İletken ve monodispers poli (pirol/stiren) kompozit lateks sentezi ve karakterizasyonu
Synthesis and characterization on conductive and monodisperse polly (pyrrole/styrene) composite latex
- Tez No: 66131
- Danışmanlar: DOÇ. DR. EMİN ARCA
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Kompozit malzemeler, Polimerleşme, Polipirol, Polistiren, İletkenlik, Composite materials, Polymerization, Polypyrrole, Polystyrene, Conductivity
- Yıl: 1997
- Dil: Türkçe
- Üniversite: Hacettepe Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
ÖZET Yapılan çalışmada dispersiyon polimerizasyonu ile üretilen polistiren latekslere pirolün difüzyonu ve oluşan yapının polimerizasyonu sonucu 1-lO'S/cm aralığında iletkenlik özelliği gösteren kompozit bir yapı sentezlenmiştir. Bu yapı poli(pirol/stiren) kompozit yapısıdır. Dispersiyon polimerizasyonu yolu ile sentezlenmiş polimerik mikroküreler sentezde çıkış materyali olarak kullanılmıştır. İletken poli(pirol/stiren) kompozit sentezi yöntemi; monodispers polistiren bazlı lateks partiküllerin hazırlanması, pirol monomeri ile şişirilmesi ve pirolün uygun bir oksidant kullanılarak polistiren yapı içerisinde polimerizasyonu olmak üzere üç temel basamaktan oluşmaktadır. Başlangıç materyali olarak kullanılan polistiren lateksler sentez koşulları değiştirilerek farklı boy ve gözeneklilik özelliklerinde hazırlanmıştır. Polistiren partiküllerin pirol ile şişirilme işlemi lauril sülfat içeren sulu emülsiyon ortamında yürütülmüştür. Pirolün partikül içi polimerizasyonu oksidant olarak demir (III) klorür kullanılarak oda sıcaklığında yapılmıştır. Yapılan çalışmada iletken poli(pirol/stiren) kompozit eldesi ve yöntem koşullarının iletkenliğe etkisinin belirlenebilmesi amacıyla, lauril sülfat (SDS) derişimi, oksidant/pirol mol oranı, kompozitin pirol içeriği, pirol/polistiren matris ağırlık oranı, polistiren matris tipi ve çapı değiştirilmiştir. Elde edilen sonuçlar iletken poli(pirol/stiren) kompozitinin iletkenliğinin SDS derişiminin artışı ile azaldığını, oksidant derişiminin artışı ile arttığını göstermiştir. Kompozitin pirol içeriğinin artması iletkenlikte belirgin bir artışa neden olmuştur. Kompozit materyalin pirol içeriğinin artışı yapılan taramalı elektron mikroskop (SEM) çalışması ile gösterilmiştir. Ayrıca düşük oksidant derişimlerinde kompozit ürünün monodispers formda elde edilebildiği gözlenmiştir. Polipirol yapısının polistiren yapıya inkorparasyonu FTIR analizleri ile kanıtlanmıştır.
Özet (Çeviri)
11 ABSTRACT A composite structure, poly(pyrrole/styrene), having a conductivity in the range of 1-101 S/cm was produced by the polymerization of pyrrole monomer within the polystyrene microspheres prepared by a dispersion polymerization method. In this synthesis, a multistep procedure comprising the diffusion and the polymerization of monomer was applied. The polystyrene based microspheres synthesized by dispersion polymerization method were utilized as seed particles. The synthesis method of conductive poly(pyrrole/styrene) composite included three different steps: These were the preparation of monodisperse polystyrene seed particles, the swelling of seed particles by pyrrole monomer and the polymerization of pyrrole within the swollen seed particles by using a proper oxidant. The swelling of process was carried out within the aqueous emulsion medium containing lauryl sulphate (SDS) as the emulsifier. The polymerization of pyrrole within the seed particles could be achieved at room temperature by using ferrous chloride as the oxidant. The concentrations of emulsifier (i.e., SDS) and pyrrole within aqueous reaction medium, the oxidant/pyrrole mole ratio and the seed particle size were changed to investigate the effects of these variables on the conductivity of resultant composite structure. The results indicated that the conductivity of poly(pyrrole/styrene) composite decreased by the increasing SDS concentration and increased by the increasing oxidant concentration. The increase in the pyrrole content of the composite structure resulted a clear increase in the conductivity. This increase was also proven by an electron microscopic study. The monodisperse and conductive composite particles could be achieved by utilizing only low oxidant concentrations in the aqueous reaction medium. The incorparation of polypyrrole into polystyrene structure was proved by FTIR analysis.
Benzer Tezler
- Poli (O-anisidin)'in kimyasal sentezi, çözünürlüğü ve fizikokimyasal özelliklerinin belirlenmesi
Chemically, synthesis, solubility and determination of physicochemical properties of poly (O-anisidine)
CEMİLE ÖZDEMİR
- İletken ve yalıtkan daykların analog deney tankı ve sonlu eleman yöntemi kullanarak modellenmesi
The modeling of conductive and resistive dikes using the analogue experiment tank and the finite element method
FATİH KAZANCI
Yüksek Lisans
Türkçe
1997
Jeofizik MühendisliğiKaradeniz Teknik ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NART COŞKUN
- Synthesis and characterization of some conducting oxides and sulficles
Bazı iletken oksit ve kükürtlü bileşiklerin sentezlenmesi ve karakterizasyonu
HALİL GÜLER
Doktora
İngilizce
1996
KimyaOrta Doğu Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. MERAL KIZILYALLI
- Conducting polymers and composites of pyrrole and their uses as sensors
Pirolün iletken polimer ve kompozitleri ve sensör olarak kullanımları
FATMA SELAMPINAR
Doktora
İngilizce
1997
KimyaOrta Doğu Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. LEVENT KAMİL TOPPARE
- Dağıtık sistemler için önerilen dosya bulucu bir sistem tasarımı ve gerçeklenmesi: Dosya isim servisi
Design and application of a file locating sistem proposal for distributed systems: File name service
AHMET TEVFİK İNAN
Doktora
Türkçe
1998
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolYıldız Teknik ÜniversitesiBilgisayar Bilimleri ve Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET YAHYA KARSLIGİL