Performance of the nanosilica filled neat epoxy and carbon fiber filament wound composites
Nanosilika dolgulu epoksi ve karbon elyaf takviyeli filaman sargı ile üretilmiş kompozitlerin performansı
- Tez No: 605367
- Danışmanlar: PROF. DR. NECATİ ÖZKAN
- Tez Türü: Yüksek Lisans
- Konular: Mühendislik Bilimleri, Polimer Bilim ve Teknolojisi, Engineering Sciences, Polymer Science and Technology
- Anahtar Kelimeler: Kompozit polimerler, Polimer kompozitler, Composite polymers, Polymer composites
- Yıl: 2019
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Polimer Bilim ve Teknolojisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmanın amacı epoksi reçine içerisinde ağırlıkça farklı oranlarda kullanılan nanosilikanın, karbon elyaf takviyeli kompozitlerin termal ve mekanik özelliklerinde oluşan etkisini araştırmaktır. Nanosilika geleneksel kompozitlerin matris dominant özelliklerinin iyileştirilmesi için, matris içerisinde kolayca dağılımı sağlanabilen nanokatkılardır. Tezin ilk bölümünde nanosilika dolgulu epoksi kompozitler, daldırma tipi ultrasonik ve elle karıştırma yöntemleri kullanılarak hazırlanmıştır. Filaman sarım prosesinde nanosilika dolgulu epoksi kompozitlerin, jelleşme süresi ve elyaf ıslatma davranışını anlaşılabilmesi için viskoziteleri belirlenmiştir. Kompozitler, farklı nanosilika ağırlık oranlarında hazırlanmış ve kürleşme sonrası mekanik, termal ve mikroskobik karakterizasyon testleri gerçekleştirilmiştir. Çekme mukavemetindeki ağırlıkça %0,5 nanosilikanın kullanıldığı nanokompozitlerde %13,5 ile en yüksek artış elde edilmiş, çekme modülünde ise katkısız reçinelere göre bir değişim gözlemlenmemiştir. Tezin ikinci bölümünde, epoksi reçine içerisinde farklı ağırlıkça oranlarda nanosilika dolgusunun karbon elyafı ile güçlendirilmiş epoksi kompozitlerdeki mekanik ve termal özelliklere olan etkileri incelenmiştir. Elyaf takviyeli test kuponları, filaman sarım tekniğiyle kompozit haline getirilmiş ve düz plakadan kesilerek üretilmiştir. Karbon elyaf takviyeli nanokompozitlerin camsı geçiş sıcaklığı, Dinamik Mekanik Analiz Cihazı (DMA) ile ölçülmüştür. Nanosilika partikül dolgusu ile hazırlanan numunelerin cam geçiş sıcaklığı değerinde kayda değer bir değişim elde edilmemiştir. Taramalı Elektron Mikroskobu (SEM) analizi karbon elyaf takviyeli kompozitlerin hasar mekanizmalarını incelemek ve katkısız referans kuponlar ile karşılaştırmak için gerçekleştirilmiştir. Karbon elyaf takviyeli kompozitlerin mod I katlararası kırılma tokluğu enerjisi (GIC) değerinde ağırlıkça %2 nanosilika partikül dolgusu ile yaklaşık %104; mod II katlar arası kırılma tokluğu enerjisi (GIIC) değerinde ise ağırlıkça %0,5 nanosilika dolgusu ile yaklaşık %21 artış sağlanmıştır. Çekme dayanımı değerlerinde ağırlıkça %0,5 nanosilika dolgusu ile %13,5 olarak artış elde edilmiştir.
