Tensile and flexural behavior of nanosilica filled epoxy matrix based fiber reinforced composite laminates
Nanosılıka katkılı epoksi matris tabanlı elyaf takviyeli kompozit laminatların çekme ve eğme davranışları
- Tez No: 498059
- Danışmanlar: YRD. DOÇ. DR. ÖMER YAVUZ BOZKURT
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Gaziantep Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada, nano silis katkısının ve farklı fiber yönelim açısının cam fiber takviyeli polimerik kompozit laminatların çekme ve eğme davranışları üzerine etkileri araştırılmıştır. Nano katkı içeren ve içermeyen kompozit laminatlar el yatırma yöntemi ile üretilmiştir. Dört farklı nano silis katkısı (%1, %1.5, %2 ve %3) içeren ve 0°, 15°, 30°, 45°, 60° gibi farklı fiber yönelimine sahip numuneler değerlendirilmiştir. Sonrasında, çekme test numuneleri ASTM D638-10 ve eğme test numuneleri ASTM D790 standartlarına göre hazırlanmıştır. Nano silis içermeyen numuneye göre en fazla iyileşme gösteren numuneler %2 ve %1.5 nano silis içeren numuneler olarak görülmüştür. Elde edilen sonuçlara göre çekme mukavemeti, çekme modülü, eğme mukavemeti ve eğme modülü sırasıyla 280.25 MPa, 17.8 GPa, 346.35 MPa ve 18.77 GPa olarak bulunmuş ve nano silis-içermeyen numuneye göre sırasıyla %8, %66, %4 ve %15 iyileşme elde edilmiştir. Faklı fiber yönelim açısı olarak 0◦ ve %2 nano silis içeriğine sahip cam fiber takviyeli kompozit laminat diğer yönelim açılarına göre en yüksek değerlere sahip olmuştur. Bu numunede çekme mukavemeti, çekme modülü, eğme mukavemeti ve eğme modülü sırasıyla 280.25 MPa, 17.8 GPa, 337.38 MPa ve 16.74 GPa değerlerindedir.
Özet (Çeviri)
In the current study, the effect of nanosilica filler and different fiber orientation angles at 2wt% nanosilica content on both tensile and flexural characteristics for glass fiber reinforced polymeric composite laminates are detected. The glass fiber/nanosilica/epoxy nanocomposites are fabricated by hand layup process. Four weight fractions of nanosilica particles (1%, 1.5%, 2% and 3%) and different fiber orientation angles (0°, 15°, 30°, 45° and 60°) were utilized for the production of laminate composites. Subsequently, samples for the tensile test were produced according to ASTM D638–10 standards and samples for the flexural test were produced according to ASTM D-790. The acquired outcomes extracted from this study displayed the utmost improvement of the tensile strength, tensile modulus, flexural strength and flexural modulus and this obtained improvement was occurred at nanosilica contents of 2wt% and 1.5wt% with the values of 280.25 MPa, 17.8 GPa, 346.35 MPa and 18.77 GPa respectively, with increment ratios of 8%, 66%, 4% and 15% respectively as compared to unfilled GFRP composite laminates with nanosilica particles. It also revealed that silica filled composites exhibited better than unfilled epoxy composites. Moreover, the GFRP composites with fiber orientation angle of 0◦ at 2wt% nanosilica content were showed the highest values in tensile strength, tensile modulus, flexural strength and flexural modulus compared with the other fiber orientation angles and these values are 280.25 MPa, 17.8 GPa, 337.38 MPa and 16.74 GPa, respectively.
Benzer Tezler
- Investigation of mechanical properties of nanoparticle coated glass fiber/epoxy composites coated with dip coating and industrial production methods
Daldırma ve endüstriyel üretim yöntemleri ile üretilmiş nanoparçacık kaplı cam elyaf/epoksi kompozitlerin mekanik özelliklerinin incelenmesi
EMİR ÇETİNALP
Yüksek Lisans
İngilizce
2024
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
DOÇ. DR. BİRGÜL BENLİ
- Investigation of fracture behavior of particulate polymer composites with effect of S-glass fiber reinforcement
S-cam elyaf takviye etkisi ile partikül polımer kompozitlerin kırılma davranışının incelenmesi
MOHAMAD K.ALWAN ALSAADI
Doktora
İngilizce
2017
Makine MühendisliğiGaziantep ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. AHMET ERKLİĞ
- Vibration, damping property, tensile and flexural behavior of kevlar- carbon/ epoxy / nanosilica composites
Kevlar- karbon / epoksi / nanosilika kompositlerin titreşim, sönüm özelliği ile çekme ve eğilme davranışlarının belirlenmesi
ARKAN JABBAR FARHAN
Yüksek Lisans
İngilizce
2017
Makine MühendisliğiGaziantep ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. AHMET ERKLİĞ
- MECHANICAL AND DURABILITY PROPERTIES OF LIGHTWEIGHT ENGINEERED GEOPOLYMER COMPOSITES EXPOSED TO HIGH TEMPERATURE AND THERMAL CYCLES
YÜKSEK SICAKLIĞA VE TERMAL DÖNGÜLERE MARUZ KALMIŞ TASARLANMIŞ HAFİF JEOPOLİMER KOMPOZİTLERİN MEKANİK VE DURABİLİTE ÖZELLİKLERİ
GHASSAN HUSSEIN HUMUR HUMUR
Doktora
İngilizce
2022
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ABDULKADİR ÇEVİK
- Havacılık uygulamalarında kullanılan hibrid kompozitlerin üretilmesi ve mekanik davranışlarının incelenmesi
Investigation of the production and mechanical behavior ofhybrid composites used in aeronautical applications
MUSTAFA BİRKAN ÖZKAN
Yüksek Lisans
Türkçe
2026
Uçak MühendisliğiSamsun ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. HALİL İBRAHİM KURT
DR. ÖĞR. ÜYESİ ENGİN ERGÜL