Geri Dön

Pas lekelerinin seramik form ve yüzeylerde somutlaştırılması

The concretisation of rust stains on ceramic forms and surfaces

  1. Tez No: 554001
  2. Yazar: BAĞDAGÜL DEMİRTÜRK
  3. Danışmanlar: DOÇ. UFUK TOLGA SAVAŞ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Güzel Sanatlar, Fine Arts
  6. Anahtar Kelimeler: Leke, Pas, Paslanma, Resim sanatı, Sanat eserleri, Seramik dekoru, Seramik sanatı, Seramikler, Stain, Rust, Rusting, Painting art, Artistic works, Decor of ceramic, Ceramic art, Ceramics
  7. Yıl: 2019
  8. Dil: Türkçe
  9. Üniversite: Hacettepe Üniversitesi
  10. Enstitü: Güzel Sanatlar Enstitüsü
  11. Ana Bilim Dalı: Seramik Ana Sanat Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

20. yüzyılın sanat alanlarında önem kazanan bireyselleşmeyle birlikte geleneksel ifade biçimlerinin yerini, yenilikçi ve özgün sanatsal arayışlar almaya başlamıştır. Kendi döneminin dünya görüşüyle biçimlenen sanatsal anlatımın gerçekleşmesinde, her sanat kendi anlatım dilini, kendine özgü araçlarıyla kurmuştur, Sentetik Kübizm'den günümüz resim sanatına uzanan süreçte, geleneksel resim malzemesi olan boyanın dışında; malzemenin çeşitlilik gösterdiği görülmüştür. Bu ifade biçimi, aykırı malzeme kullanımıyla sanata farklı bakış açısı getirmiş ve yeni bir anlatım dili oluşturmuştur Bu çalışmanın başlangıç aşamasında, alternatif bir malzeme olan paslanmış metalin yüzey üzerindeki iz etkisini anlamaya yönelik araştırma ve deneylerle, iz ve metal bağlamı üzerine resimsel ve estetik çözümlemeler yapılarak, Metalin zaman içerisinde göstermiş olduğu değişiminin; eskime, yaşlanma, yok olma, tükeniş, çürüme, bozulma, süreç gibi kavramların karşılığı olarak benimsenmiş. Yalnız resim alanına has bir özellik olan iki boyutlu yüzeyde yaratılan eserlerden yola çıkarak seramik formlarda reaksiyonun sunduğu lekelerin üç boyuta aktarılmaya çalışılmasını konu edinmiştir. Bu düşünce özgün seramik formlarda uygulamayı amaçlamıştır. Çalışmanın ilk bölümünde resim sanatında karışık malzeme sonucu alternatif boya yerine kullanılan pas ve paslanma süreci, malzeme ile çalışan sanatçılardan örnekler, malzemenin sanata olan etkisi, anlatılmaya çalışılmış. Çalışmanın son bölümünde ise, pas lekelerinden yola çıkılarak ve estetik kaygılar güdülerek, temel amaç olan etkileşim ve yaratım sürecinin seramik formlarda uygulanması hedeflenmiştir.

Özet (Çeviri)

Innovative and original artistic pursuits have begun to succeed traditional ways of expression when the sense of individualism gained significance in art fields of the 20th century. To achieve artistic expression that was shaped by the period of time it's in, every branch of art has composed its own language with tools exclusive to it. Since the creation of synthetic cubism to today's pictorial art, a variation of ingredients from the traditional ingredient of paint was observed. This way of expression, with the usage of different ingredients, has resulted in the formation of a different point of view for art and a new language for expression. In the beginning of this study, with research and experiments conducted to understand the effect of markings that the alternative ingredient rusted metal leaves on the surface, the changes metal undergoes over time were associated with concepts such as wearing, aging, evanescence, decay, deterioration and process by ways of pictorial and aesthetic examination. From the basis of works that have been created upon a two dimensional surface that is typically associated only with paintings, the effort to transfer the stains presented upon the reactions on ceramic onto all three dimensions was discussed. This was intended to be performed on unique ceramic forms. In the first section of this study, the usage of rust and the process of rust formation by ways of mixed ingredients instead of alternative paint, examples from the works of artists who worked with such ingredients, and the ingredients' impact on art was discussed. In the final section of this study, on the basis of rust stains and aesthetic consideration, the main objectives, namely the process of interaction and creation, were intended to be implemented during the creation of ceramic art.

Benzer Tezler

  1. Granitlerde mineraloji kaynaklı jeolojik sorunların araştırılması: Aksaray (İç anadolu Bölgesi-Türkiye)

    The investigation of mineralogy-induced geological problems in granites: Aksaray (Central Anatolia Region - Turkey)

    OSMAN SERKAN ANGI

    Doktora

    Türkçe

    Türkçe

    2016

    Jeoloji Mühendisliğiİstanbul Teknik Üniversitesi

    Jeoloji Mühendisliği Ana Bilim Dalı

    DOÇ. DR. EMİN ÇİFTÇİ

  2. Design of a stainless steel composite bridge according to the eurocodes and cost analysis

    Paslanmaz çelik ile kompozit bir köprünün eurocode'a göre tasarımı ve maliyet analizi

    TİJEN BAYER

    Yüksek Lisans

    İngilizce

    İngilizce

    2014

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. BARLAS ÖZDEN ÇAĞLAYAN

  3. Güneş leke gruplarının güneş patlaması üretme potansiyellerinin araştırılması

    Investigation of flare production potential of sunspot groups

    SALİHA EREN

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Fizik ve Fizik MühendisliğiAkdeniz Üniversitesi

    Uzay Bilimleri ve Teknolojisi Ana Bilim Dalı

    DOÇ. DR. ALİ KILÇIK

  4. Cinsel saldırı delili olarak giysilerde sperm tespitini etkileyen faktörler ve postkoital interval

    Environmental factors effected sperm detection on the clothes as an evidence of sexual assault and postcoital interval

    MEHMET ARICI

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2013

    Adli TıpMersin Üniversitesi

    Adli Tıp Ana Bilim Dalı

    DOÇ. DR. HAKAN KAR

  5. Farklı sistemlerde üretilen yemeklik yumurtaların bazı kalite özelliklerinin karşılaştırılması

    Comparison of some quality characteristics of cooking eggs produced in different systems

    SUNA KARADEMİR

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    ZiraatAnkara Üniversitesi

    Zootekni Ana Bilim Dalı

    PROF. DR. MESUT TÜRKOĞLU