Özet (Çeviri)
The main aim of this thesis was to investigate influences of nanosilica particle addition to epoxy resin matrices (systems) on the thermal and mechanical properties of carbon fiber reinforced epoxy-nanosilica composites. Nanosilica particles were used for increasing the matrix dependant mechanical properties of conventional composite materials with easy dispersion processes in matrix. In the first part of the thesis, nanosilica filled epoxy composites were prepared using both a probe type ultrasonic processor and manuel mixing. Viscosities of the nanosilica filled epoxy resins were determined to understand the gelling time and wetting behaviour of those resins and to select the processing parameters for the filament winding process. The nanosilica filled epoxy composites with different weight ratios of nanosilicas were prepared, and then the mechanical, thermal, and morphological characterizations of the cured specimens were carried out. The best result in terms of tensile strength for those composites was obtained when 0.5 wt% nanosilica was added. The addition of nanosilica did not influence the elastic modulus of those composites considerably. In the second part of the thesis, the aim was to investigate the effects of nanosilica on the properties of carbon fiber reinforced epoxy composites. Test coupons for mechanical tests were prepared from the flat plates manufactured using a filament winding process. The glass transition temperatures of the nanosilica filled carbon fiber reinforced epoxy composites were measured using a Dynamic Mechanical Analyser (DMA). The addition of silica particles did not change the glass transition temperatures of the composites. The Scanning Electron Microscope (SEM) analyses were performed to understand damage mechanisms of the nanosilica filled carbon fiber reinforced epoxy composites. Mode I interlaminar fracture toughness energy, GIC, of the nanosilica filled carbon fiber reinforced epoxy composite containing 2.0 wt% nanosilica was increased 104% compared to the control sample (i.e. no nanosilica added sample). Mode II interlaminar fracture toughness energy, GIIC, of the carbon fiber reinforced containing 0.5 wt% nanosilica was increased about 21% compared to the control sample. The tensile strength of the carbon reinforced composites were increased 13.5% increase with addition of 0.5 wt% nanosilica in epoxy.
Benzer Tezler
- Polihidroksibütirat-ko-hidroksivalerat biyonanokompozitlerinin silikalanmış hidroksiapatit nanopartikülleri ile hazırlanması ve karakterizasyonu
Fabrication and characterization of poly(hydroxybutyrateco-hydroxyvalerate) bionanocomposites with reinforcement by silicated hydroxyapatite nanoparticles
ZEYNEP KIRAL
Yüksek Lisans
Türkçe
2023
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. MUALLA ÖNER
DR. ÖĞR. ÜYESİ SEMRA KIRBOĞA OKUMUŞ
- Grafen nanoplatelet, nano gadolinyum oksit ve mikro silika jel katkılı epoksi kompozitlerin elektromanyetik kalkanlama ve akustik özelliklerinin incelenmesi
Investigation of electromagnetic shielding and acoustic properties of graphene nanoplatelet, nano gadolinium oxide and micro silica gel filled epoxy composites
İSMAİL MELİK TAŞ
Yüksek Lisans
Türkçe
2023
Fizik ve Fizik MühendisliğiHacettepe ÜniversitesiFizik Mühendisliği Ana Bilim Dalı
PROF. DR. SEVGİ BAYARI
- Factors influencing the properties of sclc and structural steel tube columns infilled with sclc
Kendiliğinden yerleşen hafif betonun ve bu beton dolgulu yapısal çelik tüp kolonların özelliklerine etki eden faktörler
ODAY ALI AZEZ ALTAYAWI
Doktora
İngilizce
2017
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ESRA METE GÜNEYİSİ
- Nano malzeme katkılı çok fonksiyonlu kompozit yapıların geliştirilmesi
Development of nanomaterial reinforced multi functional composite structures
KENAN BAYRAK
Yüksek Lisans
Türkçe
2023
Makine MühendisliğiEskişehir Osmangazi ÜniversitesiHavacılık Bilimi ve Teknolojileri Ana Bilim Dalı
DOÇ. DR. SELİM GÜRGEN
DR. ESRA ÖZDEMİR ER
- Aramid fiber takviyeli silika aerojel kompozitlerin balistik ve mekanik performansının belirlenmesi
Determination of ballistic and mechanic performance of aramid fiber reinforced silica aerogel composites
HASAN YAVUZ ÜNAL
Doktora
Türkçe
2023
Makine MühendisliğiEge ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. YELİZ PEKBEY