Simulation of the Forming Process of Non-Crimp Fabrics
Başlık çevirisi mevcut değil.
- Tez No: 692560
- Danışmanlar: PROF. DR. FABİAN DUDDECK
- Tez Türü: Yüksek Lisans
- Konular: Mekatronik Mühendisliği, Makine Mühendisliği, Mechatronics Engineering, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: İngilizce
- Üniversite: Technısche Unıversıtat Munchen
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
The favorable mechanical properties of Non-Crimp Fabrics make them popular in the aerospace and automotive industry. Nevertheless, forming of these fabrics into threedimensional final parts is not as straightforward as for traditional materials and other woven textiles. As a result of the automated forming processes, wrinkling defects and asymmetrical shear behavior are observed in NCFs. These defects and asymmetrical shear behavior deteriorate the quality of the final draped part and decrease productivity of the automated forming process. Therefore, to foresee this defects and take precautions to prevent them happening, Finite Element (FE) simulations of the forming processes of NCFs are needed. In the context of this thesis, a continuum material model which can account for the forming induced defects such as wrinkling and asymmetrical shear behavior happening in NCFs is introduced by utilizing the commercial FEM software ABAQUS/CAE. As a result of the literature screening, FABRIC and VFABRIC user subroutines are found suitable for implementing material properties of NCFs. Picture Frame test simulations are conducted for developing the material model for NCFs. At the end, a hemispherical draping simulation with the developed material model is performed and the wrinkling defects and asymmetrical deformations are observed. In addition, measures to diminish the effects of these wrinkling defects and asymmetrical shear behavior of NCFs are discussed.
Benzer Tezler
- Sonlu elemanlar yönteminin iki boyutlu metal şekillendirme işlemlerine uygulanması
The application of the finite element method to two dimensional metal forming processes
HALİL İBRAHİM ÇOBAN
Yüksek Lisans
Türkçe
2000
Makine MühendisliğiKaradeniz Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. HASAN SOFUOĞLU
- Simulation and mechanical analysis of the cross-wedge rolling process
Çapraz kama haddeleme işleminin simülasyonu ve mekanik analizi
METİN ÇAKIRCALI
Yüksek Lisans
İngilizce
2010
Makine Mühendisliğiİzmir Yüksek Teknoloji EnstitüsüMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA GÜDEN
- A study on the effect of varying selective laser melting process parameters by build process simulation
Proses simülasyonu ile lazerle metal toz ergitme proses parametrelerinin etkisi üzerine bir çalışma
PETER RUGU MAINA
Yüksek Lisans
İngilizce
2020
Havacılık ve Uzay MühendisliğiEskişehir Osmangazi ÜniversitesiHavacılık Bilimi ve Teknolojileri Ana Bilim Dalı
PROF. DR. MELİH CEMAL KUŞHAN
DR. ÖĞR. ÜYESİ EVREN YASA
- Sonlu elemanlar metodu yardımıyla cam işleme prosesinin ısıl analizi
The Thermal analysis of glass forming process by finite elements method
R.ONUR GÜNDÜZ
- Fen bilimleri öğretmenleri ve 7. sınıf öğrencilerinin etkileşimli simülasyon deneyimlerinin incelenmesi
Examining the interactive simulation experiences of science teachers and 7th grade students
ZEYNEP KESKİN
Yüksek Lisans
Türkçe
2022
Eğitim ve ÖğretimKırşehir Ahi Evran ÜniversitesiMatematik ve Fen Bilimleri Eğitimi Ana Bilim Dalı
DOÇ. DR. DİLBER POLAT