Karbon nanofiber temelli kompozitlere dayalı elektrokimyasal aptasensörlerin geliştirilmesi ve uygulamaları
Development and applications of electrochemical aptasensors based on carbon nanofiber composites
- Tez No: 761617
- Danışmanlar: PROF. DR. KADRİYE ARZUM ERDEM GÜRSAN
- Tez Türü: Yüksek Lisans
- Konular: Mühendislik Bilimleri, Biyoteknoloji, Kimya, Engineering Sciences, Biotechnology, Chemistry
- Anahtar Kelimeler: Aptasensörler, Elektrokimyasal empedans spektroskopisi, Nanolif, Protein C, İyonik sıvılar, Aptasensors, Electrochemical impedance spectroscopy, Nanofiber, Protein C, Ionic liquids
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Malzeme Bilimi ve Mühendisliği Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Çalışmamızda öncelikle karbon nanomalzeme temelli tek kullanımlık kalem grafit elektrotlar (PGE) geliştirilip ve optimize edilerek, ardından aktive edilmiş protein C (APC)'ye hedefli DNA aptameri ile APC'nin etkileşimine dayalı elektrokimyasal aptasensör geliştirildi. Bu kapsamda, kalem grafit elektrot yüzeyleri karbon nanofiber (CNF) ve iyonik sıvı (IL) nanokompoziti ile modifiye edilerek CNF-IL modifiye edilmiş tek kullanımlık grafit elektrotlar (CNF-IL/PGE) hazırlandı. CNF-IL/PGE elektrotların mikroskobik ve elektrokimyasal karakterizasyonuna yönelik deneyler gerçekleştirildi. Tez çalışmamızda, APC'ye spesifik DNA aptamer (DNA-Apt) kullanılarak APC-aptamer ile etkileşimi çözelti fazında gerçekleştirildi. APC'nin elektrokimyasal tayininde CNF-IL/PGE elektrotlar ile elektrokimyasal empedans spektroskopisi (EIS) yöntemi kullanıldı. Böylece, APC'yi spesifik ve duyarlı bir şekilde algılayacak aptamerlere dayalı bir yöntem karbon nanomalzeme temelli elektrotlar kullanılarak geliştirildi. APC'ye spesifik DNA aptamerin hedefi olan APC ile etkileşiminin yanısıra aptamer-antidot çifti (AD22) ile APC etkileşimi geliştirilen CNF-IL/PGE kullanılarak impedimetrik yöntem ile araştırıldı. Aptamer ile etkileşimi sonrasında APC'nin hızlı, güvenilir ve seçimli şekilde impedimetrik tayinini mümkün kılacak CNF-IL temelli aptasensör teknolojisi ilk defa geliştirildi. Tez kapsamında elde edilen çıktılar benzer biyomoleküler etkileşimlerin hızlı ve güvenilir şekilde duyarlı ve seçimli tayinini mümkün kılacak yeni aptasensörlerin geliştirilmesine model olacaktır.
Özet (Çeviri)
In this study, carbon nanomaterial-based disposable pencil graphite electrodes (PGE) were firstly developed and optimized. Accordingly, these electrodes were applied for the detection of interaction of activated protein C (APC) with its DNA aptamer. In this context, CNF-IL modified disposable graphite electrodes (CNF-IL/PGE) were prepared by modifying the surface of pencil graphite electrode with carbon nanofiber (CNF) and ionic liquid (IL) nanocomposite. The experiments for microscopic and electrochemical characterization of CNF-IL/PGE electrodes were then carried out. In this study, interaction between APC and its aptamer was performed in solution phase using APC-specific DNA aptamer (DNA-Apt), and electrochemical impedance spectroscopy (EIS) method was used in combination with CNF-IL/PGE in order to monitor the detection of biointeraction. The interaction of APC with its DNA aptamer as well as the interaction of APC with aptamer-antidote pair (AD22) were performed in solution phase and then impedimetric detection was performed by using CNF-IL/PGE. CNF-IL-PGE was used for the first time in the literature to detect impedimetrically the interaction of APC with its DNA aptamer, which will enable rapid, reliable and selective determination of APC in solution phase. The results obtained within the scope of the study will be a model for the development of new aptasensors that will provide the rapid and reliable sensitive and selective detection of similar biomolecular interactions.
Benzer Tezler
- Biyo-kompozit tabanlı gaz sensörü algılama katmanının geliştirilmesi ve karakterize edilmesi
Development and characterization of bio-composite-based gas sensor detection layer
MERVE BAHAR OKUYUCU
Yüksek Lisans
Türkçe
2024
Kimya MühendisliğiMarmara ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ÖZGE AKAY SEFER
DR. ÖĞR. ÜYESİ GÖZDE KONUK EGE
- Multi scale nature of composite materials: Three case studies
Kompozit malzemelerin çok boyutlu doğası: Üç örnek durum çalışması
KAAN BİLGE
Yüksek Lisans
İngilizce
2012
Havacılık ve Uzay MühendisliğiSabancı ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. MELİH PAPİLA
- Hidrofobik dolgu içeren polimerik kompozitlerin uzun dönem su emme davranışlarının incelenmesi
Investigation of long-term water absorption behavior of polymer composites containing hydrophobic filler
NURTEN EKİN
Yüksek Lisans
Türkçe
2014
Kimya MühendisliğiAfyon Kocatepe ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MEHMET GALİP İÇDUYGU
- Investigation of CNT smart paint for structural health monitoring in advanced and nano-enhanced carbon fiber composites
Gelişmiş ve nano takviyeli kompozit malzemeler için karbon nanotüp içerikli akıllı boyanın yapısal sağlık izleme için geliştirilmesi
YAĞMUR ATEŞCAN
Yüksek Lisans
İngilizce
2015
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
YRD. DOÇ. HÜLYA CEBECİ
- Lityum iyon piller için üç boyutlu grafen/karbon nanotüp/silisyum nanokompozit anotların geliştirilmesi
Development of three-dimensional graphene/carbon nanotube/silicon nanocomposite anodes for lithium-ion batteries
SELİN DEMİRCİ
Doktora
Türkçe
2024
Enerjiİstanbul Teknik ÜniversitesiEnerji Bilimi ve Teknolojileri Ana Bilim Dalı
PROF. DR. NİLGÜN YAVUZ