Farklı üretim tekniklerinin zirkonya esaslı restorasyonların optik özelliklerine etkisinin incelenmesi
Investigation the effect of different fabrication techniques on optical properties of zirconia-based restorations
- Tez No: 406965
- Danışmanlar: PROF. DR. FİLİZ AYKENT
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Dental materyaller, Dental porselen, Dental restorasyon, Diş renk değişikliği, Optik özellikler, Zirkonyum, Dental materials, Dental porcelain, Dental restoration, Tooth discoloration, Optical properties, Zirconium
- Yıl: 2015
- Dil: Türkçe
- Üniversite: Selçuk Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu in-vitro çalışmada dört farklı veneerleme tekniği ve tam kontur tekniğinin zirkonya esaslı seramiklerin renk, translusens, opalesans ve floresans özelliklerine etkisinin incelenmesi amaçlanmıştır. Altmış adet disk şeklindeki örnek (10 mm çap; 0,5±0,01 mm kalınlık) zirkonya bloklardan üretildi ve sinterlendi. Örnekler veneerleme tekniğine göre rastgele 4 gruba ayrıldı (n=15): Tabakalama (T), Presleme (P), Cut-back (CB), CO (CO). T, P ve CB grubundaki zirkonya altyapılara ZirLiner uygulandı. T grubundaki örnekler nano-florarapatit veneer seramiği ile veneerlendi. P grubundaki örnekler florarapatit cam seramik ingotlar ile ısı ve basınç altında preslendi. CB grubundaki örnekler önce presleme ingotları ısı ve basınç altında preslendi. Ardından mine seramiği ile kaplandı. CO grubu için veneer seramikleri lityum disilikat cam seramik bloklardan CAD/CAM ünitesi ile tasarlanarak frezelendi. Lityum disilikat veneer seramiği ile zirkonya altyapı bir cam füzyon seramiği ile birleştirildi ve kristalize edildi. Tam kontur zirkonya grubu (TK) örnekleri zirkonya bloklardan üretildi. Renklendirme likiti uygulandı ve ardından sinterlendi. Örneklerin renk parametreleri (L*a*b*) bir spektrofotometre ile ölçülerek; renk farkı (ΔE), translusens parametresi (TP), opalesans parametresi (OP) ve floresans değerleri hesaplandı. Sonuçların analiz edilmesi için tek-yönlü ANOVA ve Kruskal-Wallis testleri, Tukey HSD ve Bonferonni testleri çoklu karşılaştırma ile birlikte kullanıldı (P<0,05). Grupların ΔE değerleri arasında önemli fark bulunmuştur (P<0,05). ΔE değerleri T, P, CB, CO ve TK grupları için sırasıyla 4,47; 2,11; 3,75; 2,86 ve 2,34 olarak tespit edilmiştir. T ve CB gruplarında renk farkı klinik olarak kabul edilemez düzeydedir (ΔE>3,7). Grupların TP değerleri arasında önemli önemlidir (P<0,05) ve TP değerleri CO>P>CB>T>TK şeklinde sıralanmıştır. Grupların OP değerleri arasında önemli fark bulunmuştur (P<0,05) ve grupların OP değerleri P>CO>CB>T>TK şeklinde sıralanmıştır. TP değerleri ile OP değerleri arasında güçlü korelasyon bulunmuştur (r2=0,861). Grupların floresans değerleri arasında önemli fark bulunmuştur (P<0,05) ve grupların floresans sıralaması TK>T>CO>P>CB şeklinde olmuştur. TP ile floresans değerleri arasında (r2= 0,151) ve OP ile floresans değerleri arasında önemli korelasyonlar bulunmuştur (r2=0,227). Zirkonya esaslı tam seramiklerin optik özellikleri üretim tekniklerinden önemli derecede etkilenmektedir. Bu nedenle hastaların klinik durumuna uygun tekniğin ve seramik tipinin seçimi önemlidir.
