Investigation of mechanical and physical properties of spunlaced nonwoven fabrics containing bicomponent fibers
Bikomponent elyaf içeren spunlace dokunmamış kumaşların fiziksel ve mekaniksel özelliklerinin incelenmesi
- Tez No: 659596
- Danışmanlar: DOÇ. DR. MEHMET DAŞDEMİR
- Tez Türü: Yüksek Lisans
- Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: İngilizce
- Üniversite: Gaziantep Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu tez kapsamında, geleneksel su jeti ile birleştirilmiş dokunmamış kumaşlarda kullanılan polietilen tereftalat (PET) ve viskon (CV) elyaf karışımlarından farklı olarak polietilen/polipropilen (PE/PP) ve polietilen/ polietilen tereftalat (PE/PET) kabuk/öz tipi bikomponent lifler, PP, pamuk ve bambu lifleri farklı karışım oranlarında PET ve CV lifleri ile karıştırılarak yenilikçi su jetiyle birleştirilmiş dokunmamış kumaşlar elde edilmiştir. Geliştirilen dokunmamış kumaş numunelerinin fiziksel, mekaniksel, konfor ve sıvı transfer özellikleri analiz edilmiştir. Su jeti ile birleştirilmiş dokunmamış üretim teknolojisinde proses sıcaklığını optimize etmek için farklı sıcaklıklarda (90°C, 110°C ve 130°C) denemeler gerçekleştirilmiştir. Bu kapsamda bikomponent liflerin kabuk bileşeninin eridiği ve soğuduktan sonra bağlanma oluşturduğu tespit edilmiştir. Proses sıcaklığı arttıkça bağlanma noktaları da artmıştır. Elde edilen sonuçlara göre proses sıcaklığındaki artışla birlikte dokunmamış kumaş numunelerinin gerilme mukavemetinin, eğilme rijitliğinin ve geri ıslatma değerlerinin arttığı, hava geçirgenliğinin, sıvı emme süresinin ve sıvı emme kapasitesinin azaldığı bulunmuştur. Ek olarak, bikomponent liflerdeki bileşenlerin türünün ve oranlarının, su jeti ile birleştirilmiş dokunmamış kumaş özelliklerine, özellikle gerilme mukavemetine, sıvı emme süresine ve geri ıslatmasına ciddi bir etkide bulunduğu tespit edilmiştir. Bu çalışmanın önemli çıktısı ise, hijyenik pedlerde, çocuk bezlerinde, ter emici pedlerde, vb. emici hijyen ürünlerinde, emici dağıtıcı tabaka (ADL) olarak kullanılabilecek potansiyel yeni tip bir su jeti ile birleştirilmiş dokunmamış kumaş ürününün geliştirilmiş olmasıdır.
Özet (Çeviri)
In the scope of this thesis, unlike polyethylene terephthalate (PET) and viscose fiber (CV) blends used in traditional spunlaced nonwoven fabrics, polyethylene/polypropylene (PE/PP) and polyethylene/polyethylene terephthalate (PE/PET) sheath/core type bicomponent fibers, polypropylene, cotton, and bamboo fibers in addition to PET and CV were used in different blend ratios to obtain novel spunlaced nonwoven fabrics. Physical, mechanical, comfort, and liquid transfer properties of the novel spunlaced nonwoven samples were analyzed. Trials at different temperatures (90°C, 110°C, and 130°C) have been carried out to optimize the spunlaced nonwoven processing temperature. It has been determined that the sheath component of bicomponent fibers melted and formed bonding upon cooling. As the processing temperature increases the bonding points increase. According to the results obtained, tensile strength, bending rigidity, and wet-back values increased and air permeability, liquid strike through time, and the liquid absorption capacity values decreased with the increase in processing temperature. In addition, it has been determined that the type and ratios of components in bicomponent fibers have a serious effect on the spunlaced nonwoven fabric properties, especially tensile strength, liquid strike through time, and wet-back. The important outcome of this study is a potential novel spunlaced nonwoven product that can be used in acquisition distribution layer (ADL) of hygiene products such as sanitary napkins, diapers, and sweat pads.
Benzer Tezler
- Investigation of physical and mechanical properties of polyurethane nanocomposites prepared using different types of nano additives
Farklı nano katkılar ile hazırlanan poliüretan nanokompozitlerinin fiziksel ve mekanik özelliklerinin incelenmesi
BAHAR BÜYÜKKAHRAMAN
Yüksek Lisans
İngilizce
2014
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NURSELİ UYANIK
- Investigation of physical and mechanical properties of 316L and 410 stainless steels manufactured by powder metallurgy method
Toz metalurjisi yöntemiyle üretilen 316L ve 410 paslanmaz çeliklerin fiziksel ve mekaniksel özelliklerinin araştırlması
AYŞE NUR ACAR
Doktora
İngilizce
2019
Makine MühendisliğiÇukurova ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ABDUL KADİR EKŞİ
DOÇ. DR. AHMET EKİCİBİL
- Investigation of fabrication optimization and physical and mechanical properties of metallic syntactic foams manufactured by cold chamber die casting
Açık hazneli basınçlı döküm yöntemi ile sintaktik köpük metal üretimi ve optimizasyonu ile fiziksel ve mekanik özelliklerin incelenmesi
ÇAĞIN BOLAT
Doktora
İngilizce
2022
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALİ GÖKŞENLİ
- Investigation of the effects of temperature on physical and mechanical properties of monolithic refractory made with pozzolanic materials
Puzolanik malzemelerle yapılmış monolitik refrakterlerin sıcaklık etkisinde fiziksel ve mekanik özelliklerinin incelenmesi
BAYRAM MURAT MÖREL
Yüksek Lisans
İngilizce
2005
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. LUTFULLAH TURANLI
PROF. DR. ALİ KALKANLI
- Investigation of mechanical, physical and flame retardant properties of polypropylene compounds using synergisticcombination of minerals and intumescent flame retardants
Polipropilen bileşiklerinin mekanik, fiziksel ve alev geciktiriciözelliklerinin mineraller ve köpüren alev geciktiricilerinsinerjistik kombinasyonunun kullanılarak incelenmesi
MERVE KAHRAMAN
Doktora
İngilizce
2022
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NİLGÜN KIZILCAN