Geri Dön

Modifiye edilmiş kitosandan elektrospin yöntemiyle liflerin elde edilmesi, karakterizasyonu ve biyofilm oluşumuna etkilerinin incelenmesi

Fabrication of fibers by electrospinning method from the modified chitosan, characterization and investigation of their effects on biofilm formation

  1. Tez No: 410790
  2. Yazar: NESLİHAN NOHUT MAŞLAKCI
  3. Danışmanlar: PROF. DR. AYŞEGÜL ÖKSÜZ
  4. Tez Türü: Doktora
  5. Konular: Biyoteknoloji, Kimya, Biotechnology, Chemistry
  6. Anahtar Kelimeler: Biyofilmler, Biyopolimerler, Elektroeğirme yöntemi, Kitosan, Kuvars kristal, Lifler, Biofilms, Biopolymers, Electrospinning method, Chitosan, Quartz crystal, Fibers
  7. Yıl: 2015
  8. Dil: Türkçe
  9. Üniversite: Süleyman Demirel Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu çalışmada, plazma modifiyeli kitosan yapısına kimyasal ve plazma grafting (aşılama) yöntemleri ile farklı yapılardaki monomerlerin bağlanması, yapıların karakterizasyonu, nanofiberlerin eldesi ve biyofilm oluşumuna etkileri QCM yöntemi ile incelenmiştir. Elde edilen modifiyeli yapılar: plazma modifiyeli kitosan-N-(5-(4-metoksi-fenil)-furan-2-ilmetilen)-N'-fenil-hidrazin (pkito-NMPF), plazma modifiyeli kitosan-5-metil-4-fenil-tiyofen-3-karbosilik asit (pkito-MFTKA), plazma modifiyeli kitosan-4-(tiyofen-2-sülfonilamino)-benzoik asit (pkito-TSABA), tiyofen plazma modifiyeli kitosan (pkito-PTh), furan plazma modifiyeli kitosan (pkito-PFu) ve 3,4-Etilendioksitiyofen plazma modifiyeli kitosan (pkito-PEDOT) olarak adlandırılmıştır. Bu çalışma üç aşamadan oluşmaktadır. Öncelikle, pkito film üzerine kimyasal grafting (aşılama) ile NMPF, MFTKA ve TSABA; tiyofen, furan ve EDOT monomerleri ise, pkito nanotozlar üzerine plazma grafting ile bağlandı. Elde edilen yapılar, Fourier Çevirimli İnfrared Spektroskopisi (FTIR), X-Işını Fotoelektron Spektroskopisi (XPS) ve Floresans Spektroskopisi yöntemleri ile karakterize edildi. İkinci aşamada, modifiye yeni kitosan türevlerinin nanofiberleri, elektrospin tekniği ile elde edildi. Aynı zamanda bu fiberler QCM elektrot üzerine in situ biriktirilerek, zamana bağlı kütle-frekans değişimleri incelendi. Taramalı elektron mikroskopisi (SEM) ve termogravimetrik analiz (TGA) yöntemleri elektrospun nanofiberleri karakterize etmek için kullanıldı. Üçüncü aşamada, modifiyeli kitosan fiberler ile kaplanmış QCM elektrotların, P. aeruginosa (Gram negatif bakteri, PAO1) tarafından oluşan biyofilm oluşumuna karşı etkileri QCM yöntemi ile incelendi ve her örnek için karşılaştırıldı. Sonuç olarak, örneklerin biyo-aktiviteleri; pkito-NMPF<pkito-MFTKA<pkito-TSABA<pkito-PFu<pkito-PTh<pkito-PEDOT olarak belirlenmiştir. Sonuçlar, pkito-NMPF, pkito-MFTKA ve pkito-PFu'nun biyomedikal uygulamalar için iyi bir aday olabileceğini göstermiştir.

