School of mechanical and design engineering
Başlık çevirisi mevcut değil.
- Tez No: 714687
- Danışmanlar: DR. BURHAN SAEED
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: gurney flap, aerofoil, slat, flap, nhlp
- Yıl: 2021
- Dil: İngilizce
- Üniversite: Unıversıty Of Portsmouth
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
A two-dimensional RANS based numerical investigation was performed to determine the aerodynamic performance of a gurney flap on a multi-element aerofoil. These flaps are rectangular shaped and located perpendicularly at the trailing edge of the aerofoil. By comparing with numerical data without gurney flap aerofoils, such as the lift-drag coefficient, and the pressure-velocity distribution, the simulation method has verified. Tested aerofoils are NACA 0012, NACA 23012 slotted flap and NHLP (National High Lift Programme). The attached gurney flap size ranges from 1% to 2% of the aerofoil chord length and the investigation was evaluated between 0° and 20° angle of attack. Additionally, the slat and flap elements in the NHLP (National High Lift Program) aerofoil were compared by including the gurney flap with different deflection angles. It is recommended that gurney flaps size of 1% chord with using at lower angles of attack and take-off stage to gain maximum lift increase with minimum drag penalty. For the landing stage, it is understood that the gurney flap increases the friction due to the increase in the area covered by the air flow, thus helping the landing by shortening the braking distance.
Benzer Tezler
- Helisel yayların statik karakteristiklerini ölçme ve kontrol etme cihazının tasarımı ve imalatı
Design and manufacture of a device measuringand controlling the static characteristics of helical springs
MUAMMER MUSULLUOĞLU
Yüksek Lisans
Türkçe
1987
Makine MühendisliğiGazi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. FEVZİ ERCAN
- Çekme deney makinası tasarımı ve prototip imalatı
Design and construction of a universal tensile testing machine
ABDURRAHMAN BAŞLAMIŞLI
Yüksek Lisans
Türkçe
1988
Makine MühendisliğiGazi ÜniversitesiMakine Eğitimi Ana Bilim Dalı
PROF. DR. ERES SÖYLEMEZ
- A.Ü. Ziraat Fakültesi araştırma ve uygulama çiftliği yollarının yapısal özellikleri ve geliştirme olanaklarının belirtilmesi
A Study on the improvement of farm roads of the experiment station of faculty of agriculture the university of Ankara
LEVENT ŞAYLAN
Yüksek Lisans
Türkçe
1989
ZiraatAnkara ÜniversitesiMeteoroloji Mühendisliği Ana Bilim Dalı
PROF. DR. CENGİZ OKMAN
- Charpy cihazı dizaynı imalatı ve 4718 çeliğinin geçiş sıcaklığının belirlenmesi
Design and production of charpy machine and transition temperature determination of sae 4718 steel
ARİF ANKARALI
Yüksek Lisans
Türkçe
1991
Makine MühendisliğiSelçuk ÜniversitesiMakine Ana Bilim Dalı
DOÇ.DR. REMZİ ÇETİN
- İki yönlü yük altında ortotropik kompozik dikdörtgen levhalarda burkulma
Buckling of the biaxially compressed laminated orthotropic composite plates
SAMİ KAYA