Ca-Mn katkılandırılmış TiO2 esaslı nano yapılı ince filmlerin yüzey morfolojisi ve optik özellikleri
Surface morphology and optical properties of Ca-Mn additive TiO2 based nano structure thin films
- Tez No: 712246
- Danışmanlar: DOÇ. DR. UĞUR ÇALIGÜLÜ
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Kaplama, Nanomateryaller, Sol-jel yöntemi, Titanyum dioksit, İnce filmler, Coating, Nanomaterials, Sol-gel method, Titanium dioxide, Thin films
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Fırat Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Teknolojileri Ana Bilim Dalı
- Bilim Dalı: Metalurji ve Malzeme Mühendisliği Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu tez çalışmasında; Kalsiyum (Ca) ve Mangan (Mn) katkısının Titanyum dioksit (TiO2) nanomalzemesinin yapısal ve yarıiletkenlik özelliklerine etkisi incelendi. Sol jel döndürerek kaplama yöntemi kullanılarak Ca ve Mn katkılı TiO2 esaslı ince filmler üretildi. Hazırlanan numunelerin yüzey morfolojisi Atomik kuvvet mikroskobu (AFM) ile incelendi ve nano boyutta tanelerin olduğu tespit edildi. Ayrıca ortalama yüzey pürüzlülük değerleri incelendi ve artan Ca ve Mn katkısının bu değerde bir düşüşe yol açtığı tespit edildi. Filmlerin kristal yapısı Taramalı Elektron Mikroskobu (SEM) ile incelendi ve tanelerin küresel yapıda olduğu tespit edildi. Karakteristik özellikleri de X-Işını Kırınım yöntemi (XRD) cihazı ile incelendi ve Sherer denklemi yardımıyla numunelerin kristal boyutu hesaplandı. Üretilen filmlerin UV-VIS spektroskopisi ile geçirgenlik, soğurma ve yansıma grafikleri çizilmiş ve yasak enerji aralığı hesaplanmıştır. Ca ve Mn katkısının yasak enerji aralığında artışa yol açtığı tespit edilmiştir. Teknolojik uygulamalarda önemli bir yeri olan yarıiletken film üretimine yönelik bu çalışmada, özellikle maliyet açısından pahalı diğer üretim yöntemlerine alternatif olarak TiO2 ince filmlerin üretilmesi ve farklı malzemeler katkılama imkânı ile özelliklerinin değiştirilmesine olanak sağlanabilmesi açısından önem arz etmektedir. Yapılan araştırmalar sonucunda Ca ve Mn katkısının TiO2 filmlerin morfolojik ve optik özellikleri üzerinde önemli etkileri olduğu ve üretilen numunelerin şeffaf iletken elektrot uygulamalarında, optoelektronik cihazlarda, güneş pillerinde ve sensör üretiminde kullanılabileceği belirlendi.
Özet (Çeviri)
In this thesis, the effects of Calcium (Ca) and Manganese (Mn) additives on the structural and semiconductor properties of Titanium dioxide (TiO2) nanomaterial were investigated. Ca and Mn doped TiO2 based thin films were produced using sol gel spin coating method. The surface morphology of the prepared samples was examined through atomic force microscope (AFM) and nano-sized grains were determined. In addition, the average surface roughness values were examined and it was determined that the increasing Ca and Mn contribution led to a decrease in this value. The crystal structure of the films was examined using Scanning Electron Microscope (SEM) and it was determined that the grains were spherical. Characteristic properties were analyzed by X-Ray Diffraction method (XRD) device and crystal size of the samples was calculated through Sherer equation. Transmittance, absorption and reflection graphs of the films produced by UV-VIS spectroscopy were drawn and the forbidden energy range was calculated. It was determined that Ca and Mn additions paved the way to an increase in the forbidden energy range. This study on semiconductor film production, which plays a significant role in technological applications, is especially important in that TiO2 thin films were produced as an alternative to other costly expensive production methods and enabled them to change their properties by adding different materials. As a result of this study, it is concluded that Ca and Mn additives have important effects on the morphological and optical properties of TiO2 films and the samples produced can be used in transparent conductive electrode applications, optoelectronic devices, solar cells and sensor production.
Benzer Tezler
- Investigation of capacitive behaviour of emulsion polymerized pedot and its nanocomposites
Emülsiyon polimerizasyonu ile sentezlenen pedot ve nanokompozitlerinin kapasitif özelliklerinin incelenmesi
DENİZ GÜLERCAN
Doktora
İngilizce
2019
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ
- Zeolitlere emdirilen kimyasal maddelerin ve Cu+2 katkılandırılmış glisinin EPR spektroskopisi ile incelenmesi
EPR investigation of some chemicals absorpted zeolites and of Cu+2 doped glycine
CEM CÜNEYT ERSANLI
Yüksek Lisans
Türkçe
1997
Fizik ve Fizik MühendisliğiOndokuz Mayıs ÜniversitesiFizik Ana Bilim Dalı
DOÇ.DR. RECEP TAPRAMAZ
- Bazı inorganik yapılarda katkılama ve ışınlama ile oluşturulan bozuklukların EPR ile incelenmesi
An EPR investigation of defects in some anorganic structures formed by irradiation and doping
YUSUF YERLİ
Doktora
Türkçe
2002
Fizik ve Fizik MühendisliğiOndokuz Mayıs ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. FEVZİ KÖKSAL
- Synthesis of mesostructured metal sulfides using transition metal salts:pluronic liquid crystalline mesophases
Geçiş metal tuzları:pluronik sıvı kristal mezofazları kullanarak mezoyapılı metal sülfürlerin sentezlenmesi
YURDANUR TÜRKER
Yüksek Lisans
İngilizce
2007
Kimyaİhsan Doğramacı Bilkent ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. ÖMER DAĞ
- HfFe6Ge6 tipi intermetalik bileşiklerin magnetik özelliklerinin incelenmesi
The investigations of the magnetic properies of HfFE6Ge6 intermetallic compounds
ÖZNUR ÇAKIR
Doktora
Türkçe
2006
Fizik ve Fizik MühendisliğiAnkara ÜniversitesiFizik Mühendisliği Ana Bilim Dalı
PROF. DR. YALÇIN ELERMAN