Modeling of concrete fracture
Betonda çatlak ve hasar modellenmesi
- Tez No: 76430
- Danışmanlar: PROF. DR. CENGİZ KARAKOÇ
- Tez Türü: Doktora
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Beton dayanımı, Hasar analizi, Sonlu elemanlar yöntemi, Çatlak, İzotropik yapılar, Concrete strength, Damage analysis, Finite element method, Crack, Isotropic structures
- Yıl: 1998
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada, deneysel veriler ve diğer aratırmacıların çalışmaları temel alınarak, yeni bir izotropik hasar modeli geliştirilmiştir. Yeni bir hasar fonksiyonu ve kriteri tanımlanmış ve geliştirilen modelden yararlanarak betonun kırılma enerjisi Gf için yeni bir bağıntı türetilmiştir. Deneysel çalışmanın ilk kısmımda maksimimum agrega çapı (dmax=8, 12. 16,25,32 mm) alınarak betonun çekme modundaki kırılma enerjisi değeri RILEM standartlarına uygun olarak Yıldız Teknik Üniversitesi Yapı Laboratuvarında ölçülmüştür. Betonun çekme ve kesme modlarının birlikte etkin oldukları durum için kırılma enerjisi değeri maksimum agrega çapı 8,16 ve 32 mm için belirlenmiştir. Maksimum agrega çapı ile beton için kullanılan sonlu eleman ağı arasındaki ilişki araştınlımıştır. Geliştirilen hasar modeli yardımıyla, beton basınç prizması, etriyeli ve etriyesiz betonarme kirişler, betonarme paneller, çekme-kesme numuneleri ve kesme çatlaklı kirişler, sonlu elemanlar yardımıyla incelenmiştir. Sonuçta, modelin geniş bir uygulama sahası olduğu yapılan sonlu eleman uygulamaları ile gösterilmiştir.
Özet (Çeviri)
Based on the experimental results and the various reports in the literature, a isotropic damage mode! has been developed for concrete in this thesis. A new damage criterion is defined suitable for concrete, and a new relation of the fracture energy of concrete under tensile stresses is developed on the basis of the developed damage model. The first part of the experimental work consists of the measurement of the fracture energy of concrete mixes with different maximum aggregate size (dmax=8, 12, 16,25,32 mm). In the second part of the experimental work, the mixed mode specimens of concrete are used to predict the fracture energy of the shear mode in an indirect way. By changing the maximum aggregate size to 8, 16, 32 mm, the effect of the maximum aggregate size on the mixed mode fracture energy is examined throughout the study. A concrete prism, reinforced concrete beams with and without stirrups, concrete panels, specimens of mixed mode fracture of concrete and shear critical beams are examined by the new damage model throughout the finite element analysis. Finally, it can be stated that the validity of the theoiy and the analysis have been verified to large extent.
Benzer Tezler
- Çentikli beton kirişlerde mod I durumunda kırılma parametrelerinin belirlenmesi
Determination of fracture parameters at the notched concrete beams
MEHMET KIZILASLAN
Yüksek Lisans
Türkçe
1997
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. SAİM AKYÜZ
- Betonarme yapı elemanlarında basınç-kesme kırılmasının ve boyut etkisinin deneysel ve nümerik olarak incelenmesi
Experimental and numerical investigation of compression shear fracture and size effect of reinforced concrete structural elements
RAGIP İNCE
Doktora
Türkçe
1998
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ABDUSSAMET ARSLAN
- Betonun kırılma yörüngesinin tespitinde genetik algoritma optimizasyonu
Genetic algorithms optimization in determination the crack patterns of concrete
MEHMET DEMİRPOLAT
Yüksek Lisans
Türkçe
1997
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ABDUSSAMET ARSLAN
- Agrega konsantrasyonunun betonun mekanik özelliklerine etkisi
Influence of aggregate volume concentration on the mechanical properties of concrete
HASAN YILDIRIM
- Agrega-çimento hamuru arayüzeyi mikroyapısının yüksek mukavemetli betonların kırılma parametrelerine etkisi
Effect of aggregate-cement paste interface microstructure on the fracture parameters of high strength concretes
CANAN TAŞDEMİR