Polimer kompozitlerde fiber oryantasyonlarının mekanik birleştirme dayanımlarına etkilerinin incelenmesi
Investigation of the effects of fiber orientations on mechanical joining strengths in polymer composites
- Tez No: 700638
- Danışmanlar: PROF. DR. CEMİL ÇETİNKAYA
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada, tek yönlü karbon elyaf malzeme olan reçine emdirilmiş prepreg karbon kumaşlar kullanılmıştır. Prepreg karbon kumaşlardan laminat plaka üretimi için, alüminyum 7075 kalıp malzemeleri kullanılarak ve prepreg karbon elyaf standartlarına göre belirlenen otoklav reçetesi uygulanarak, kürleme işlemi yapılmıştır. Otoklav süreci tamamlanan kompozit plakalar ile 8 kat kumaş kullanılarak 1.9±1 mm kalınlıkta ve yaklaşık %58 lif hacimsel oranına ulaşacak şekilde kompozit karbon elyaf laminatların üretimi gerçekleştirilmiştir. Test işlemleri için 5 adet farklı elyaf dizilimleri içeren kompozit plakaların her birinden 12 adet numune alınmıştır. Toplam olarak 60 numune ASTM D953 standartlarına uygun olarak hazırlanmış ve yine bu standartlara göre test aparatları üretilerek test işlemleri yapılmıştır. Kompozit plakaların içerdikleri elyaf dizilimlerine göre gruplandırılması yapılan numuneler ilk olarak tahribatsız muayeneye tabi tutulmuştur. Tahribatsız muayene işleminde SEM (Taramalı Elektron Mikroskobu) görüntüleri alınan numunelerde serim süreci ve sonrası oluşabilecek hatalar gözlenmiştir. Ayrıca, kompozit malzemelere ASTM D953 standartlarına uygun olarak çekme testi uygulanmış ve dizilim farklılıklarının oluşturduğu grafikler yorumlanmıştır. Yapılan çalışmalar sonucunda elyaf oryantasyonunun istif açılarının değiştirilmesi ile mekanik dayanımın arttırılabileceği gösterilmiştir.
Özet (Çeviri)
In this study, resin-impregnated prepreg carbon fabrics that is a unidirectional carbon fiber material, were used. The curing process was completed by using aluminum alloy 7075 mold materials and applying the autoclave prescription determined according to prepreg carbon fiber standards for laminate plate production from prepreg carbon fabrics. The composite plates, whose autoclave process was completed, were used to produce composite carbon fiber laminates by 8 layers of fabric with a thickness of 1.9 ± 1 mm and a fiber volume ratio of approximately 58%. For testing, 12 samples were taken from different composite plates containing 5 different fiber arrays. A total of 60 samples were prepared in accordance with ASTM D953 standards, and in the same way, test apparatus was produced in accordance with ASTM D953 standards and tested. The samples, which were grouped according to the fiber arrays of the composite plates, were first subjected to non-destructive testing and control. SEM (Scanning Electron Microscopy) images of the samples were taken non-destructively, and errors that may occur during and after the laying process were observed. It was subjected to the tensile test destructively in accordance with ASTM D953 standards and the graphics created by the sequence differences were interpreted one by one. As a result, it has been shown that the mechanical strength can be increased by changing the stacking angles of the fiber orientation.
Benzer Tezler
- Design, analysis and verification of conventional and non-conventional cylindrical cfrp composite shell with optimized cutout under the effect of combined loading
Üzerinde kesitler olan geleneksel ve geleneksel olmayan silindirik karbon fiber kompozit polimer kabuğun bileşik yükleme altında tasarım, analiz ve doğrulanması
MANSUR ÇELEBİ
Doktora
İngilizce
2017
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. HALİT SÜLEYMAN TÜRKMEN
PROF. DR. ZAFER GÜRDAL
- Cam fiber takviyeli polimer kompozitlerde (CFTP)çevresel frezeleme problemlerinin deneysel olarakaraştırılması
Experimental research of peripheral milling problems on glass fiber reinforced polymer composites (GFRP)
OSMAN KARAKADIOĞLU
Yüksek Lisans
Türkçe
2019
Havacılık ve Uzay MühendisliğiGazi Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
PROF. DR. ULVİ ŞEKER
- Nano-melez sistemlerin karbon fiber takviyeli polimer matris kompozitlerde (KFTP) arayüz toklaştırma amacıyla kullanımı
Use of nano-hybrid systems in carbon fiber reinforced polymer matrix composites (CFRP) for interfacial toughening
MELİKE KILIÇOĞLU
Yüksek Lisans
Türkçe
2018
Makine MühendisliğiHacettepe ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. BORA MAVİŞ
YRD. DOÇ. DR. ERHAN BAT
- Improving mechanical properties of adhesive joints in carbon fiber reinforced polymer composites by incorporation of graphene added electrospun polymeric nanofibers
Karbon fiber takviyeli polimer kompozitlerde yapıştırıcı bağlantıların mekanik özelliklerinin grafen ilaveli elektro-eğrilmiş polimerik nanoliflerin eklenmesi ile iyileştirilmesi
MELİSA YEKE
Yüksek Lisans
İngilizce
2023
Makine Mühendisliğiİzmir Yüksek Teknoloji EnstitüsüMakine Mühendisliği Ana Bilim Dalı
PROF. DR. METİN TANOĞLU
- Epoksi matris E-camı dokuma fiber takviyeli termoset kompozitlerde üçüncü bileşen kalsit dolgunun özelliklere etkisi
The effect of third component calcite filler on properties of epoxy matri̇x E-glass woven fabri̇c rei̇nforced thermoset composites
CEVRİYE İLKAY ÜN
Yüksek Lisans
Türkçe
2015
Makine MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET ÜNAL