Computational cost reduction of robust controllersfor active magnetic bearing systems
Başlık çevirisi mevcut değil.
- Tez No: 715971
- Danışmanlar: DR. JERZY T. SAWİCKİ
- Tez Türü: Doktora
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: İngilizce
- Üniversite: Cleveland State Unıversıty
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
This work developed strategies for reducing the computational complexity of implementing robust controllers for active magnetic bearing (AMB) systems and investigated the use of a novel add-on controller for gyroscopic effect compensation to improve achievable performance with robust controllers. AMB systems are multi-input multi-output (MIMO) systems with many interacting mechanisms that needs to fulfill conflicting performance criteria. That is why robust control techniques are a perfect application for AMB systems as they provide systematic methods to address both robustness and performance objectives. However, robust control techniques generally result in high order controllers that require high-end control hardware for implementation. Such controllers are not desirable by industrial AMB vendors since their hardware is based on embedded systems with limited bandwidths. That is why the computational cost is a major obstacle towards industry adaptation of robust controllers. Two novel strategies are developed to reduce the computational complexity of singlerate robust controllers while preserving robust performance. The first strategy identifies a dual-rate configuration of the controller for implementation. The selection of the dualrate configuration uses the worst-case plant analysis and a novel approach that identifies the largest tolerable perturbations to the controller. The second strategy aims to redesign v the controller by identifying and removing negligible channels in the context of robust performance via the largest tolerable perturbations to the controller. The developed methods are demonstrated both in simulation and experiment using three different AMB systems, where significant computational savings are achieved without degrading the performance. To improve the achievable performance with robust controllers, a novel add-on controller is developed to compensate the gyroscopic effects in flexible rotor-AMB systems via modal feedback control. The compensation allows for relaxing the robustness requirements in the control problem formulation, potentially enabling better performance. The effectiveness of the developed add-on controller is demonstrated experimentally on two AMB systems with different rotor configurations. The effects of the presence of the add-on controller on the performance controller design is investigated for one of the AMB systems. Slight performance improvements are observed at the cost of increased power consumption and increased computational complexity.
Benzer Tezler
- New algorithms and techniques for microprocessor-controlled PWM induction drives
Başlık çevirisi yok
OSMAN KÜKRER
Doktora
İngilizce
1987
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. H. BÜLENT ERTAN
- Dört zamanlı türbaşarj direk püskürtmeli bir dizel motorunun bilgisayar ile sümülasyonu
Computer aided simulation of a fourstroke turbocharged direct-anjection diesel engine
MUSTAFA BALCI
- Finite element analysis of saltwater intrusion in coastal aquifers
Başlık çevirisi yok
SALAH ALİ SADEG
Yüksek Lisans
İngilizce
1987
Jeoloji MühendisliğiOrta Doğu Teknik ÜniversitesiYRD. DOÇ. DR. NURKAN KARAHANOĞLU
- Computer aided striplayout and die design for sheet metal press cutting operations
Başlık çevirisi yok
HAKAN BÜYÜKBAŞ
Yüksek Lisans
İngilizce
1987
Makine MühendisliğiOrta Doğu Teknik ÜniversitesiYRD. DOÇ. DR. MUSTAFA İLHAN GÖKLER
- Analysis and simulation of chopper-controlled DC motors as periodically time-varying systems
Başlık çevirisi yok
TALAT KILCI
Yüksek Lisans
İngilizce
1987
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiDOÇ. DR. MUHAMMED KÖKSAL
