Geri Dön

Investigation of the effect of taking together shear and bending deformations of reinforced concrete shear walls in high-rise buildings under horizontal loads

Başlık çevirisi mevcut değil.

  1. Tez No: 796134
  2. Yazar: NABIL KASSEM AGHA
  3. Danışmanlar: PROF. DR. ZEKİ HASGÜR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Deprem Mühendisliği, İnşaat Mühendisliği, Earthquake Engineering, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: İngilizce
  9. Üniversite: Altınbaş Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Özet yok.

Özet (Çeviri)

Natural hazards are considered primary concerns in engineering. Earthquakes' effects are crucial to take into consideration when designing. They cause ground motion under the structures. The buildings therefore vibrate under inertia loads causing excessive stresses on the structural components which result in collapses. High-rise buildings are subjected to a more critical acceleration because of its increased height. Normally, shear walls are provided to tolerate lateral loads and maintain a stiff-rigid system. In this thesis, using response spectrum dynamic analysis method and Erzincan's 1992 N – S spectra, 2 cases of a 20-storey high- rise office building are studied and analyzed to investigate the effect of taking both bending and shear deformations in reinforced concrete shear walls under horizontal loads. There will be 2 types of shear walls under study: frame shear wall and core wall. The analytical results show that there is a slight reduction percentage in a set of parameters such as periods, maximum core moments, frame shear wall moments, and deflections.

Benzer Tezler

  1. Investigation of the effect of taking together shear and bending deformations of reinforced concrete shear walls in high-rise buildings under horizontal loads

    Birlikte almanın etkisinin araştırılması takviyeli kesme ve bükme deformasyonları yüksek binalarda beton kesme duvarları yatay yükler altında

    SAFA ABDULKAREEM MOHAMMED AL-DULAIMI

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    İnşaat MühendisliğiAltınbaş Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ZEKİ HASGÜR

  2. LP sargılı beton için önerilmiş olan dayanım ve şekil değiştirme modellerinin farklı boyutlar üzerindeki performanslarının incelenmesi

    Investigation of the performance of proposed models of strength and strain for frp wrapped concrete on different sizes

    ALPER TURGUT

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ALPER İLKİ

  3. Yapı sistemlerinin hesap yöntemlerinin karşılaştırılması gelişigüzel kesitlerin bileşik eğilmeye göre ekonomik hesabı

    Comparison of methods of structural analysis economical design of irregular shaped reinforced concrete sections with bending moments and axial loads

    TUNCAY KAYA

    Yüksek Lisans

    Türkçe

    Türkçe

    1991

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. H. FARUK KARADOĞAN

  4. Static and dynamic analyses of composite helicoidal rods with mixed finite element method

    Kompozit helisel çubukların karışık sonlu elemanlarla statik ve dinamik analizi

    ÜMİT NECMETTİN ARIBAŞ

    Doktora

    İngilizce

    İngilizce

    2019

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET HAKKI OMURTAG

  5. Derin kazılarda yatay jet grout uygulamasının sonlu elemanlar yöntemi ile incelenmesi

    Investigation of horizontal jet grout application in deep excavations by finite element method

    MEHMET TARAKÇI

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. BERRAK TEYMÜR