Geri Dön

Investigation of mechanical, tribological and biological properties of short carbon fiber/ nano hydroxyapatite reinforced hybrid composites

Kırpılmış karbon elyaf/nano hidroksiapatit takviyeli hibrit kompozitlerin mekanik, tribolojik ve biyolojik özelliklerinin incelenmesi

  1. Tez No: 790972
  2. Yazar: IMAN FOUAD MUNAF ALJEWARI
  3. Danışmanlar: DOÇ. DR. ERKAN KOÇ, DR. ÖĞR. ÜYESİ YASİN AKGÜL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Mühendislik Bilimleri, Engineering Sciences
  6. Anahtar Kelimeler: Biyomalzemeler, Karbon lifler, Mekanik özellikler, Poliesterler, Biomaterials, Carbon fibers, Mechanical properties, Polyesters
  7. Yıl: 2023
  8. Dil: İngilizce
  9. Üniversite: Karabük Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: Biyomedikal Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu tezin amacı, kısa karbon elyaf (SCF) nanohidroksiapatit (nHA) ile güçlendirilmiş hibrid epoksi kompozitlerinin mekanik, tribolojik ve biyolojik özelliklerini incelemektir. İyi mekanik, tribolojik ve biyouyumluluğa sahip önerilen E/SCF-nHA hibrid kompozitler, ortopedik uygulamalarda gerekli sabitleme plakalarını üretmek için kullanılabilecek kompozit yapılar için önerilmektedir. Bu çalışmada, SCF ve nHA ile çeşitli oranlarda güçlendirilmiş tek katmanlı hibrid kompozitler ve saf epoksi (E) ve epoksi karbon elyaf kompozitler, el yatırması yöntemiyle oluşturulmuştur. Numuneler üzerinde (E, E-3CF, E-5CF, E-10CF, E-10CF-1nHA, E-10CF-3nHA ve E-10CF-5nHA) mekanik özelliklerini incelemek için çekme testleri, 3 noktalı bükme testleri ve Izod darbe testleri yapılmıştır. tribolojik özellikleri, 20 ve 40 N yüklerle gerçekleştirilen aşınma testinde kanıtlanmıştır. Ayrıca, hibrid kompozit numunelerin biyolojik özellikleri simüle edilmiş vücut sıvısında (SBF) incelenmiştir. Üstelik numunelerdeki çatlak ve aşınmış yüzeylerin morfolojisini incelemek için bir tarama elektron mikroskop (SEM) kullanılmıştır. Tez sonuçları, mekanik özelliklerin çekme, eğime ve darbe gücü açısından kısa karbon fiberinin eklenmesiyle geliştirildiğini ve nanohidroksiapatit eklenmesiyle biyolojik özelliklerin de iyileştirildiğini gösterdi. Buna göre, %10 karbon fiber (CF) ve %3 nanohidroksiyapatit (nHA) (E-10CF-3nHA) hibrid kompozitin yürütülen tüm testlerde en iyi sonuçları elde ettiğini gösterir.

Özet (Çeviri)

This thesis aims to investigate the mechanical, tribological, and biological characteristics of hybrid epoxy composites reinforced with nanohydroxyapatite (nHA) and short carbon fiber (SCF). The proposed E/SCFs-nHA hybrid composites are intended to be recommended for composite structures that can be used to manufacture fixation plates required in orthopedic applications due to their favorable mechanical, tribological, and biocompatibility properties. In this study, single-layer hybrid composites reinforced with SCFs and nHA in varying ratios, as well as pure epoxy (E) and epoxy-carbon fiber composites, were all created by hand lay-up method. Tensile tests, 3-point bending tests, and Izod impact tests were performed on samples (E, E-3CF, E-5CF, E-10CF, E-10CF-1nHA, E-10CF-3nHA, and E-10CF-5nHA) to investigate their mechanical characteristics. The tribological characteristics were demonstrated by the wear test, which was carried out with 20 and 40 N loads. Moreover, the hybrid composite samples were tested for their biological properties in a medium designed to mimic bodily fluid (SBF). Additionally, the morphology of worn and cracked surfaces was analyzed using a scanning electron microscope (SEM). Mechanical properties, such as tensile, flexural, and impact strengths, were found to be improved by the inclusion of short carbon fiber, and biological properties were found to be enhanced by the inclusion of nanohydroxyapatite, according to the results of the thesis. Consequently, the hybrid composite of 10% carbon fiber (CF) and 3% nanohydroxyapatite (nHA) (E-10CF-3nHA) performed the best in all tests.

Benzer Tezler

  1. Ulaş Sağlık Ocağı merkezinde nüfusun bazı niteliklerine ve konutların durumuna ilişkin bir çalışma

    An Investigation carried out at the Ulaş Public Health Centre concerning some characteristics of the population and housing conditions in the district of Ulaş

    EROL ŞANLI

    Doktora

    Türkçe

    Türkçe

    1985

    Halk SağlığıCumhuriyet Üniversitesi

    Halk Sağlığı Ana Bilim Dalı

    DOÇ. DR. SERVET ÖZGÜR

  2. Antakya tarihi ticaret merkezi mekansal yapı değişim ve gelişim sürecinin kent ticaret merkezi planlamasına etkinliği

    The Effectiveness of spatial structural chance and development period of the historical trade center of Antakya in the urban trade planning

    NEVİN TURGUT

    Yüksek Lisans

    Türkçe

    Türkçe

    1986

    Şehircilik ve Bölge PlanlamaGazi Üniversitesi

    Şehir ve Bölge Planlama Ana Bilim Dalı

    YRD. DOÇ. DR. NURCAN UYDAŞ

  3. Pik demiri ve karbon çeliğinin sulu çözeltiler içindeki korozyon hızının tayini

    Determination of the rate of corrosion of the cast iran and carbon steel in the aqueous solutions

    EMİNE NAZAN ÜNAL

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    Kimya MühendisliğiGazi Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HAYRİ YALÇIN

  4. Sivas yöresinde akraba evliliği yapan ve yapmayan çiftlerde dermatoglifik benzerlikler

    Similarities of dermataoglyphies among individval of married relatives and married couples not related to each other in Sivas region

    Y. SELMA SÜNGÜ

    Yüksek Lisans

    Türkçe

    Türkçe

    1984

    Tıbbi BiyolojiCumhuriyet Üniversitesi

    Tıbbi Biyoloji ve Genetik Ana Bilim Dalı

    YRD. DOÇ. DR. İLHAN SEZGİN