Spare part warehousing
Yedek parça depolaması
- Tez No: 78282
- Danışmanlar: DOÇ. DR. MUSTAFA ÖZBAYRAK
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Depolama, Yedek parçalar, Storage, Spare parts
- Yıl: 1998
- Dil: İngilizce
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet Bu tezin amacı, otomatik üretim sistemlerinde, otomatik yükleme ve boşaltma sistemleri (OY/BS) tasarımı üzerinde çalışmaktır. OY/BS simülasyon tekniği kullanılarak tasarlanmıştır. Modellemede kullanılan araç daha esnek ve daha kolaylıkla bulunabilir yüksek seviyeli dil olan Turbo-Pascal' dır (Borland). Bilgisayar programı tarafından simüle edilen sistem tek tip parça ve boyutlarına göre farklı iki tip hücreden oluşmaktadır. Ayrıca, çalışmada OY/B sistemlerinin tek ve çift sinyal tipleri karşılaştırılmıştır. Çalışmada, ayrıca otomatik yönlendirilen araçların, robotların ve toplama/boşaltma istasyonlarının performansları sunulmuştur.. Bu sebepten ötürü, sistem performansım ölçümünde kullanılmak üzere bir grup performans kriteri kullanılmıştır.. Bir çok faktör depo performans grafiğininin geçici fazını tanımlamakta kullanılmıştır. Bütün bu çalışmalar bu tezin ilgili bölümlerinde sunulmuştur. III
Özet (Çeviri)
Abstract The objective of this thesis is to study the design of Automatic Storage and Retrieval System (AS/RS) in the automated manufacturing systems. The AS/RS is designed by using the simulation technique. The tool used in modelling, is a relatively flexible and easily available high level computer language which is Turbo-Pascal (Borland). The system simulated by computer code, contains l type part, 2 type celi with respect to space dimensions. Also, the study presents the comparison of single and dual command types of AS/R systems. Moreover, study is to present performance of the AGV's, robots and pick up/deposit stations. For this reason a set of performance criteria has been used to measure.the system performance. - Several factors are used to determine the transient phase of warehouse performance graph. Ali these studies are presented in relative sections of this thesis. II
Benzer Tezler
- Taşımacılık modelleri, uluslararası taşımacılık konusuna yaklaşımlar ve bir uygulama
Transportation models, approaches to international transportation and an application
BAHAR ORTAATİLLA
Yüksek Lisans
Türkçe
1994
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiDOÇ.DR. FÜSUN ÜLENGİN
- Lojistik yönetiminde dağıtım kanalları yoluyla sağlanacak müşteri memnuniyetinin, işletmenin pazar payına etkisi ve ısıtma sektöründeki bir uygulaması
Customer satisfaction which is in the lojistics management improved by distribution channels effect to the firms market share and application in the heat sector
TUĞRUL MENEMENCİOĞLU
Yüksek Lisans
Türkçe
1999
Endüstri ve Endüstri MühendisliğiYıldız Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. SEMİH ÖNÜT
- İmalat kaynakları planlaması
Manufacturing resources planning
SAADET YILDIZ
Yüksek Lisans
Türkçe
1992
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiPROF. DR. AHMET FAHRİ ÖZOK
- Kıyaslama
Benchmarking
AKIN ALIKÇIOĞLU
Yüksek Lisans
Türkçe
1997
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. FÜSUN ÜLENGİN