Baryum floborat sentezi, karakterizasyonu ve uygulanabilirliğinin araştırılması
Research of barium floroborate synthesis, characterization and applicability
- Tez No: 796239
- Danışmanlar: PROF. DR. FATİH AKKURT
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Gelişen teknoloji ile birlikte geniş kullanım alanına sahip bor bileşikleri endüstrinin vazgeçilmez ürünlerinden biri olmuştur. Elenmentel bor, boranlar, bor hidrür, boratlar ve floroboratlar özel bor ürünlerinden en yaygın olarak kullanılanlardır. Özellikle floroboratlar endüstride birçok alanda kullanılmaktadır. Bu çalışmada baryum floroborat öncelikle mekanokimyasal yöntem ile sentezlenmiş olup takibinde yaş yöntem uygulanarak elde edilmiştir. Birinci yöntemde elementel bor ve baryum florürden değişen mol oranlarında numuneler hazırlanmış ve bilyeli değirmende 2000 dakika boyunca mekanokimyasal işleme tabi tutulmuştur. İşlem sonucunda optimum reaktant mol oranı belirlenmiştir. Değişen sürelerde deneylere devam edilmiş ve optimum süre belirlenmiştir. Yapılan deneyler sonucunda optimum mol oranı (nB/nBaF2) 0,85, optimum süre 2000 dakika ve optimum şartlardaki verim ise %61,24 olarak bulunmuştur. Diğer sentez yöntemi olan yaş yöntem metodunda ise reaktant olarak floroborikasit ve baryum peroksit kullanılmıştır. Optimum reaktant mol oranı, süre ve sıcaklık belirlenmiştir. Optimum mol oranı (nHBF4/nBaO2) 1:3, optimum sıcaklık 60℃ ve süre 120 dakika olarak tespit edilmiştir. Optimum verim %98,05 olarak hesaplanmıştır. Sentezlenen baryum floroborat numunelerinin FT-IR, partikül boyut ölçümleri, XRD ve TGA analizleri ile karakterizasyon işlemleri gerçekleştirilmiştir. Çalışmanın son aşamasında yaş yöntem ile sentezlenen baryum floroboratın pamuklu kumaşlara uygulanabilirliğine yönelik parametreler (daldırma sıcaklığı, süresi ve çözelti konsantrasyonu) incelenmiştir. Baryum floroborat ile işlem görmüş kumaşlara uygulanan FT-IR analizi neticesinde baryum floroborat molekülleri ile selüloz arasında etkileşim olduğu görülmüştür. Bunlara ilave olarak, alev geciktirici özelliğinin incelenmesi için LOI testleri yapılmıştır. LOI test sonucuna göre baryum floroboratın etkin bir alev geciktirici olduğu tespit edilmiştir.
Özet (Çeviri)
Boron compounds with a wide range of uses combined with evolving technology have become one of the industry's most essential products. Elemental boron, boranes, boron hydride, borates and fluoroborates are the most commonly used products from special boron products. Especially fluoroborates are used in many areas in the industry. In this study, barium fluoroborate was synthesized primarily by mechanochemical method and followed by wet method. In the first method, samples were prepared at varying mole rate from elemental boron and barium fluoride and mechanochemical processing was carried out at the ball mill for 2000 minutes. As a result of the process, the optimum reactant mole ratio was determined. Experiments have been continued at varying times and optimum time has been determined. The optimum mole ratio (nB/nBaF2) was 0.85, the optimal time was 2000 minutes and the efficiency in optimal conditions is 61.24% as a result of the experiments. In the wet method, which is the other synthesis method, fluoroboric acid and barium peroxide were used as reactants. The optimum reactant mole ratio, time and temperature are specified. The optimum molar ratio (nHBF4/nBaO2) was found to be 1:3, optimum temperature 60℃ and time 120 minutes. the optimal yield is calculated as 98.05% . Characterization of the synthesized barium fluoroborate samples were carried out with FT-IR, particle size measurements, XRD and TGA analyses. It was observed that there was an interaction between barium fluoroborate molecules and cellulose as a result of FTIR analysis applied to fabrics treated with barium fluoroborate. In the last stage of the study, the parameters for applying on cotton fabrics to barium fluoroborate synthesized by the wet method (immersion temperature, time and solution concentration) have been examined. In addition, LOI tests were performed to examine the flame retardant property. According to the LOI test result, the barium fluoroborate was found to be an effective flame retardant.
Benzer Tezler
- Baryum tartarat'ın x ışınları kırınımı ile kristal yapının incelenmesi ve böbrek taşlarının nitel analizi
Investigation of crystal structure of barium tartarate by x ray diffraction and qualitative analysis of kidney stones
İBRAHİM SAVCI
Yüksek Lisans
Türkçe
1998
Fizik ve Fizik MühendisliğiErciyes ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. MEHMET AKKURT
- X-ışınları yöntemi ile böbrek taşları, baryum tartarat ve bazı maden filizlerinin analizi
The X-ray analiysis of kidney stones, barium tartarete and some hining
MEHMET TAMER
Yüksek Lisans
Türkçe
1999
Fizik ve Fizik MühendisliğiGazi ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. KEMAL ÇOLAKOĞLU
- Baryum titanatın mikroyapısına stokiometrinin ve SiO2 katkısının etkisi
The effect of stoichiometry and SiO2 addition on the microstructure of barium titanate
BERAT YÜKSEL
Yüksek Lisans
Türkçe
2003
Metalurji Mühendisliğiİstanbul ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. TEVFİK OSMAN ÖZKAN
- Baryum sülfat kristalizasyonuna polimerlerin etkisi
The effectiveness of polymers on barium sulphate crystallization
SEVİL TOK
Yüksek Lisans
Türkçe
2004
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF.DR. MUALLA ÖNER