Yüksek Lisans
İngilizce
2023
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA ÖZDEMİR
- Tel örgü katmanlardan oluşan gözenekli ortamda zorlanmış ısı geçişi
Başlık çevirisi yok
MUSTAFA ÖZDEMİR
- Agrega-çimento hamuru arayüzeyi mikroyapısının yüksek mukavemetli betonların kırılma parametrelerine etkisi
Effect of aggregate-cement paste interface microstructure on the fracture parameters of high strength concretes
CANAN TAŞDEMİR
- 150<A<170 bölgesinde yer alan çift-çift psödo ayna çekirdeklerde manyetik dipol uyarılma özelliklerinin incelenmesi
Investigation of magnetic dipole excitations in even-even pseudo-mirror nuclei in the 150<A<170
AINUR UTARSHAYEVA
Yüksek Lisans
Türkçe
2025
Fizik ve Fizik MühendisliğiSakarya ÜniversitesiFizik Ana Bilim Dalı
DR. ÖĞR. ÜYESİ NİLÜFER DEMİRCİ SAYGI