ENHANCEMENT THE CONNECTING OF RFID WITH TO INTERNET BY USING HETEROGENEOUS NETWORKING
HETEROJEN AĞ KULLANILARAK RFID'İN İNTERNETLE BAĞLANMASININ GELİŞTİRİLMESİ
- Tez No: 667363
- Danışmanlar: PROF. DR. OSMAN NURİ UÇAN
- Tez Türü: Yüksek Lisans
- Konular: Bilim ve Teknoloji, Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Science and Technology, Computer Engineering and Computer Science and Control
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: İngilizce
- Üniversite: Altınbaş Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Bilgi Teknolojileri Ana Bilim Dalı
- Bilim Dalı: Bilgi Teknolojileri Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Dijital alanda, özellikle ağlar ve iletişim alanında gelişme ve büyüme, dünya çapında dijital bir devrime yol açmıştır. Bu devrim, internetin yeni internet cihazlarını ve hizmetlerini benimseyebilme esnekliğinden kaynaklanmaktadır. Şimdiki zamanda ise çoğu cihaz İnternet'e bağlanabilmektedir. Bununla birlikte, büyük bir cihaz grubu, birkaç farklı nedenden dolayı iletişim kurma yeteneğinden yoksundur. Bu makalede araştırmacı, RFID etiketlerini İnternet'e bağlayabilen bir sistem oluşturmayı ve tasarlamayı amaçlamaktadır. Bu bağlantı, bununla ilgili teknik kısıtlamalar dahilindedir. Bu sistem, etiketi benzersiz bir şekilde kullanarak etiketi, diğer katılımcılarla iletişim kurabilmesi için bağlantı elemanı olarak sunar. Böylece,“Nesnelerin İnterneti”kavramının yakın gelecekte uygulanması kolaylaşacaktır. Oluşturulan sistem sadece bir tesadüf değildir, aynı zamanda diğer araştırmacılar tarafından kabul edilen sonuçlara, analizlere ve araştırmalara göre sistem oluşturulmuş ve tasarlanmıştır. Bu, RFID etiketlerinin İnternet'e bağlamadaki zorlukları ve kısıtlamaları anlamayı kolaylaştırmıştır. Sonuç olarak, analiz TCP / IP yığınının kullanımına dayalı yeni bir sistemin tasarlanması ve inşası ile sonuçlanmıştır. Sistemin amacı, RFID etiketlerini, okuyucunun (ana bilgisayar) içindeki TCP içinde bir işlem olarak göstermektir. Her işlem bir bağlantı noktası numarası (işlem numarası) içerir. Etiketin tanımlayıcısı aracılığıyla, diğer katılımcılar etiketi tanımlayabilir ve onunla iletişim kurabilir. İşlem numarasının, kimlik etiketini yeni bir kimliğe dönüştüren bir çeviri mekanizması aracılığıyla elde edildiği yer, TCP bağlantı noktası numarası olarak kullanılır. Okuyucu tasarlanan sistemde önemli bir rol oynar. Bir grup dinamik okuyucu yerleştirilir ve okuyucular MANET(Mobil Ad-Hoc Ağı) ağında birbirleriyle iletişim kurar. Ve okuyucu ağı Ağ Geçidi üzerinden internete bağlanır. Bu araştırmada, sonuçlar, sistemin tasarlandığı amaca göre mükemmel çalıştığını kanıtlamıştır. Sonuçlar, sistemin RFID etiketlerini İnternet'e bağlayabildiğini ve benzersiz bir şekilde tanımlayabildiğini doğrulamıştır. Ayrıca, sistem, etiketlerin İnternet ve diğer katılımcılar aracılığıyla RFID alanının dışında veri almasını ve göndermesini sağlarmıştır. Sistemin başarısı, araştırmacılara“Nesnelerin İnterneti”kavramını uygulamak için birçok fırsat sunacaktır.
Özet (Çeviri)
The development and growth in the digital field, especially in the field of networks and communications, have led to a digital revolution worldwide. This revolution lies in the ability of internet flexibility to adopt new devices and services on the Internet. Although most devices are able to connect to the Internet at the present time. However, a large group of devices lacks the ability to communicate for several different reasons. In this paper, the researcher aims to create and design a system capable of connecting RFID tags to the Internet. This connection is within the technical restrictions related there to. This system uniquely deals with the tag and represents the tag as a contact entity so that it can communicate with other participants. Thus, the concept of the“Internet of Things”will be easy to implement in the near future. The system that was created was not just a coincidence, but the system was created and designed according to results, analysis, and investigation adopted by other researchers. This made it easy to understand the limitations and difficulties involved in connecting RFID tags to the Internet. Consequently, the analysis resulted in the design and construction of a new system based on the use of the TCP / IP stack. The idea of the system is to represent the RFID tags as a process inside TCP inside the reader (host). Each process contains a port number (process number). Through the identifier of the tag, other participants will be able to identify the tag and communicate with it. Where the process number is obtained by means of a translation mechanism that converts the ID tag into a new ID. It is used as the TCP port number. The reader plays an important role in the designed system. A group of dynamic readers is placed and the readers communicate with each other on the MANET network. And the network of readers is connected to the Internet through the Gateway. In this research, results have proven that the system works perfectly according to the purpose for which it was designed. The results confirmed that the system was able to connect the RFID tags to the Internet and identify them uniquely. In addition, the system enables tags to receive and send data outside the RFID domain via the Internet and through other participants. The success of the system will provide researchers with many opportunities to apply the concept of“Internet of Things”.
Benzer Tezler
- Application of lightweight cryptography techniques in internet of things scenarios
Nesnelerin interneti senaryolarında hafif kriptografi tekniklerinin uygulanması
ÖZLEM ŞEKER
Doktora
İngilizce
2024
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolDokuz Eylül ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÖKHAN DALKILIÇ
- Secured sensor network with raspberry pi as sbc sensor nodes
Raspberry pi ile sbc sensör düğümü güvenli algılayıcı ağ
MOHAMMAD RAFIUZZAMAN
Yüksek Lisans
İngilizce
2015
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolSakarya ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
PROF. DR. CEMİL ÖZ
- İmplante edilebilir geliştirme teknolojilerinin etik açıdan değerlendirilmesi
Ethical evaluation of implantable enhancement technologies
TAYYİBE BARDAKÇI
Doktora
Türkçe
2023
Deontoloji ve Tıp Tarihiİstanbul ÜniversitesiTıp Tarihi ve Etik Ana Bilim Dalı
PROF. DR. İLHAN İLKILIÇ
- Improvement of the cyclic flexural capacity of RC columns with FRP reinforcement
Lifli polimer donatılar kullanılarak betonarme kolonların çevrimsel yükler altında eğilme kapasitelerinin artırılması
ENGİN CÜNEYT SEYHAN
Doktora
İngilizce
2016
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ALPER İLKİ
- A framework for the embodiment of empathy in design education: Exploring empathic perspective-taking of design teachers in design conversations
Tasarım eğitiminde empatinin somutlaşması için bir çerçeve: Tasarım eğitmenlerinin tasarım konuşmalarındaki empatik bakış açılarını keşfetmek
PELİN EFİLTİ
Doktora
İngilizce
2024
Endüstri Ürünleri Tasarımıİstanbul Teknik ÜniversitesiEndüstriyel Tasarım Ana Bilim Dalı
DOÇ. DR. KORAY GELMEZ