Full 3d motion control forprogrammable bevel-tipsteerable needles
Başlık çevirisi mevcut değil.
- Tez No: 758962
- Danışmanlar: PROF. FERDİNANDO RODRİGUEZ Y BAENA
- Tez Türü: Doktora
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: İngilizce
- Üniversite: Imperıal College London
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Minimally invasive surgery has been in the focus of many researchers due to its reduced intra- and post-operative risks when compared to an equivalent open surgery approach. In the context of minimally invasive surgery, percutaneous intervention, and particularly, needle insertions, are of great importance in tumour-related therapy and diagnosis. However, needle and tissue deformation occurring during needle insertion often results in misplacement of the needles, which leads to complications, such as unsuccessful treatment and misdiagnosis. To this end, steerable needles have been proposed to compensate for placement errors by allowing curvilinear navigation. A particular type of steerable needle is the Programmable Bevel Tip Steerable Needle (PBN), which is a bio-inspired needle that consists of relatively soft and slender segments. Due to its flexibility and bevel-tip segments, it can navigate through three dimensional (3D) curvilinear paths. In PBNs, steering in a desired direction is performed by actuating particular PBN segments. Therefore, the pose of each segment is needed to ensure that the correct segment is actuated. To this end, in this thesis, proprioceptive sensing methods for PBNs were investigated. Two novel methods, an Electromagnetic (EM)-based tip pose estimation method and a Fibre Bragg Grating (FBG)-based full shape sensing method, were presented and evaluated. The error in position was observed to be less than 1.08 mm and 5.76 mm, with the proposed EM-based tip tracking and FBG-based shape reconstruction methods, respectively. Moreover, autonomous path-following controllers for PBNs were also investigated. A closed-loop, 3D path-following controller, which was closed via feedback from FBGinscribed Multi-core Fibres (MCFs) embedded within the needle, was presented. The 8 Nonlinear Guidance Law (NLGL), which is a well-known approach for path-following control of aerial vehicles, and Active Disturbance Rejection Control (ADRC), which is known for its robustness within hard-to-model environments, were chosen as the control methods. Both linear and nonlinear ADRC were investigated, and the approaches were validated in both ex vivo brain and phantom tissue, with some of the experiments involving moving targets. The tracking error in position was observed to be less than 6.56 mm
Benzer Tezler
- İnsansız hava aracı için bir borda bilgisayarının mimarisi ve tasarımı
Başlık çevirisi yok
SAİT N. YURT
Yüksek Lisans
Türkçe
1995
Astronomi ve Uzay Bilimleriİstanbul Teknik ÜniversitesiY.DOÇ.DR. T. BERAT KARYOT
- Yapı sistemlerinin karekteristik parametrelerinin tanımlanması
Identification of the characteristic parameters of structural systems
BARLAS ÖZDEN ÇAĞLAYAN
- Full-body motion control of a humanoid robot
İnsansı bir robotun tam vücut hareket kontrolü
ALİ FURKAN AKTAŞ
Yüksek Lisans
İngilizce
2021
Mekatronik MühendisliğiSabancı ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. KEMALETTİN ERBATUR
- Template-based and optimal control of dynamic quadrupedal gaits
Dinamik dört bacaklı yürüyüşlerin şablon tabanlı ve optimal kontrolü
MUSTAFA AKBABA
Yüksek Lisans
İngilizce
2025
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik ve Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA MERT ANKARALI
DOÇ. DR. ALİ EMRE TURGUT
- PID and LQR control of a planar head stabilization platform
PID ve LQR yontemleri ile tek eksenli kafa stabilizasyon platformu kontrolü
EMRE AKGÜL
Yüksek Lisans
İngilizce
2011
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. AFŞAR SARANLI