Özet (Çeviri)
The aim of this in-vitro study was to investigate the effect of four different veneering techniques and full-contour zirconia tecnique on the color, translucency, opalescence and fluorescence properties of zirconia-based systems. Sixty disc-shaped specimens (10 mm diameter, 0,5±0,01 mm thickness) were fabricated from zirconia blocks and sintered. Specimens were randomly devided into 4 groups according to veneering techniques (n=15): Layering (L), Pressing (P), Cut-back (CB) and CAD-on (CO). ZirLiner was applied to the L, P and CB groups. Specimens in group L were veneered with nano-fluorapatite veneering ceramic. Specimens in group P were heat-pressed with fluorapatite glass-ceramic ingots. Specimens in group CB were heat-pressed with pressing ingots and than veneered with enamel veneering ceramic. In group CO the veneering ceramics were designed with and milled from lithium disilicate glass-ceramic blocks in CAD/CAM unit. Lithium disilicate veneering ceramics and zirconia frameworks were fused to each other by a glass-fusion ceramic and crystallized. Full-contour zirconia group (FZ) specimens were fabricated from zirconia blocks (10 mm diameter; 1,5±0,01 mm thickness). Coloring liqud was applied and than sintered. Color parameters (L*a*b*) were measured with a spectrophotometer and color difference (ΔE), translucency parameter (TP), opalescence parameter (OP) and fluorescence properties were calculated. The results were analyzed with One-way ANOVA and Kruskal-Wallis tests with Tukey HSD and Bonferonni multiple comprasison tests (P<0,05). There were significant differences between the ΔE of the groups (P<0,05). ΔE values for groups L, P, CB, CO and FZ were 4,47; 2,11; 3,75; 2,86 and 2,34 respectively. There were unacceptable color differences in L and CB groups (ΔE>3,7). There were significant differences between the TP values of the groups (P<0,05) and listed as CO>P>CB>L>FZ. There were significant differences between the OP values of the groups (P<0,05) and listed as P>CO>CB>L>FZ. There were strong correlastions between TP and OP values (r2=0,861). There were significant differences between the flourescence values of the groups (P<0,05) and listed as FZ>L>CO>P>CB. There were significant correlations between TP and fluorescence values (r2= 0,151) and between OP and fluorescence values (r2=0,227). Optical properties of the zirconia-based systems are greatly affected by the fabrication techniques. Therefore selection of appropriate technique and ceramic type is important for clinical conditions of the patients.
Benzer Tezler
- Titanyum oksit ilaveli alümina zirkonya kompozitlerinin spark plazma sinterleme yöntemi ile üretimi ve karakterizasyonu
Production and characterization of the addition of TiO2 on alumina zirconia composites prepared by spark plasma sintering
ÖZDEN ORMANCI
Yüksek Lisans
Türkçe
2012
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLTEKİN GÖLLER
- Çok katmanlı ve fonksiyonel derecelendirilmiş CYSZ/Gd2Zr2O7 esaslı yeni nesil termal bariyer kaplamaların üretimi ve karakterizasyonu
Processing and characterization of multilayered and functionally graded CYSZ/Gd2Zr2O7 based new generation thermal barrier coatings
MUSTAFA GÜVEN GÖK
Doktora
Türkçe
2015
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLTEKİN GÖLLER
- Farklı üst yapı tekniklerinin zirkonyum alt yapılı tam seramik restorasyonlarının rengine ve makaslama bağlanma dayanımına etkisi
The effect of different veneering techniques on and shear bond strength of zirconium the color based all-ceramic restorations
RAFAT SASANY
Doktora
Türkçe
2019
Diş HekimliğiOndokuz Mayıs ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. DUYGU SARAÇ
- Farklı tekniklerle yapılan multilayer restoratif uygulamaların dayanımlarının araştırılması
Research of the strength of multilayer restorative applications based on different techniques
ERHAN DEMİR
Doktora
Türkçe
2015
Diş HekimliğiYüzüncü Yıl ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. GÜRCAN ESKİTAŞCİOĞLU
- Eşzamanlı karbondioksit kullanımı ve hidrojen dönüşümü için nikel-demir bazlı katalizör üzerinde karbondioksitten metan eldesi
CO2 to methane over nickel-iron based catalyst for simultaneous CO2 utilization and hydrogen conversion
BUKET KAPLAN
Yüksek Lisans
Türkçe
2023
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALPER SARIOĞLAN
PROF. DR. ŞAHİKA SENA BAYAZİT