Nanoselüloz ve bor nitrür katkılı polimer kompozitlerin hazırlanması ve karakterizasyonu
Preparation and characterization of nanocellulose and boron nitride added polymer composites
- Tez No: 632759
- Danışmanlar: DOÇ. DR. HANDE ÇELEBİ
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: Türkçe
- Üniversite: Eskişehir Teknik Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Elektronik cihazların sürekli olarak küçülmesi ve güç yoğunluklarının artması ile cihazlarda hızlı bir şekilde biriken termal yük daha hızlı ve etkili ısı dağılımı gerektirmektedir. Bu nedenle, ısıl iletkenliğe sahip malzemelerin elektronik cihazlarda kullanımı önem kazanmaktadır. Bu çalışmada, bor nitrür nanotabaka (BNNT) ve nanoselüloz (NC) ilavesinin polilaktik asit (PLA) matrisinin termal ve mekanik özellikleri üzerindeki etkisi incelenmiştir. Bor nitrür (BN), üstün termal iletkenliği ve mekanik özellikleri nedeniyle polimer kompozitler için potansiyel bir inorganik katkı maddesidir. Asit hidroliziyle mikrokristalin selülozdan hazırlanan selüloz nanoparçacıkları benzersiz fiziksel ve kimyasal özellikleri, doğal bolluğu, yenilenebilirlik ve sürdürülebilirlik özellikleri nedeniyle dikkat çekmektedir. Bu çalışmada, farklı derişimlerde bor nitrür (BNNT) ve/veya nanoselüloz (NC) içeren polilaktik asit (PLA) kompozitleri çözelti döküm yöntemi ile hazırlanmıştır. Geçirimli Elektron Mikroskobu (TEM), Taramalı Elektron Mikroskobu (SEM), Termogravimetrik Analiz (TGA), Diferansiyel Taramalı Kalorimetri (DSC), Termal İletkenlik, Termomekanik Analiz (TMA), Fourier Dönüşümü Kızılötesi Spektroskopisi (FTIR) ve X-Işını Kırınımı (XRD) analizleri ve çekme testi ile kompozitlerin karakerizasyonu yapılmıştır. PLA matrisine nanoselüloz eklenmesiyle çekme dayanımı ve Young modülü artarken kopmada uzama değerleri azalış göstermiştir. BNNT katkısıyla artan çekme dayanımı daha yüksek derişimlerde aglomerasyon oluşumu sonucu düşüş eğilimine girmiştir. Saf PLA'nın termal iletkenliği 0,13 W/mK iken, ağırlıkça %5 NC ve %5 BNNT ilavesiyle termal iletkenlik 0,33 W/mK'e, BNNT'nin viniltrimetoksi silan modifiyesi sonrası ise 0,35 W/mK değerine ulaşmıştır. Matris içerisindeki BNNT'ler arasında geniş temas yüzeyi elde edilmiş ve bu nedenle kompozit yüzeyi boyunca ısı transferinde termal temas direnci en aza indirilerek termal iletkenlik değeri artmıştır.
Özet (Çeviri)
The rapidly increased thermal load as a result of the continuous down-scaling of electronic devices and increase in power densities require faster and more effective heat dissipation. Therefore, the thermal conductivity of materials has attracted much attention in modern electronics. In this study, the effect of the addition of boron nitride nanosheet (BNNT) and nanocellulose (NC) on the thermal and mechanical properties of the polylactic acid (PLA) matrix was investigated. Boron nitride (BN) is a potential inorganic additive for polymer composites due to its superior thermal conductivity and mechanical properties. Cellulose nanoparticles prepared from microcrystalline cellulose by acid hydrolysis attract attention due to their unique physical and chemical properties and the inherent abundance, renewability and sustainability. In this study, polylactic acid (PLA) composites containing boron nitride and/or nanocellulose in different concentrations were prepared by solvent casting method. Characterization of composites were carried out by using Transmission Electron Microscopy (TEM), Scanning Electron Microscope (SEM) Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Thermal Conductivity, Thermomechanical Analysis (TMA), Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Diffraction XRD) analysis and tensile tests. The addition of nanocellulose to the PLA matrix increased the tensile strength and Young's modulus while it decreases elongation at break values. Increased tensile strength with BNNT addition tends to decrease at higher concentrations as a result of BNNT agglomerations. While the thermal conductivity of neat PLA was 0.13 W/mK, with the addition of 5wt. % NC and 5 wt. % BNNT the thermal conductivity reached 0.33 W/mK, after modification of BNNT with vinyltrimethoxy silane, it reached 0.35 W/mK. A large contact surface was obtained between the BNNTs in the matrix and therefore the thermal conductivity value increased by minimizing thermal contact resistance in heat transfer all the way through the composite surface.
Benzer Tezler
- Nanopartikül ilaveli PLA ve PHB biyokompozitlerinin bazı özelliklerinin belirlenmesi
Determining of some properties of nano particles filled PLA and PHB biocomposites
GÜLYAZ AL
Yüksek Lisans
Türkçe
2015
Mühendislik BilimleriBartın ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. DENİZ AYDEMİR
- Alev geciktirici borlu selülozik çadır
Flame retardant boron doped cellulosic tent
ALİ YARAŞ
Doktora
Türkçe
2016
Kimya MühendisliğiGazi ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. ATİLLA MİRATİ MURATHAN
DOÇ. DR. HÜSEYİN ÇELİKKAN
- Nanoselüloz ve bor bileşiklerinin ahşap kompozit levhaların performans özelliklerine etkisi
The effect of nanocellulose and boron compounds on the performance properties of wood composite panels
MERT YILDIRIM
Yüksek Lisans
Türkçe
2019
Mühendislik Bilimleriİstanbul Üniversitesi-CerrahpaşaOrman Endüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. ZEKİ CANDAN
- Ayçiçeği saplarından bazı nanoselüloz türevlerinin üretimi, karakterizasyonu ve farklı uygulama alanlarında değerlendirilmesi
Production and characterization of some nanocellulose derivatives from sunflower stalks and their evaluation in different application areas
EKREM DURMAZ
Doktora
Türkçe
2021
Ağaç İşleriKastamonu ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. SAİM ATEŞ
- Yeni dinükleer ve trinükleer salen-bor komplekslerinin sentezi, karakterizasyonu, stereojenik ve antibakteriyel özelliklerinin incelenmesi ve antibakteriyel tekstil üretimi için salen-bor kompleksleri ile fonsiyonelleştirilmiş mikro-,nano-liflerin hazırlanması
Syntheses, characterization, investigation of the stereogenic and antibacterial properties of new dinuclear and trinuclear salen-boron complexes, preparation of functionalized micro-,nano-fibers with salen-boron complexes for antibacterial textile production
BUSE ÇAM