Plastik kompozit üretiminde odun ve yumurta kabuğu kullanımının araştırılması
Investigation of use of wood and egg shell in plastic composite production
- Tez No: 535191
- Danışmanlar: DR. ÖĞR. ÜYESİ FERHAT ÖZDEMİR
- Tez Türü: Yüksek Lisans
- Konular: Mimarlık, Architecture
- Anahtar Kelimeler: Plastik kompozitler, Tahta polimer kompozitler, Plastic composites, Wood polymer composites
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Kahramanmaraş Sütçü İmam Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada yumurta kabuğu dolgulu Odun Plastik Kompozit malzeme üretmek ve üretilen bu malzemenin fiziksel, mekanik, termal ve morfolojik, özelliklerinin incelenmesi amaçlanmıştır. Odun Plastik Kompozit (OPK) malzemelerin fiziksel ve mekanik özelliklerini geliştirmek ve daha uygun maliyetle kompozit malzeme üretmek için farklı dolgu maddeleri kullanılmaktadır. Odun Plastik Kompozit malzemeler kullanım amacına yönelik çok farklı özelliklere sahip olarak üretilebilmektedir. Bu çalışmada yumurta kabuğu odun plastik kompozit içerisinde dolgu maddesi olarak kullanılmıştır. Yumurta kabuğu dolgusu ile neme dayanıklı, radyasyon emilimi yüksek odun plastik kompozit geliştirilmek amaçlanmıştır. Bu sebeple farklı oranlarda yumurta kabuğu dolgulu kompozit numuneler üretildi. Odun plastik kompozit üretmek için kızılçam odun unu, polipropilen, yumurta kabuğu ve Maleik anhidrit ile muamele edilmiş polipropilen belirli oranlarda kullanılmıştır. Yumurta kabuğunun odun plastik kompozit ürün üzerine etkisi incelenmiştir. Yumurta kabuğunun kompozitin ateşe karşı dayanımını artırdığı, yatay yanma hızının azaldığı, aynı zamanda geç tutuşma sağladığı belirlenmiştir. Su alma testi sonucu elde edilen sonuçlara göre, dolgu maddesi olarak kullanılan yumurta kabuğu oranının artması ile malzemenin su alma oranının azaldığı görülmüştür. Yumurta kabuğu oranı artması ile mekanik özelliklerde değişim tespit edilmiştir.
Özet (Çeviri)
In this study, it is aimed to produce Wood Composite material of egg shell and to examine the physical, mechanical, thermal and morphological properties of this material. Wood Plastic Different fillers are used to improve the physical and mechanical properties of composite materials and to produce composite materials at more cost-effective. Wood Plastic Composite materials can be produced with different properties for the purpose of use. For the first time in this study, eggshell wood was used as a filler in the plastic composite. With the eggshell additive, moisture-resistant, radiation-absorbing wood is intended to be developed in the plastic composite. For this reason, composite samples with different egg shell additives were produced. In order to produce wood plastic composites, polypropylene treated with redwood wood flour, polypropylene, eggshell and maleic anhydride has been used in certain ratios. The effect of egg shell on wood plastic composite product was investigated. It has been determined that the egg shell increases the resistance of the composite against fire, that is, the horizontal burning speed decreases, and also it provides late ignition. According to the results obtained from the water test, the rate of water depletion of the material decreased with the increase in egg shell ratio. Changes in the mechanical properties of eggshells increased.
Benzer Tezler
- Aralama çalışması sonrasında elde edilen kayın odunlarının ve kupulasının odun plastik kompozit (OPK) üretiminde değerlendirilmesi
Utilization of beech wood flours obtained after thinning and beech cupula in wood plastic composite (WPC) production
MÜCAHİT ŞAHİN
Yüksek Lisans
Türkçe
2023
Ağaç İşleriKütahya Dumlupınar Üniversitesiİleri Teknolojiler Ana Bilim Dalı
DR. ÖĞR. ÜYESİ İBRAHİM HALİL BAŞBOĞA
- Pişirme kağıtlarının plastik kompozit üretiminde değerlendirilmesi
Evaluation of baking paper fibers in plastic composite production
EDA ERAYDIN
Yüksek Lisans
İngilizce
2019
Polimer Bilim ve TeknolojisiArtvin Çoruh ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. EMRAH PEŞMAN
- Alkali ön işlemine uğratılmış atık gazete kağıdı liflerinin plastik kompozit üretiminde değerlendirilmesi
Evaluation of waste newspaper fibres which is pretreated with alkali in plastic composite production
SEDA ŞAHİNBAŞ
Yüksek Lisans
Türkçe
2017
Polimer Bilim ve TeknolojisiArtvin Çoruh ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. EMRAH PEŞMAN
- Buğday sapı unu oranının ve plastik tipinin odun-plastik kompozitlerin mekanik özelliklerine etkisi
The effect of wheat straw flour loading and plastic type on the mechanical properties of wood-plastic composites
AYŞE KABAKCI
Yüksek Lisans
Türkçe
2009
Ormancılık ve Orman MühendisliğiKahramanmaraş Sütçü İmam ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. FATİH MENGELOĞLU
- Termal işlem uygulanmış mısır saplarından üretilen odun plastik kompozitlerinin fiziksel ve mekanik özellikleri
Physical and mechanical properties of wood plastic composites produced from thermally treated corn stalks
GÖKHAN YILMAZ
Yüksek Lisans
Türkçe
2020
Ormancılık ve Orman MühendisliğiDüzce ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. ÜMİT BÜYÜKSARI