Geri Dön

An experimental study on the properties of lightweight concrete with cold bolded fly ash aggregate in correlation with normal aggregate concrete

Soğuk bağlama ile üretilen uçucu kül agregası içeren hafif beton ile normal betonun karşılaştırılması üzerine deneysel bir çalışma

  1. Tez No: 423869
  2. Yazar: OLABODE ADEKUNLE AYODELE
  3. Danışmanlar: DOÇ. DR. MEHMET GESOĞLU
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2016
  8. Dil: İngilizce
  9. Üniversite: Gaziantep Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Buradaki çalışma benzer basınç dayanımındaki hafif ve normal ağırlıklı betonların performansını incelemektedir. Bu amaçla 25 ve 45 MPa basınç dayanımında iki beton basınç dayanımı normal ve hafif agrega kullanılarak betonların üretimi hedeflendi. Toplamda 4 beton karışımı çeşitli su çimento oranında ve çimento miktarında tasarlandı. Kullanılan hafif agrega, çimento ve uçucu külün hafif bağlama yöntemi kullanılarak eğimli bir tamburda ve uygun ortam sıcaklığında pelteleşmesiyle elde edildi. Yapay hafif agregalar doğal agregayla nerdeyse aynı elek analizi sonucuna sahipti. Beton karışımları aynı şartlarda ve aynı yöntemle üretildiler. Deney numuneleri aynı şartlar altında saklandılar. 28 günlük bakım periyodunun ardından numuneler, basınç, yarmada çekme, aderans ve net eğilmede çekme dayanımları, elastisite modülü, elektriksel direnç, kılcal su geçirimliliği, su emme kapasitesi ve kırılma parametreleri için test edildiler. Deney sonuçları hafif agrega kullanımının betonun sertleşmiş özelliklerini olumsuz yönde etkilediğini gösterdi. Ancak betonun basınç dayanımını arttırdıkça bu olumsuz etkinin azaldığı görüldü.

Özet (Çeviri)

The study presented herein investigates the performance of lightweight and normal weight concretes with similar compressive strengths. For this, two concrete compressive strength values of 25 and 45 MPa were aimed to produce with normal and lightweight aggregates. Totally four concrete mixtures were designed at various water-to-cement ratios and cement contents. The lightweight aggregate utilized in this study was produced through cold bonding pelletization of fly ash and cement in a tilted pan at an ambient temperature. The artificial lightweight aggregate had almost same sieve analysis result with natural aggregate. The concrete mixtures were produced at the same condition and procedure and the test specimens of the mixtures were cured at the same circumstances. After 28-day curing period, the specimens were tested for compressive, splitting tensile, bond and net flexural strengths, modulus of elasticity, electrical resistivity, sorptivity, water absorption, and fracture parameters. The test results indicated that utilization of artificial lightweight aggregates significantly influenced the hardened properties of the concretes. However, increasing the concrete compressive strength decreased the effects of the lightweight aggregate utilization.

Benzer Tezler

  1. Pomza agregası kullanılarak üretilen hafif beton özelliklerinin borik asit katkısıyla iyileştirilmesi üzerine deneysel bir araştırma

    An experimental investigation on the improvement with boric acid additive of properties of light wei̇ght concrete produced using pumice aggregate

    HALİL TEZEL

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    İnşaat MühendisliğiKastamonu Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ HAKAN ÇAĞLAR

  2. The effect of nano-silica on the gas permeability, durability and mechanical properties of high strength lightweight aggregate concrete

    Nano-silikanın, yüksek dayanımlı hafif agregalı betonlar üzerinde, gaz geçirgenliği, ışlenebilirlik ve mekanik özelliği etkileri

    MOHAMMED LAYTH ABBAS

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    İnşaat MühendisliğiGaziantep Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. NİHAT ATMACA

    YRD. DOÇ. DR. ADEM ATMACA

  3. Polistren agregalı hafif beton üzerine deneysel bir çalışma

    An experimental study on aggregate polystyrene lightweight concrete

    GÜNDÜZ ŞULE

    Yüksek Lisans

    Türkçe

    Türkçe

    2007

    MimarlıkGazi Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. GÜLSER ÇELEBİ

  4. Hafif agregalı betonun boşluk yapısının mekanik ve fiziksel özelliklere etkisi

    The effect of pore structure on mechanical and physical properties of lightweight aggregate concrete

    NİHAT KABAY

    Doktora

    Türkçe

    Türkçe

    2009

    İnşaat MühendisliğiYıldız Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. FEVZİYE AKÖZ

  5. Hafif betonlarda agrega konsantrasyonunun mekanik özelliklere etkisi

    Infuluence of aggregate volume concentration on the mechanical properties of lightweight concretes

    AYDIN ARDA

    Yüksek Lisans

    Türkçe

    Türkçe

    1994

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. M. ALİ TAŞDEMİR