Özet (Çeviri)

This study, the plasma modified chitosan structure, the binding of monomers from different structures with chemical and plasma grafting (grafting) method, the characterization of structures, involves investigation by the QCM method of the preparation of nanofibres and the effects of biofilm formation. The resulting, modified structures: plasma modified chitosan-N-(5-(4-methoxy-phenyl) furan-2-ylmethylene)-N'-phenyl-hydrazine (pchito-NMPF), plasma modified chitosan-5-methyl-4-phenyl-thiophene-3-carboxylic acid (pchito-MFTKA), plasma modified chitosan-4-(thiophene-2-sulfonylamino)-benzoic acid (pchito-TSABA), thiophene plasma modified chitosan (pchito-PTh), furan plasma modified chitosan (pchito-PFu) and 3,4-ethylenedioxythiophene plasma modified chitosan (pchito-PEDOT) has been called. This study consists of three stages. In the first stage, NMPF, MFTKA and TSABA with the chemical grafting on pchito film; thiophene, furan and EDOT monomers with the plasma grafting onto the pchito nano powders were mounted. The resulting structures, Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Photoelectron Spectroscopy (XPS) and Fluorescence Spectroscopy analysis were characterized. In the second stage, the nanofibers of modified new chitosan derivatives were obtained by the electrospinning technique. At the same time, these fibers in situ accumulating on QCM electrode examined mass-frequency changes in dependent on time. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) methods were used to characterize electrospun nanofibres. In the third stage, the effects against biofilm formation from P. aeruginosa (Gram-negative bacteria, PAO1) of coated QCM electrodes with modified chitosan fibers has been examined with QCM method and compared for each sample. Consequently, bioactivities of samples was determined as pchito-NMPF<pchito-MFTKA<pchito-TSABA<pchito-PFu<pchito-PTh<pchito-PEDOT. Results, pchito-NMPF, pchito-MFTKA and pchito-PFu showed that it can be a good candidate for biomedical applications.

Benzer Tezler

  1. Sorption of As(V) from waters by use of novel amine-containing sorbents prior to HGAAS and ICP-MS determination

    Sulardaki As(V)'in HGAAS ve ICP-MS ile tayini öncesi amin içerikli yeni adsorbanların kullanımıyla sorpsiyonu

    EZEL BOYACI

    Yüksek Lisans

    İngilizce

    İngilizce

    2008

    Kimyaİzmir Yüksek Teknoloji Enstitüsü

    Kimya Ana Bilim Dalı

    PROF. DR. AHMET E. EROĞLU

  2. Tabaka tabaka kaplama metodu kullanılarak hazırlanan ilaç yüklü kontak lenslerden kontrollü ilaç salımı

    Controlled drug release from contact lenses prepared by usi̇ng the layer-by-layer method

    NİHAN ERCİOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Kimya MühendisliğiHacettepe Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. NİHAL AYDOĞAN

  3. Kitosan esaslı biyopolimerik adsorbanların sentezi ve boyar madde gideriminde kullanımının incelenmesi

    Syhthesis of chitosan based bio-polimeric adsorbents and investigestion of their usage in dye removal

    NUREN ÖZTÜRK

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Kimya Mühendisliğiİstanbul Üniversitesi-Cerrahpaşa

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. TÜLİN BANU İYİM

    DOÇ. DR. SERKAN EMİK

  4. Kitosan yüzeyine ağır metal adsorpsiyonu

    Heavy metal adsorption onto the surface of chitosan

    LEVENT ÖZCAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    KimyaAnadolu Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. HAYRETTİN TÜRK

  5. Kitosanla kaplama ve modifiye atmosfer ambalajlamanın palamut (Sarda sarda) filetolarının kimyasal parametreleri üzerine etkisi

    Effect of chitosan coating and modified atmosphere packaging on chemical properties of atlantic bonito (Sarda sarda) fillets

    CÜNEYT MUŞABAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2008

    Su ÜrünleriAtatürk Üniversitesi

    Su Ürünleri Ana Bilim Dalı

    DOÇ. DR. ŞÜKRİYE ARAS HİSAR