Cost comparison between three multistorey structural systems
Çok katlı üç yapı sisteminin maliyet kıyaslaması
- Tez No: 76526
- Danışmanlar: PROF. DR. VEDAT YERLİCİ
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Maliyet analizi, Perde çerçeve sistemleri, Yapı sistemleri, Yüksek yapılar, Cost analysis, Shear wall frame systems, Structure systems, High structures
- Yıl: 1998
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Yapılan bu çalışma, 12 katlı bir binanın, çerçeve, perde-çerçeve ve perdeli sistem kullanılması durumunda ortaya çıkan maliyetlerinin kıyaslamasını sunmaktadır. Yapısal analizler yürütülüp, her bir sistemin maliyetleri karşılaştırmalı olarak elde edilmiştir. İlk olarak, maliyet ile en uygun yapı sistemi seçimi arasındaki ilişki gösterilirken, yapısal sistemler hakkında da genel bir bilgi aktarılmıştır. Ayrıca, bu çalışmada kullanılmış olan sistemlere ilişkin detaylı bir bilgi verilmiştir. Üçüncü bölümde, planlama ve tasarım konusunda genel bir bilgi sunulmuş ve örnek binaların ön tasarım aşamaları ve tanıtımı yapılmıştır. Ayrıca, binaların yatay deplasman kriterlerine göre performanslarının yeterliliği gösterilmiştir. Ön tasarım çalışmalarından sonra, yapısal analizler tanımlanmış ve her bir binanın metraj hesabı için malzemelerin miktarları bulunmuştur. Sistemlerin gözlenen davranışları, maliyet üzerindeki etkileri vurgulanarak tartışılmıştır. Örnek binaların karşılaştırmalı olarak maliyet analizleri sunulmuş, sonuç olarak perde çerçeveli sistemin en ekonomik çözüm olduğu ve bu sonucu özellikle donatı demiri kullanımı farkından ortaya çıktığı bulunmuştur.
Özet (Çeviri)
The study presents a cost comparison for a 12 storey building made of three different structural systems. Namely moment resisting frame, shear wall-frame and shear wall systems. The structural analyses are carried out for each system and comparative costs are determined. First, a general overview is given about the structural systems while indicating the relationship of the cost and the proper selection of a system. Then the three systems used in the study are discussed in detail. In the third chapter, general considerations for the planning and design have been presented, and the preliminary design steps for the example buildings have been performed while describing them in detail. After the preliminary design, structural analyses have been carried out, and then the amount of the materials have been found so as to get the bill of quantities of each building. Also the satisfactory performance of the example buildings for lateral deflection criteria has been checked. The observed behaviour of the systems have been discussed, while emphasizing its impact on the cost. The comparative cost analyses of example buildings have been illustrated. As a result the shear wall-frame system is found to be the most economical solution, which is caused mainly by the difference between the costs of reinforcing steel quantities.
Benzer Tezler
- Çok katlı çelik bir yapının elastik ve plastik yöntemlerle çözümlerinin karşılaştırılması
Başlık çevirisi yok
ZAFER METEŞEOĞLU
- Çok katlı çelik yapılarında döşeme türü kararı etkenleri
Başlık çevirisi yok
ZİYA YAMAÇ
Yüksek Lisans
Türkçe
1998
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. BİLGE IŞIK
- Çok katlı yapılarda tünel kalıp uygulaması ve bu yapıların projelendirilmesi
The Tunnel form application on the multi-storey buildings and the design of these structures
HAKAN ŞİMŞEK
- Çok katlı bir yapının betonarme ve kompozit çözümlerin yapı maliyeti ve ağırlığı yönünden karşılaştırılması
The Comparision of multistorey building with concrete and composite solutions
FİKRET İMIK
- Giydirme cephe çift cam ünitelerinde rasyonel boyut seçimi
Selection of rational sizes for double glazing units in curtaion walls
NECMETTİN MURAT AYGÜN